Get started
Author

Asunción Rivero

Observed names: A Rivero, A. Rivero, Asun Rivero, Asuncion RIVERO, Asuncion Rivero, Rivero, Asunción
Institution: Tecnalia
ORCID: 0000-0002-5373-0221
Observed ORCID: 0000-0002-5373-0221
OpenAlex ID: A5071047355
Analysis of ultrasonic-assisted drilling of Ti6Al4V
2009 · J. Pujana, A. Rivero, et al. · International Journal of Machine Tools and Manufacture · 216
An experimental study on abrasive waterjet cutting of CFRP/Ti6Al4V stacks for drilling operations
2015 · A. Alberdi, T. Artaza, et al. · The International Journal of Advanced Manufacturing Technology · 152
PDF
An experimental investigation of the effect of coatings and cutting parameters on the dry drilling performance of aluminium alloys
2005 · A. Rivero, G. Aramendi, et al. · The International Journal of Advanced Manufacturing Technology · 148
The milling of airframe components with low rigidity: A general approach to avoid static and dynamic problems
2005 · S Herranz, F J Campa, et al. · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · 144
Effect of process parameter on the kerf geometry in abrasive water jet milling
2010 · A. Alberdi, A. Rivero, et al. · The International Journal of Advanced Manufacturing Technology · 127
Thin-Wall Machining of Light Alloys: A Review of Models and Industrial Approaches
2019 · Irene Del Sol, Asuncion Rivero, et al. · Materials · 125
PDF
The Use of Hybrid CO2+MQL in Machining Operations
2015 · O. Pereira, P. Català, et al. · Procedia Engineering · 108
PDF
Theoretical and experimental analysis of the dieless incremental sheet forming process
2006 · I. Cerro, E. Maidagan, et al. · Journal of Materials Processing Technology · 107
Process planning for reliable high-speed machining of moulds
2002 · L. N. López De Lacalle, A. Lamikiz, et al. · International Journal of Production Research · 84
Tool wear detection in dry high-speed milling based upon the analysis of machine internal signals
2008 · A. Rivero, L.N. López de Lacalle, et al. · Mechatronics · 67
Monitoring of drilling for burr detection using spindle torque
2005 · Begoña Peña, Gorka Aramendi, et al. · International Journal of Machine Tools and Manufacture · 65
Tribological performance of ionic liquids as additives of water-based cutting fluids
2019 · I. Del Sol, A.J. Gámez, et al. · Wear · 59
An intelligent process model: predicting springback in single point incremental forming
2014 · Muhamad S. Khan, Frans Coenen, et al. · The International Journal of Advanced Manufacturing Technology · 59
Experimental Study of the Slot Overlapping and Tool Path Variation Effect in Abrasive Waterjet Milling
2011 · A. Alberdi, A. Rivero, et al. · Journal of Manufacturing Science and Engineering · 47
Surface properties and fatigue failure analysis of alloy 718 surfaces milled by abrasive and plain waterjet
2017 · A. Rivero, A. Alberdi, et al. · The International Journal of Advanced Manufacturing Technology · 35
Mechanistic model for drills with double point-angle edges
2008 · Luis Norberto López de Lacalle, Asun Rivero, et al. · The International Journal of Advanced Manufacturing Technology · 31
Large Spiral Bevel Gears on Universal 5-axis Milling Machines: A Complete Process
2015 · A. Álvarez, L.N. López de Lacalle, et al. · Procedia Engineering · 30
PDF
Vibrations characterization in milling of low stiffness parts with a rubber-based vacuum fixture
2020 · Antonio RUBIO-MATEOS, Mikel CASUSO, et al. · Chinese Journal of Aeronautics · 22
PDF
Effects of Machining Parameters on the Quality in Machining of Aluminium Alloys Thin Plates
2019 · Irene Del Sol, Asuncion Rivero, et al. · Metals · 22
PDF
Analysis of the Effects of Tool Wear on Dry Helical Milling of Ti6Al4V Alloy
2015 · S.R. Fernández-Vidal, P. Mayuet, et al. · Procedia Engineering · 21
PDF
Development of a New Joint Geometry for FSW
2009 · M. L. Penalva, A. Otaegi, et al. · AIP conference proceedings · 12
Tool-path effect on the geometric deviations in the machining of UNS A92024 aeronautic skins
2017 · I. Del Sol, A. Rivero, et al. · Procedia Manufacturing · 10
Analysis of Alloy 718 surfaces milled by abrasive waterjet and post-processed by plain waterjet technology
2017 · A. Alberdi, A. Rivero, et al. · Procedia Manufacturing · 10
PDF
Influence of Elastomer Layers in the Quality of Aluminum Parts on Finishing Operations
2020 · Antonio Rubio-Mateos, Asuncion Rivero, et al. · Metals · 9
PDF
Flexible Machining System for an Efficient Skin Machining
2016 · Antonio Rubio, Luis Calleja, et al. · SAE technical papers on CD-ROM/SAE technical paper series · 7
Works count: 41
Citation count: 1,737
H-index: 20
I10-index: 23
Year
Topic
Type