Get started
Author

Seyed Hosseini

Observed names: Hosseini, Seyed, S. B. Hosseini, S. Hosseini, S.B. Hosseini, Seyed B. Hosseini, Seyed B. Hosseini, Seyed Behnam Hosseini
ORCID: 0000-0001-9288-3872
Observed ORCID: 0000-0001-9288-3872
OpenAlex ID: A5072616716
Formation mechanisms of white layers induced by hard turning of AISI 52100 steel
2015 · S.B. Hosseini, U. Klement, et al. · Acta Materialia · 131
A study of the influence of novel scan strategies on residual stress and microstructure of L-shaped LPBF IN718 samples
2022 · Prabhat Pant, Filomena Salvemini, et al. · Materials & Design · 111
PDF
Cutting temperatures during hard turning—Measurements and effects on white layer formation in AISI 52100
2014 · S.B. Hosseini, T. Beno, et al. · Journal of Materials Processing Technology · 103
Mapping of residual stresses in as-built Inconel 718 fabricated by laser powder bed fusion: A neutron diffraction study of build orientation influence on residual stresses
2020 · Prabhat Pant, Sebastian Proper, et al. · Additive manufacturing · 64
PDF
An In-Situ Scanning Electron Microscopy Study of the Bonding between MnS Inclusions and the Matrix during Tensile Deformation of Hot-Rolled Steels
2007 · S. B. Hosseini, C. Temmel, et al. · Metallurgical and Materials Transactions A · 62
Effect of post-processes on the microstructure and mechanical properties of laser powder bed fused IN718 superalloy
2021 · Jinghao Xu, Taoran Ma, et al. · Additive manufacturing · 61
Characteristics of a modified H13 hot-work tool steel fabricated by means of laser beam powder bed fusion
2021 · Miwen Yuan, Yu Cao, et al. · Materials Science and Engineering A · 46
Characterization of the Surface Integrity Induced by Hard Turning of Bainitic and Martensitic AISI 52100 Steel
2012 · S.B. Hosseini, K. Ryttberg, et al. · Procedia CIRP · 43
PDF
Atomic-scale investigation of carbon atom migration in surface induced white layers in high-carbon medium chromium (AISI 52100) bearing steel
2017 · S.B. Hosseini, M. Thuvander, et al. · Acta Materialia · 36
A descriptive phenomenological model for white layer formation in hard turning of AISI 52100 bearing steel
2021 · S.B. Hosseini, U. Klement · CIRP journal of manufacturing science and technology · 33
Dissolution of Iron-chromium Carbides during White Layer Formation Induced by Hard Turning of AISI 52100 Steel
2014 · S.B. Hosseini, R. Dahlgren, et al. · Procedia CIRP · 32
PDF
A Simplified Layer-by-Layer Model for Prediction of Residual Stress Distribution in Additively Manufactured Parts
2021 · Prabhat Pant, Sören Sjöström, et al. · Metals · 30
PDF
Evaluation of post-treatments of novel hot-work tool steel manufactured by laser powder bed fusion for aluminum die casting applications
2020 · A.M. Vilardell, S.B. Hosseini, et al. · Materials Science and Engineering A · 29
PDF
Effect of cutting parameters on the generated surface integrity of hard-turned martensitic AISI 52100 bearing steel
2022 · Sahith Kokkirala, Jonas Holmberg, et al. · Procedia CIRP · 21
PDF
Effect of post-processing on microstructure and mechanical properties of Alloy 718 fabricated using powder bed fusion additive manufacturing processes
2021 · Sareh Götelid, Taoran Ma, et al. · Rapid Prototyping Journal · 20
Large-Scale Robot-Based Polymer and Composite Additive Manufacturing: Failure Modes and Thermal Simulation
2022 · Saeed Akbari, Jan Johansson, et al. · Polymers · 14
PDF
Machining of additively manufactured alloy 718 in as-built and heat-treated condition: surface integrity and cutting tool wear
2023 · Jonas Holmberg, Johan Berglund, et al. · The International Journal of Advanced Manufacturing Technology · 13
PDF
Comparison of machining performance of stainless steel 316L produced by selective laser melting and electron beam melting
2022 · S.B. Hosseini, D. Mallipeddi, et al. · Procedia CIRP · 11
PDF
Microstructure Characterization of White Layer Formed by Hard Turning and Wire Electric Discharge Machining in High Carbon Steel (AISI 52100)
2011 · S. B. Hosseini, Uta Klement, et al. · Advanced materials research · 11
A Methodology for Temperature Correction When Using Two-Color Pyrometers - Compensation for Surface Topography and Material
2013 · S. B. Hosseini, T. Beno, et al. · Experimental Mechanics · 9
Determination of Stresses and Retained Austenite in Carbon Steels by X-rays - A Round Robin Study
2010 · S. B. Hosseini, B. Karlsson, et al. · Experimental Mechanics · 9
Understanding the development of mechanically and thermally induced white layers in AISI 52100 steel during hard turning: Process-microstructure-property relationship
2025 · Sahith Kokkirala, Uta Klement, et al. · Journal of Materials Research and Technology · 7
A Study in Additive Manufacturing of Windings for Traction Machines
2024 · Samuel Estenlund, Erik Adolfsson, et al. · International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM) · 7
White Layer Formation during Hard Turning of Through-Hardened Martensitic and Bainitic AISI 52100 Steel
2015 · Seyed Hosseini · Chalmers Research (Chalmers University of Technology) · 6
Round Robin Study on Residual Stresses Using X-Ray Diffraction for Shot-Peened Tool Steel Specimens
2018 · M. Palosaari, P. Andersson, et al. · Materials research proceedings · 5
PDF
Works count: 40
Citation count: 933
H-index: 15
I10-index: 19
Year
Topic
Type