Get started
Author

J.S. Kim

Observed names: J Kim, J. KIM, J. Kim, JONGSOON KIM, Jong Soon Kim, Jong-Soon Kim, JongSoon Kim, Jongsoon KIM, Jongsoon Kim, Ju Song Kim
Observed institutions: Mayo Clinic, Seoul National University, Henry Ford Health, Soonchunhyang University Hospital Seoul, Seoul National University Hospital, Kangbuk Samsung Hospital, Korea Basic Science Institute, Mayo Clinic in Florida, Mayo Clinic Comprehensive Cancer Center (Florida), Pusan National University, University of Cincinnati, Kim Il-sung University, Texas A&M University
ORCID: 0000-0002-4602-8290
Observed ORCID: 0000-0002-4602-8290
OpenAlex ID: A5074059811
A mechanistic model of cutting force in the micro end milling process
2007 · I.S. Kang, J.S. Kim, et al. · Journal of Materials Processing Technology · 130
Sol-gel synthesis and characterization of yttria stabilized zirconia membranes
1998 · J Kim · Journal of Membrane Science · 87
Evaluation of machinability by cutting environments in high-speed milling of difficult-to-cut materials
2001 · S.W. Kim, D.W. Lee, et al. · Journal of Materials Processing Technology · 72
Cutting performance of CrN and Cr-Si–N coated end-mill deposited by hybrid coating system for ultra-high speed micro machining
2008 · S.H. Shin, M.W. Kim, et al. · Surface and Coatings Technology · 53
E‐Beam Irradiation of Bagged, Ready‐to‐Eat Spinach Leaves ( Spinacea oleracea ): An Engineering Approach
2008 · C. Gomes, R.G. Moreira, et al. · Journal of Food Science · 47
3-D dose distributions for optimum radiation treatment planning of complex foods
2006 · J. Kim, R.G. Moreira, et al. · Journal of Food Engineering · 47
Electron-beam irradiation of fresh broccoli heads (Brassica oleracea L. italica)
2008 · C. Gomes, P. Da Silva, et al. · LWT · 43
Cutting performance of CrN-based coatings tool deposited by hybrid coating method for micro drilling applications
2008 · M.C. Kang, S.K. Je, et al. · Surface and Coatings Technology · 37
Development and validation of a methodology for dose calculation in electron beam irradiation of complex-shaped foods
2005 · Jongsoon Kim, Ramiro G. Rivadeneira, et al. · Journal of Food Engineering · 36
Modeling the growth rates of Escherichia coli spp. and Salmonella Typhimurium LT2 in baby spinach leaves under slow cooling
2012 · A.F. Puerta-Gomez, R.G. Moreira, et al. · Food Control · 34
Optimizing Electron Beam Irradiation of “tommy Atkins” Mangoes (mangifera Indica L.)
2007 · MARIA A. MORENO, M. ELENA CASTELL‐PEREZ, et al. · Journal of Food Process Engineering · 32
Factors Affecting Radiation D ‐Values ( D 10 ) of an Escherichia Coli Cocktail and Salmonella Typhimurium LT2 Inoculated in Fresh Produce
2012 · Rosana G. Moreira, Alex F. Puerta‐Gomez, et al. · Journal of Food Science · 29
Tumor necrosis factor‐α and interleukin‐1β expression pathway induced by Streptococcus mutans in macrophage cell line RAW 264.7
2012 · J.S. Kim, K.D. Kim, et al. · Molecular Oral Microbiology · 27
Ferroelectric properties of Nd-substituted bismuth titanate thin films processed at low temperature
2005 · J.S. Kim, S.S. Kim · Applied Physics A · 27
Properties and tool performance of ta-C films deposited by double-bend filtered cathodic vacuum arc for micro drilling applications
2010 · M.C. Kang, H.S. Tak, et al. · Diamond and Related Materials · 26
Tool condition and machined surface monitoring for micro-lens array fabrication in mechanical machining
2007 · I.S. Kang, J.S. Kim, et al. · Journal of Materials Processing Technology · 26
Simulation of pathogen inactivation in whole and fresh-cut cantaloupe (Cucumis melo) using electron beam treatment
2009 · Jongsoon Kim, Rosana Moreira, et al. · Journal of Food Engineering · 25
Validation of irradiation of broccoli with a 10MeV electron beam accelerator
2007 · J. Kim, R.G. Moreira, et al. · Journal of Food Engineering · 22
Acoustic emission characteristics for diagnosis of TBC damaged by high-temperature thermal fatigue
2007 · J.H. Park, J.S. Kim, et al. · Journal of Materials Processing Technology · 20
Mechanical properties and cutting performance of nanocomposite Cr–Si–N coated tool for green machining
2008 · C. Kim, M.C. Kang, et al. · Current Applied Physics · 19
Quantitative assessment of the effectiveness of intervention steps to reduce the risk of contamination of ready-to-eat baby spinach with Salmonella
2012 · A.F. Puerta-Gomez, J. Kim, et al. · Food Control · 18
Improving phytosanitary irradiation treatment of mangoes using Monte Carlo simulation
2014 · Jongsoon Kim, Rosana G. Moreira, et al. · Journal of Food Engineering · 17
Tool life of nanocomposite Ti–Al–Si–N coated end-mill by hybrid coating system in high speed machining of hardened AISI D2 steel
2008 · Y.K. Jeong, M.C. Kang, et al. · Current Applied Physics · 16
Monte Carlo‐based Food Irradiation Simulator
2006 · J. KIM, R.G. MOREIRA, et al. · Journal of Food Process Engineering · 15
Prediction of targeted Salmonella enterica serovar typhimurium inactivation in fresh cut cantaloupe (Cucumis melo L.) using electron beam irradiation
2010 · Ezekiel Chimbombi, Rosana G. Moreira, et al. · Journal of Food Engineering · 13
Works count: 53
Citation count: 1,025
H-index: 19
I10-index: 27
Year
Topic
Type