Author

Xian Wu

Institutions: Guizhou Institute of Technology, South China University of Technology

Observed institutions: Xi'an University of Science and Technology, Huaqiao University, Harbin University, Harbin Engineering University, Tianjin Fire Research Institute, Guizhou Institute of Technology, Ministry of Emergency Management of the People's Republic of China, Changsha University of Science and Technology, South China University of Technology

ORCID: 0000-0002-6863-1701

Observed ORCID: 0000-0002-6863-1701

OpenAlex ID: A5069690314

Scalable fabrication of thermally conductive elastomer/boron nitride nanosheets composites by slurry compounding

2015 · Xian Wu, Heng Liu, et al. · Composites Science and Technology · 98

Constructing three‐dimensional boron nitride network for highly thermally conductive epoxy resin composites

2022 · Xian Wu, Wei Liu, et al. · Polymer Composites · 57

Flexibly Controlling the Polycrystallinity and Improving the Foaming Behavior of Polylactic Acid via Three Strategies

2022 · Wei Liu, Xian Wu, et al. · ACS Omega · 38

CNT @ LDH functionalized poly(lactic acid) membranes with super oil–water separation and real‐time press sensing properties

2022 · Wei Liu, Xian Wu, et al. · Polymer Composites · 35

Enhancing foamability and flame‐retardancy of polylactic acid bead foams through inter‐beads bulk polymerization and continuous phase dispersion of LDHs

2024 · Wei Liu, Xian Wu, et al. · Journal of Polymer Science · 25

In Situ Emulsion Polymerization Strategy on Basalt Fibers to Enhance the 3D Printability and the Mechanical Property of Polypropylene

2025 · Wei Liu, Xian Wu, et al. · Polymer Engineering and Science · 21

Mechanical behavior and microstructural evolution of a bainite-based quenching-partitioning (BQ&P) steel under high strain rates

2021 · Xian Wu, Fengchun Jiang, et al. · Materials Science and Engineering A · 21

Highly thermally conductive boron nitride@UHMWPE composites with segregated structure

2020 · Xian Wu, Wei Liu, et al. · e-Polymers · 21

PDF

Facile fabrication of oriented polyethylene terephthalate foams as novel solar interfacial vapor generator from waste bottles

2024 · Wei Liu, Xian Wu, et al. · Journal of Applied Polymer Science · 18

Electrically conductive and light-weight branched polylactic acid-based carbon nanotube foams

2021 · Wei Liu, Xian Wu, et al. · e-Polymers · 17

PDF

Silver Nanoparticle Decorated Boron Nitride for Reducing Interfacial Thermal Resistance in Thermal Conductivity Epoxy Resin Composite

2025 · Xian Wu, Wei Liu, et al. · Journal of Applied Polymer Science · 14

Cyclic deformation behaviors and microstructure evolution mechanisms of 42CrMo steels under different heat-treatment states

2024 · Guoying Sui, Xuming Fang, et al. · Engineering Failure Analysis · 14

Construction of alumina framework with a sponge template toward highly thermally conductive epoxy composites

2024 · Xian Wu, Wei Liu, et al. · Polymer Engineering and Science · 14

Constructing small‐sized oriented pores and an ultrathin photothermal conversion layer to boost solar‐driven interfacial evaporation

2025 · Wei Liu, Xian Wu, et al. · Polymer International · 12

Grafting rubber chains onto boron nitride nanosheets for highly flexible, thermally conductive composites

2018 · Xian Wu, Wei Liu, et al. · European Polymer Journal · 12

Preparation and characterization of PLA foam chain extended through grafting octa(epoxycyclohexyl) POSS onto carbon nanotubes

2020 · Wei Liu, Xunxian Zhu, et al. · Cellular Polymers · 11

Characterization of Emulsion Wax Curing Agent as Bond-Breaker Medium in Jointed Concrete Pavement

2009 · Jialiang Yao, Jianbo Yuan, et al. · Journal of Performance of Constructed Facilities · 11

Fire experiments on cold-formed steel square tubular columns with new gypsum sheathing configuration

2024 · Liang Yin, Rui Li, et al. · Thin-Walled Structures · 9

A facile and clean strategy to manufacture functional polylactic acid bead foams

2023 · Wei Liu, Xian Wu, et al. · Materials Today Communications · 9

Constructing Porous Alumina Frameworks by Sintering for Enhanced Thermal Conductivity of Polymer Composites

2022 · Xian Wu, Wei Liu, et al. · ACS Omega · 9

Preparation of Antibacterial and Strengthened High-Density Polyethylene Composites via Compounding with Silver Ion Glass Microbead-Loaded Basalt Fiber

2021 · Wei Liu, Xian Wu, et al. · Journal of Materials Engineering and Performance · 9

Preparation of lightweight PBS foams with high ductility and impact toughness by foam injection molding

2024 · Jiangbin Xu, Jinfu Xing, et al. · e-Polymers · 5

Fabrication of silver ions aramid fibers and polyethylene composites with excellent antibacterial and mechanical properties

2022 · Wei Liu, Xian Wu, et al. · e-Polymers · 5

PDF

Ti‐Al 3 Ti Metal‐Intermetallic Laminate Composites: A Review of Microstructure, Properties, and Modifications

2025 · Dongshen Huo, Zhenqiang Wang, et al. · Advanced Engineering Materials · 4

Impact of Mixing State of Gas–Melt Mixture on Foaming Behavior During the Plastication Process in Foamed Injection Molding

2025 · Jie Lei, Zhangqin Mu, et al. · Polymer Engineering and Science · 2

Works count: 32

Citation count: 494

H-index: 13

I10-index: 17