Author

Moaz H. Ali

Observed names: Ali, Moaz H., M H Ali, M. H. Ali, Moaz H Ali

Observed institutions: King Fahd University of Petroleum and Minerals, University of Kentucky, University of Babylon, University of Kerbala, Universiti Tenaga Nasional, Bayero University Kano

ORCID: 0000-0002-5948-8683

Observed ORCID: 0000-0002-5948-8683

OpenAlex ID: A5071327788

Finite Element Modeling of Thermopiezomagnetic Smart Structures

2002 · M. Sunar, Ahmed Z. Al-Garni, et al. · AIAA Journal · 95

Taguchi design optimization of machining parameters on the CNC end milling process of halloysite nanotube with aluminium reinforced epoxy matrix (HNT/Al/Ep) hybrid composite

2013 · J.S. Pang, M.N.M. Ansari, et al. · HBRC Journal · 94

PDF

FEM to predict the effect of feed rate on surface roughness with cutting force during face milling of titanium alloy

2013 · Moaz H. Ali, Basim A. Khidhir, et al. · HBRC Journal · 47

PDF

Simulation machining of titanium alloy (Ti-6Al-4V) based on the finite element modeling

2013 · Moaz H. Ali, M. N. M. Ansari, et al. · Journal of the Brazilian Society of Mechanical Sciences and Engineering · 33

Modeling of friction stir processing using 3D CFD analysis

2009 · S. Z. Aljoaba, I. S. Jawahir, et al. · International Journal of Material Forming · 19

Effects of Coolants on Improving Machining Parameters while Mach-Inability Titanium Alloy (Ti-6Al-4V): A Review

2011 · Moaz H. Ali, R. Balasubramanian, et al. · Applied Mechanics and Materials · 6

Comparative Traditional Methods of Attributes with Fuzzy Quality Control Charts for Improving the Quality of a Product

2024 · Salman Hussien Omran, Salam Waley Shneen, et al. · Journal of Fuzzy Systems and Control · 5

PDF

Studied validation of finite element modeling for titanium alloy (Ti–6Al–4V) at face milling

2023 · Moaz H. Ali · Heliyon · 5

PDF

Investigation on Chip Formation during Machining Using Finite Element Modeling

2012 · Moaz H. Ali, Basim A. Khidhir, et al. · Advanced materials research · 4

Fuzzy-Based Clustering for Larger-Scale Deep Learning in Autonomous Systems Based on Fusion Data

2023 · Ibrahim Najem, Tabarak Ali Abdulhussein, et al. · Journal of Intelligent Systems and Internet of Things · 3

Emission Characteristics and Engine Performance from Castor Oil Methyl Ester Blends in Diesel Engine under Various Injection Pressures

2022 · Mohammed A. Fayad, Salman Hussien Omran, et al. · Journal of Advanced Research in Fluid Mechanics and Thermal Sciences · 3

PDF

Prediction of High Cutting Speed Parameters forTi-6Al-4V by Using Finite Element Modeling

2012 · Moaz H. Ali, Basim A. Khidhir, et al. · International Journal of Modeling and Optimization · 3

Finite element modelling to predict cutting parameters for milling on titanium alloy (Ti-6Al-4V)

2013 · M H Ali, B A Khidhir, et al. · Australian Journal of Mechanical Engineering · 2

Effect of Silicon Addition on the Characteristics of Nitinol Shape Memory Alloy

2025 · Abdullah D. Assi, Salman H. Omran, et al. · International Journal of Computational Methods and Experimental Measurements · 1

PDF

Investigation of Medical Image Segmentation Using Machine Learning Based Fuzzy Reliability Function for MIoT

2020 · S H Omran, M H Ali, et al. · Journal of Physics Conference Series · 1

PDF

Studying the effect of alumina on the mechanical properties of aluminum alloy prepared from waste using powder metallurgy

2019 · Salman Hussien Omran, Moaz H. Ali, et al. · International Journal of Engineering & Technology · 1

Lossy Compression of Medical Images Using Multiwavelet Transforms

2017 · Jameel, Jaleel S., Ali, Moaz H., et al. · Journal of Telecommunication Electronic and Computer Engineering (JTEC) · 1

PDF

Design Of Thermoelectric Generator from Aluminum and Copper Elements

2016 · M. A. Afolabi, M. H. Ali · IOSR Journal of Mechanical and Civil Engineering · 1

PDF

Study of Machinability for Titanium Alloy Ti-6Al-4V through Chip Formation in Milling Process

2015 · Moaz H. Ali, Ahmed Al-Saadi · World Academy of Science, Engineering and Technology, International Journal of Aerospace and Mechanical Engineering · 1

The Effect Of Nose Radius On Cutting Force And Temperature During Machining Titanium Alloy (Ti-6Al-4V)

2015 · Moaz H. Ali, M. N. M. Ansari · Zenodo (CERN European Organization for Nuclear Research) · 1

Finite Element Modeling To Predict The Effect Of Nose Radius On The Equivalent Strain (Peeq) For Titanium Alloy (Ti-6Al-4V)

2013 · Moaz H. Ali, M. N. M. Ansari, et al. · Zenodo (CERN European Organization for Nuclear Research) · 1

Finite Element Modeling for Prediction of Stress – Strain at Several Feed Rates and Cutting Speeds for Titanium (Ti-6Al-4V) Alloy

2012 · Moaz H. Ali, Basim A. Khidhir, et al. · Advanced materials research · 1

Finite Element Modeling for Prediction the Effect of Nose Radius on Cutting Forces for Titanium (Ti - 6Al - 4V) Alloy

2012 · Dpt. of Mechanical Engineering, Universiti Tenaga Nasional Putra Jaya , Malaysia, M. H. Ali, et al. · Journal of Engineering Science and Technology Review · 1

PDF

Effect of welding speed on the microstructural characteristics of fiber laser welding dissimilar joints

2024 · Salman Hussien Omran, Sadiq H. AL-Kabi, et al. · AIP conference proceedings

Finite element analysis of machining parameters in milling of Ti6AL4V

2015 · Moaz H. Ali · LAP LAMBERT Academic Publishing eBooks

Works count: 26

Citation count: 329

H-index: 6

I10-index: 5