Product
Help
Pricing
About
Jobs
Log in
Get started
Author
Add to collection
Andrzej Krauss
Observed name:
Krauss, Andrzej
Institution:
Poznań University of Life Sciences
Observed institution:
Poznań University of Life Sciences
ORCID:
0000-0001-9943-9440
Observed ORCID:
0000-0001-9943-9440
OpenAlex ID:
A5071365306
Effect of sharpness angle and feeding speed on the surface roughness during milling of various wood species
2018
·
Grzegorz Pinkowski
, Waldemar Szymański
, et al.
·
BioResources
·
29
PDF
Impact of the Heat Treatment Duration on Color and Selected Mechanical and Chemical Properties of Scots Pine Wood
2022
·
Magdalena Piernik
, Magdalena Woźniak
, et al.
·
Materials
·
28
PDF
The influence of the thermal modification of pine (Pinus sylvestris L.) wood on the creation of fine dust particles in plane milling
2019
·
Magdalena Piernik
, Tomasz Rogoziński
, et al.
·
Journal of Occupational Health
·
27
PDF
Cutting Power during Milling of Thermally Modified Pine Wood
2016
·
Andrzej Krauss
, Magdalena Piernik
, et al.
·
Drvna industrija
·
22
PDF
Effect of chip thickness, wood cross-sections, and cutting speed on surface roughness and cutting power during up-milling of beech wood
2023
·
Magdalena Piernik
, Grzegorz Pinkowski
, et al.
·
BioResources
·
15
PDF
Radial variation in tracheid lengths in dominant trees of selected coniferous species
2020
·
Ewa Fabisiak
, Beata Fabisiak
, et al.
·
BioResources
·
15
PDF
Effect of Thermal Treatment on the Surface Roughness of Scots Pine (Pinus sylvestris L.) Wood after Plane Milling
2016
·
Grzegorz Pinkowski
, Andrzej Krauss
, et al.
·
BioResources
·
15
Effect of chip thickness and tool wear on surface roughness and cutting power during up-milling wood of different density
2024
·
Grzegorz Pinkowski
, Magdalena Piernik
, et al.
·
BioResources
·
13
Risk analysis for operating active wheelchairs in non-urban settings
2017
·
Maciej Sydor
, Andrzej Krauss
, et al.
·
Annals of Agricultural and Environmental Medicine
·
10
PDF
Radial gradient of modulus of elasticity of wood and tracheid cell walls in dominant pine trees (Pinus sylvestris L.)
2008
·
Waldemar Moliński
, Andrzej Krauss
·
Folia Forestalia Polonica. Series B - Drzewnictwo
·
10
Color as an Indicator of Properties in Thermally Modified Scots Pine Sapwood
2022
·
Magdalena Piernik
, Magdalena Woźniak
, et al.
·
Materials
·
9
PDF
The Effect of Spiral Grain on Energy Requirement of Plane Milling of Scots Pine (Pinus sylvestris L.) Wood
2016
·
Grzegorz Pinkowski
, Andrzej Krauss
, et al.
·
BioResources
·
8
Impact of the cutting edge condition on the results of oak wood milling
2010
·
Grzegorz Pinkowski
, Wladyslaw W. Szymanski
, et al.
·
Annals of WULS Forestry and Wood Technology
·
6
Swelling pressure of spruce wood along the grains moistened in humid air or water
2004
·
Andrzej Krauss
·
Folia Forestalia Polonica. Series B - Drzewnictwo
·
6
On some aspects of a relation between density and mechanical properties of wood in longitudinal direction.
2009
·
Andrzej Krauss
·
5
Impact of the wear of the cutting edge on selected parameters of the surface geometric structure after wood milling.
2009
·
Grzegorz Pinkowski
, Wladyslaw W. Szymanski
, et al.
·
Annals of WULS Forestry and Wood Technology
·
5
Variation in the microfibril angle in tangential walls of pine wood tracheids (Pinus sylvestris L.).
2010
·
Andrzej Krauss
·
Wood Research
·
4
Gradient of tensile strength of wood along the grain in individual annual rings of dominant pine trees (Pinus sylvestris L.)
2008
·
Waldemar Moliński
, Andrzej Krauss
, et al.
·
Annals of WULS Forestry and Wood Technology
·
3
Swelling pressure of wood determined from hygro-mechanical creep measurements
2004
·
Andrzej Krauss
·
3
Medium-density fibreboard milling using selected technological parameters
2020
·
Grzegorz Pinkowski
, Waldemar Szymański
, et al.
·
BioResources
·
2
PDF
Duration of juvenile period in diameter growth of trees selected coniferous species
2015
·
M Czajka
, E. Fabisiak
, et al.
·
Annals of WULS Forestry and Wood Technology
·
2
Selected environmental aspects of the introduction into the polish market of exotic wood species on the example of caviuna (Machaerium scleroxylon Tul.).
2011
·
Andrzej Krauss
, Hanna Krauss
, et al.
·
PubMed
·
2
Gradient of density and tensile strength along the grains of spruce wood (Picea abies) within individual annual rings
2009
·
Waldemar Moliński
, Igor Čunderlík
, et al.
·
Annals of WULS Forestry and Wood Technology
·
2
Milling quality of sweet cherry (Prunus avium L.) wood on a CNC woodworking machine
2013
·
Grzegorz Pinkowski
, W Szxymanski
, et al.
·
Annals of WULS Forestry and Wood Technology
·
1
Impact of feed speed on the processing quality of seats on a multi-spindle drilling machine.
2010
·
Wladyslaw W. Szymanski
, Grzegorz Pinkowski
, et al.
·
Annals of WULS Forestry and Wood Technology
·
1
Show more works
View as search
Works count:
35
Citation count:
246
H-index:
10
I10-index:
10
Year
Topic
Type