Author

E. G. Kolawole

Observed names: E.G. Kolawole, Kolawole E. G., Kolawole, E.G

Observed institutions: University of Nigeria, Ahmadu Bello University, University of Strathclyde, Bowen University

OpenAlex ID: A5075403237

Thermal and photo-degradation of unstabilized ABS

1984 · J.B. Adeniyi, E.G. Kolawole · European Polymer Journal · 56

The Effect of Epoxy Concentration and Fibre Loading on the Mechanical Properties of ABS/Epoxy-Coated Kenaf Fibre Composites

2015 · Hafsat R. Saliu, U. S. Ishiaku, et al. · Open Journal of Composite Materials · 20

PDF

Resolution of the Stick-slip Friction Traces of Fabrics

1995 · J. O. Ajayi, H. M. Elder, et al. · Journal of the Textile Institute · 17

Binding of Cu(II) to poly(methacrylic acid)

1977 · E. G. Kolawole, S. M. Mathieson · Journal of Polymer Science Polymer Chemistry Edition · 16

The effect of 3,5-ditert.butyl-4-hydroxybenzylthioglycollate and tinuvin P on the thermal, photo and natural degradation of ABS

1982 · E.G. Kolawole, J.B. Adeniyi · European Polymer Journal · 15

Thermogravimetric Studies of the Pyrolytic Behaviour in Air of Selected Tropical Timbers

1996 · Musa Momoh, A. N. Eboatu, et al. · Fire and Materials · 14

Processibility of Nigerian kapok fibre

2003 · Benjamin Dauda, E. G. Kolawole · Indian Journal of Fibre & Textile Research · 13

Interaction of divalent ions of copper, magnesium and zinc with isotactic polymethacrylic acid

1980 · E.G. Kolawole, M.A. Bello · European Polymer Journal · 13

Binding of zinc ions to polymethacrylate anions at varying charge densities

1981 · E. G. Kolawole, J. Y. Olayemi · Macromolecules · 11

Flammability of tropical woods—I. Investigation of the burning parameters

1996 · Musa Momoh, A.R. Horrocks, et al. · Polymer Degradation and Stability · 10

Stabilization of ABS with bound synergistic stabilizers added as masterbatches

1981 · E. G. Kolawole, G. Scott · Journal of Applied Polymer Science · 10

Environmental degradation of some polymer blends. Blends of polystyrene with acrylonitrile butadiene styrene, poly(vinyl chloride), and polybutadiene and blends of polybutadiene with poly(vinyl chloride)

1982 · E. G. Kolawole, M. O. Agboola · Journal of Applied Polymer Science · 9

Natural weathering, photo and thermal degradation of the two-phase system poly(vinyl chloride) and poly(isobutylene)

1985 · E.G. Kolawole, P.O. Olugbemi · European Polymer Journal · 8

Thermal and photooxidation of polyolefins in the presence of 3,5‐ditertiarybutyl 4‐hydroxybenzyl thioglycollate, zinc diethyldithio carbamate, and irganox 1076

1982 · E. G. Kolawole · Journal of Applied Polymer Science · 6

Dimerization in polymethacrylic acid in solution

1979 · E. G. Kolawole, S. M. Mathieson · Journal of Polymer Science Polymer Letters Edition · 5

Effects of Sled Velocity on Fabric Friction.

1998 · J.O. Ajayi, H.M. Elder, et al. · Sen i Kikai Gakkaishi (Journal of the Textile Machinery Society of Japan) · 4

PDF

Natural weathering, photo- and thermal oxidation of the two-phase system polyisobutylene and poly(methyl methacrylate)

1984 · E.G. Kolawole · European Polymer Journal · 4

Environmental and thermal oxidation of poly(vinyl chloride) and impact‐modified poly(vinyl chloride). I

1980 · E. G. Kolawole, G. E. Mbamali, et al. · Journal of Applied Polymer Science · 3

PDF

Some aspects of stabilization and degradation of nigerian natural rubber (II): The environmental degradation of DBHBT‐modified unprocessed, unvulcanized nigerian natural rubber

1992 · G. C. Ebi, E. G. Kolawole · Journal of Applied Polymer Science · 2

Dimerization of nucleic acid in solution

1981 · J. Y. Olayemi, E. G. Kolawole · Journal of Polymer Science Polymer Letters Edition · 2

Hydrolytic Studies of Thermoplastic ABS/ Epoxy Coated Kenaf Fibres Composites

2021 · Hafsat Ronke Saliu, S.S Adefila, et al. · SLU Journal of Science and Technology

Thermal and mechanical properties of high-density polyethylene (HDPE)/leather composite

2016 · Musa E. T., Hamza A., et al. · Nigerian Journal of Materials Science and Engineering

Production of uniformly disperse carbon nanotube/high density polyethylene nanocomposite using novel nanofeeder injection moulding machine

2015 · GADIMOH S., IBRAHIM H. D, et al. · Nigerian Journal of Materials Science and Engineering

Effect of High Temperature Curative and Moulding Temperatures on Tensile and Thermal Properties of Engineering Thermoplastic Abs/Modified Kenaf Fibre (Kf) Composites

2015 · Iosr Journals, Saliu, Hafsat R, et al. · Figshare

Effect of Fired Clay on the Physical and Mechanical Properties of Un- plasticized Poly (Vinyl Chloride) Composite

2014 · E. G. Kolawole, C. E. Gimba

Works count: 30

Citation count: 238

H-index: 10

I10-index: 11