Author

K. E. Kutsevich

Observed name: K.E. Kutsevich

Institutions: Kurchatov Institute, All Russian Scientific Research Institute of Aviation Materials

Observed institutions: Kurchatov Institute, All Russian Scientific Research Institute of Aviation Materials, State Research Center of the Russian Federation

OpenAlex ID: A5070738058

A study of epoxide–polysulfone polymer systems for high-strength adhesives of aviation purpose

2017 · E. N. Kablov, L. V. Chursova, et al. · Polymer Science Series D · 25

Adhesive prepregs and composite materials on their basis

2011 · N. F. Lukina, L. A. Dement’eva, et al. · Russian Journal of General Chemistry · 17

Properties of composite materials based on adhesive prepregs

2013 · L. A. Dement’eva, A. A. Serezhenkov, et al. · Polymer Science Series D · 12

The properties and use of a VK-36RM adhesive for aircraft engineering

2014 · K. E. Kutsevich, L. A. Dement’eva, et al. · Polymer Science Series D · 9

Influence of fillers on properties of adhesive prepregs and PCM on their basis

2017 · K.E. Kutsevich, T.Yu. Tyumeneva, et al. · Aviacionnye materialy i tehnologii · 7

Adhesive prepregs as promising materials for parts and assemblies from polymeric composite materials

2017 · K.E. Kutsevich, L.A. Dementeva, et al. · Aviacionnye materialy i tehnologii · 6

A study of the rheological properties of adhesive binders

2016 · T. A. Kirienko, N. F. Lukina, et al. · Polymer Science Series D · 6

Carbon Fabrics for Aircraft Products

2020 · A.I. Sidorina, A.M. Safronov, et al. · Proceedings of VIAM · 5

Mathematical modeling of temperature fields with consideration for curing kinetics of thick-walled fiberglass plate

2017 · D. Ya. Barinov, P. S. Marakhovsky, et al. · Inorganic Materials Applied Research · 5

Properties of an epoxy structural film adhesive modified by polysulfones

2017 · L. A. Dement’eva, K. E. Kutsevich, et al. · Polymer Science Series D · 5

Development of a production process for a radio-transparent fairing from glue prepregs of KMMS-2m.120 type

2013 · Yu. I. Khrychev, E. P. Shkodinova, et al. · Polymer Science Series D · 5

Adhesive Prepregs Based on Tissue Porsher – Perspective Materials for Parts and Units Out of Polymeric Composite Materials

2014 · N.F. Lukina, L.A. Dement’eva, et al. · Proceedings of VIAM · 4

Evaluation Method and Factors Influencing the Bonding Quality Between Face and Honeycomb Cores in Floor and Interior Aircraft Panels

2020 · P.V. Shershak, N.O. Yakovlev, et al. · Aviacionnye materialy i tehnologii · 3

Properties and application of polymer composite materials based on glue prepregs

2016 · K.E. Kutsevich, L.A. Dementeva, et al. · Proceedings of VIAM · 3

Properties and Appointment of Composite Materials Based on Adhesive Prepregs

2014 · L.A. Dement’eva, A.A. Serezhenkov, et al. · Proceedings of VIAM · 3

Optimization of honeycomb sandwich floor panels made of polymer-matrix low-combustible composite materials based on high-strength carbon and glass fibers and adhesive binder

2020 · V. A. Komarov, K. E. Kutsevich, et al. · Вестник Самарского государственного аэрокосмического университета им. академика С.П. Королёва (национального исследовательского университета) · 2

PDF

On the possibility of using of materials based on adhesive prepregs in Arctic conditions

2016 · A. P. Petrova, L. A. Dement’eva, et al. · Polymer Science Series D · 2

Development of Adhesive Composite Material Based on Umt49s-12k-ep Alternative Carbon Filler and Vsk-14-3 Adhesive Binder

2020 · A.I. Starkov, K.E. Kutsevich, et al. · Proceedings of VIAM · 1

A method of determining the strength of silver-coating adhesion to a silicon support using glue

2014 · V. I. Lukin, V. S. Rylnikov, et al. · Polymer Science Series D · 1

A method for determining the bonding strength of a silver coating with a silicon substrate

2014 · V.I. Lukin, V.S. Rylnikov, et al. · Welding International · 1

Low-Flammability Polymer Composites Based on Adhesive Prepregs. Part 1. Microstructure of Carbon and Glass Fiber Reinforced Plastics

2026 · A. I. Starkov, A. Yu. Isaev, et al. · Polymer Science Series D

Developments in the Field of Fast-Curing Cold-Setting Adhesives (Review)