Get started
Author

Pankaj Charan Jena

Observed names: Dr. Pankaj Charan Jena, P. C. Jena, PANKAJ CHARAN JENA, Pankaj C Jena, Pankaj C. Jena, Pankaj Charan Jena*, Pankaj Jena
ORCID: 0000-0002-3837-7626
Observed ORCID: 0000-0002-3837-7626
OpenAlex ID: A5070183176
Turning of hardened AISI H13 steel with recently developed S3P-AlTiSiN coated carbide tool using MWCNT mixed nanofluid under minimum quantity lubrication
2022 · Sitesh Mahapatra, Anshuman Das, et al. · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · 73
Investigations on Surface Integrity in Hard Turning of Functionally Graded Specimen under Nano Fluid Assisted Minimum Quantity Lubrication
2021 · Subhadip Pradhan, Sudhansu Ranjan Das, et al. · Advances in Materials and Processing Technologies · 43
Machining performance evaluation under recently developed sustainable HAJM process of zirconia ceramic using hot SiC abrasives: An experimental and simulation approach
2021 · Subhadip Pradhan, Sudhansu Ranjan Das, et al. · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · 40
Dynamic Investigation of FRP Cracked Beam Using Neural Network Technique
2019 · Pankaj Charan Jena, Dayal R. Parhi, et al. · Journal of Vibration Engineering & Technologies · 35
Dynamic Study of Composite Cracked Beam by Changing the Angle of Bidirectional Fibres
2016 · P. C. Jena, D. R. Parhi, et al. · Iranian Journal of Science and Technology Transactions A Science · 34
Free and forced vibration analysis of flyash/graphene filled laminated composite plates using higher order shear deformation theory
2021 · Sarada P Parida, Pankaj C Jena · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · 33
Experimental investigation on machining of hardstone quartz with modified AJM using hot silicon carbide abrasives
2020 · Subhadip Pradhan, Sudhansu Ranjan Das, et al. · Journal of the Brazilian Society of Mechanical Sciences and Engineering · 33
Dynamics of rectangular laminated composite plates with selective layer-wise fillering rested on elastic foundation using higher-order layer-wise theory
2022 · Sarada P Parida, Pankaj C Jena, et al. · Journal of Vibration and Control · 31
MACHINING OF HARDSTONE QUARTZ WITH MODIFIED AJM PROCESS USING HOT SiC ABRASIVES: ANALYSIS, MODELING, OPTIMIZATION, AND COST ANALYSIS
2020 · SUBHADIP PRADHAN, SUDHANSU RANJAN DAS, et al. · Surface Review and Letters · 29
Experimental investigation and optimization on machined surface of Si3N4 ceramic using hot SiC abrasive in HAJM
2021 · Subhadip Pradhan, Debabrata Dhupal, et al. · Materials Today Proceedings · 28
Free vibration analysis of short bamboo fiber based polymer composite beam structure
2018 · Pankaj Charan Jena · Materials Today Proceedings · 28
Selective layer-by-layer fillering and its effect on the dynamic response of laminated composite plates using higher-order theory
2022 · Sarada Prasad Parida, Pankaj Charan Jena · Journal of Vibration and Control · 27
Fabrication, Characterization and Drilling Operation of Natural Fiber Reinforced Hybrid Composite With Filler (Fly-Ash/Graphene)
2019 · Pranav Kumar Saraswati, Saritprava Sahoo, et al. · International Journal of Innovative Technology and Exploring Engineering · 26
Generation of Effusion Holes on Ultra-high Temperature Alloy by Micro Electro-discharge Machining Process
2023 · DEBABRATA DHUPAL, DEBASISH PANIGRAHI, et al. · Surface Review and Letters · 25
Identification of Crack in SiC Composite Polymer Beam Using Vibration Signature
2018 · Pankaj Charan Jena · Materials Today Proceedings · 23
An Overview: Different Manufacturing Techniques used for Fabricating Functionally Graded Material
2019 · Sarada Prasad Parida, Pankaj Charan Jena · Materials Today Proceedings · 22
Experimental Investigation and Sustainability Assessment in Turning of Newly Developed AMMC (Al–Mg–Si–Cu–SiC) Using Coated Carbide Tool Under Minimum Quantity Lubrication
2025 · Elun Sekhar Barik, Pankaj Charan Jena, et al. · Arabian Journal for Science and Engineering · 20
Transverse vibration of laminated-composite-plates with fillers under moving mass rested on elastic foundation using higher order shear deformation theory
2024 · Sarada Prasad Parida, Pankaj Charan Jena, et al. · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · 20
FGM Beam analysis in Dynamical and Thermal surroundings using Finite Element Method
2019 · Sarada Prasad Parida, Pankaj Charan Jena, et al. · Materials Today Proceedings · 19
Fabrication of geopolymer composites using egg-shell and fly-ash: Comparison between the strength and stability, physio-chemical and mechanical properties
2024 · Sarada Prasad Parida, Pankaj Charan Jena, et al. · Process Safety and Environmental Protection · 18
Comparative stress analysis of different suitable biomaterials for artificial hip joint and femur bone using finite element simulation
2021 · Sarada Prasad Parida, Pankaj Charan Jena, et al. · Advances in Materials and Processing Technologies · 17
Preparation of epoxy-glass composites with graphene and flyash filler
2020 · Sarada Prasad Parida, Pankaj Charan Jena · Materials Today Proceedings · 17
A Review of Current Researches on Powder Mixed Electrical Discharge Machining (PMEDM) Technology
2020 · Pradipta Kumar Rout, Pankaj Charan Jena · Lecture notes in mechanical engineering · 16
Investigation on MRR and DOC of the micro-holes generated on quartz using silicon carbide by FB-HAJM
2020 · Subhadip Pradhan, Sourav Sanket Tripathy, et al. · Materials Today Proceedings · 16
Prediction of multiple transverse cracks in a composite beam using hybrid RNN-mPSO technique
2024 · Sarada Prasad Parida, Saritprava Sahoo, et al. · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · 15
Works count: 63
Citation count: 932
H-index: 19
I10-index: 38
Year
Topic
Type