Get started
Author

Muhamad F. Arif

Observed names: ARIF, Muhamad Fatikul, Arif, Muhamad Fatikul, M F Arif, M. F. Arif, M.F. Arif, Muhamad F Arif, Muhamad Fatikul Arif
Observed institutions: Centre National de la Recherche Scientifique, Khalifa University of Science and Technology, Arts et Métiers, Universiti Teknologi Petronas, Laboratoire d'Étude des Microstructures et de Mécanique des Matériaux, Sumatera Institute of Technology, Masdar Institute of Science and Technology, Université de Lorraine
ORCID: 0009-0004-6008-3159
Observed ORCID: 0009-0004-6008-3159
OpenAlex ID: A5073832703
Performance of biocompatible PEEK processed by fused deposition additive manufacturing
2018 · M.F. Arif, S. Kumar, et al. · Materials & Design · 303
Multifunctional performance of carbon nanotubes and graphene nanoplatelets reinforced PEEK composites enabled via FFF additive manufacturing
2019 · M.F. Arif, H. Alhashmi, et al. · Composites Part B Engineering · 252
PDF
In situ damage mechanisms investigation of PA66/GF30 composite: Effect of relative humidity
2013 · M.F. Arif, F. Meraghni, et al. · Composites Part B Engineering · 192
PDF
Multiscale fatigue damage characterization in short glass fiber reinforced polyamide-66
2014 · M.F. Arif, N. Saintier, et al. · Composites Part B Engineering · 188
PDF
Strength and Performance Enhancement of Bonded Joints by Spatial Tailoring of Adhesive Compliance via 3D Printing
2016 · S. Kumar, Brian L. Wardle, et al. · ACS Applied Materials & Interfaces · 90
Strong linear-piezoresistive-response of carbon nanostructures reinforced hyperelastic polymer nanocomposites
2018 · Muhamad F. Arif, S. Kumar, et al. · Composites Part A Applied Science and Manufacturing · 88
Tunable morphology and its influence on electrical, thermal and mechanical properties of carbon nanostructure-buckypaper
2016 · Muhamad F. Arif, S. Kumar, et al. · Materials & Design · 67
Stress Reduction of 3D Printed Compliance‐Tailored Multilayers
2017 · Shanmugam Kumar, Brian L. Wardle, et al. · Advanced Engineering Materials · 66
Enhanced Bonding via Additive Manufacturing‐Enabled Surface Tailoring of 3D Printed Continuous‐Fiber Composites
2018 · Edem Dugbenoo, Muhamad F. Arif, et al. · Advanced Engineering Materials · 65
Polymer Film Blend of Polyvinyl Alcohol, Trichloroethylene and Cresol Red for Gamma Radiation Dosimetry
2021 · Aris Doyan, Susilawati Susilawati, et al. · Polymers · 42
PDF
Effects of Chemical Treatment on Oil Palm Empty Fruit Bunch Reinforced High Density Polyethylene Composites
2009 · Muhamad F. Arif, Puteri S.M. Megat-Yusoff, et al. · Journal of Reinforced Plastics and Composites · 36
Zeolite-PAN/PVDF composite nanofiber membranes for highly efficient and selective removal of cationic dyes from wastewater
2024 · Muhamad F. Arif, Sephia Amanda Muhtar, et al. · Case Studies in Chemical and Environmental Engineering · 35
Enhanced UV sensing of ZnO films by Cu doping
2021 · E. Nurfani, W.A.P. Kesuma, et al. · Optical Materials · 29
A wet-filtration-zipping approach for fabricating highly electroconductive and auxetic graphene/carbon nanotube hybrid buckypaper
2018 · Shashikant P. Patole, Muhamad F. Arif, et al. · Scientific Reports · 29
PDF
Polyvinyl alcohol incorporated buckypaper composites for improved multifunctional performance
2018 · Shashikant P. Patole, Muhamad F. Arif, et al. · Composites Science and Technology · 26
Examining the influence of sintering temperatures on the efficiency of 3D-printed natural zeolite for methylene blue dye adsorption
2024 · Aditya Rianjanu, Tarmizi Taher, et al. · Results in Surfaces and Interfaces · 22
Complex mixture dye removal using natural zeolite modified polyacrylonitrile/polyvinylidene fluoride (Ze-PAN/PVDF) composite nanofiber membrane via vacuum filtration technique
2024 · Sephia Amanda Muhtar, Tia Amanda, et al. · Materials Today Communications · 20
Optical Properties and Conductivity of PVA–H3PO4 (Polyvinyl Alcohol–Phosphoric Acid) Film Blend Irradiated by γ-Rays
2021 · Susilawati Susilawati, Saiful Prayogi, et al. · Polymers · 20
PDF
Effect of chemical composition on hot cracking susceptibility (HCS) using various hot cracking criteria
2023 · E. Pujiyulianto, Suyitno, et al. · Engineering Failure Analysis · 19
Stability evaluation of quartz crystal microbalances coated with polyvinyl acetate nanofibrous mats as butanol vapor sensors
2020 · Aditya Rianjanu, Eka Nurfani, et al. · Materials Today Communications · 17
Glycerol‐Assisted Modification of 3D‐Printed Zeolite (3D‐Ze/Gy) for Enhanced Methylene Blue Dye Removal in Aqueous Solutions
2025 · Fauzi Ikhsan, Sephia Amanda Muhtar, et al. · Advanced Engineering Materials · 13
3D-printed Zeolite–MgAl layered double oxides (3D-Ze/LDO) as a reusable adsorbent with dual functionality for effective anionic and cationic pollutant removal from water
2025 · Tarmizi Taher, Sephia Amanda Muhtar, et al. · Applied Clay Science · 7
Fabrication of self-powered photodetector materials based on Ni-doped ZnO/p-Si heterojunctions
2025 · Eka Nurfani, Aldi Saputra, et al. · Next Materials · 6
Comparison Study of Mechanical Properties of Al-Si Alloy with and without Nanoreinforce Iron Oxide (Fe2O3)
2019 · Cepi Yazirin, Poppy Puspitasari, et al. · Journal of Mechanical Engineering Science and Technology (JMEST) · 5
PDF
Enhanced methylene blue adsorption capacity of 3D-printed zeolite/glycerol (3D-Ze/Gy) by sintering temperature optimalizations
2025 · Anisa Fitri, Bayu Prasetya, et al. · Next Materials · 4
Works count: 45
Citation count: 1,662
H-index: 19
I10-index: 21
Year
Topic
Type