Get started
Author

Reiichi Suzuki

Observed names: R. Suzuki, Reiichi SUZUKI
Institution: Kobe Steel (Japan)
ORCID: 0000-0002-2776-7338
Observed ORCID: 0000-0002-2776-7338
OpenAlex ID: A5066997122
Fracture modeling of resistance spot welded ultra-high-strength steel considering the effect of liquid metal embrittlement crack
2021 · Yunwu Ma, Yang Yu, et al. · Materials & Design · 41
Spatter And Fume Reduction In Co2 Gas- Shielded Arc Welding By Regulated Globular Transfer
2012 · Kei Yamazaki, Reiichi Suzuki, et al. · Welding in the World · 19
Relationship between penetration and porosity in horizontal fillet welding by a new process “hybrid tandem MAG welding process”
2016 · Yimin Yuan, Kei Yamazaki, et al. · Welding in the World · 14
Investigating delayed cracking behaviour in laser welds of high strength steel sheets using an X-ray transmission in-situ observation system
2020 · K. Maeda, R. Suzuki, et al. · Science and Technology of Welding & Joining · 13
Influences of cold-sprayed steel interlayer on mechanical properties of laser welded steel/Al lap joints
2023 · Kyohei Maeda, Yuji Sato, et al. · Journal of Materials Processing Technology · 12
Aluminum-steel dissimilar robotic arc spot welding with auxiliary insert
2019 · Reiichi Suzuki, Chin Ryo · Welding in the World · 9
Research and Development on the Welding Process for Reducing Diffusible Hydrogen
2018 · Naoki MUKAI, Tokuji MARUYAMA, et al. · QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY · 9
PDF
Blowhole Generation Phenomenon and Quality Improvement in GMAW of Galvanized Steel Sheet
2013 · Shun Izutani, Kei Yamazaki, et al. · International Journal of Automation Technology · 9
Development of gas shielded arc welding process to achieve a very low diffusible hydrogen content in weld metals
2016 · Naoki Kawabe, Tokuji Maruyama, et al. · Welding in the World · 8
State of the art of process control of molten droplet and pool in gas metal arc welding
2011 · Reiichi Suzuki · Welding International · 7
Development of the innovative GMA wire improving the flow direction of molten pool
2009 · Yu UMEHARA, Reiichi SUZUKI, et al. · QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY · 7
PDF
Laser lap joining of high-strength steel to aluminum with cold sprayed steel coating
2021 · Kyohei Maeda, Yuji Sato, et al. · Journal of Laser Applications · 6
Research on the Effects of Welding-wire-related Factors Affecting Diffusible Hydrogen Content
2017 · Naoki MUKAI, Reiichi SUZUKI · QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY · 5
PDF
Relationship between penetration and porosity in horizontal fillet welding
2015 · Yimin YUAN, Kei YAMAZAKI, et al. · QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY · 5
PDF
Development of deep penetration & low spatter hybrid tandem GMAW process
2012 · Yimin Yuan, Kei Yamazaki, et al. · Prep.Nat.Meet.JWS · 5
Study of wind-toughness of metal arc welding with reference to multi-pass weld metal quality
2016 · Reiichi Suzuki, Shuji Sasakura, et al. · Welding International · 4
An estimation of factors influencing residual stress characteristics of fillet welded lap joints
2017 · Takuya Nagai, Ryu Kasai, et al. · Welding International · 3
Welding Process and Consumables Aimed at Improving Fatigue Strength of Joints
2016 · Miyata Minoru, Reiichi Suzuki · 3
Improvement of the deformation capacity of the column-to-beam joint by the reinforce welding method around the scallop bottom
2014 · Reiichi SUZUKI, Tetsuo SUGA, et al. · QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY · 3
PDF
Behavior of melt flow and porosity formation in laser welding of steel to aluminum with cold-sprayed steel interlayer
2022 · Kyohei Maeda, Yuji Sato, et al. · Journal of Laser Applications · 2
Steel and Aluminum Dissimilar Metals Joining Process -Element Arc Spot Welding- and its Automation
2019 · Reiichi SUZUKI · JOURNAL OF THE JAPAN WELDING SOCIETY · 2
Improvement of the deformation capacity o the column-to-beam joint by the reinforce welding method around the scallop bottom
2016 · Reiichi Suzuki, Tetsuo Suga, et al. · Welding International · 2
Study of wind-toughness in consideration of multi-pass weld metal quality about Gas Metal Arc Welding
2014 · Reiichi SUZUKI, Shuji SASAKURA, et al. · QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY · 2
PDF
Study of Mag Welding Without Steel-backing for Joints of Steel Structures
2013 · Tetsuo SUGA, Ryu KASAI, et al. · Journal of Structural and Construction Engineering (Transactions of AIJ) · 2
PDF
Blowholes reduction in GMAW of galvanized steel sheet : Part2 : Influence of shielding gas and pulse current control
2012 · K. Nakamura, Yuji Ueda, et al. · 溶接学会全国大会講演概要 · 2
Works count: 41
Citation count: 201
H-index: 8
I10-index: 5
Year
Topic
Type