Author

Olga Zharkevich

Observed names: O M Zharkevich, O Zharkevich, O. M. Zharkevich, O. Zharkevich, O.M. Zharkevich, Olga Mikhailovna Zharkevich, Olga ZHARKEVICH, Zharkevich Olga, Zharkevich, Olga, Жаркевич, О.М., Жаркевич, Ольга, О М Жаркевич, О. М. Zharkevich, О. М. Жаркевич, О.М. Жаркевич

Institution: Abylkas Saginov Karaganda Technical University

Observed institutions: Vilnius Gediminas Technical University, Technical University of Sofia, Toraighyrov University, Abylkas Saginov Karaganda Technical University, Navoi State University of Mining and Technologies

ORCID: 0000-0002-4249-4710

Observed ORCID: 0000-0002-4249-4710

OpenAlex ID: A5075495885

The development of the computer-aided design system for production processes of component part machining for single-piece production and repair conditions

2019 · Gulnara Zhetessova, Vasiliy Yurchenko, et al. · Istrazivanja i projektovanja za privredu · 43

Experimental Studies of the Application of the Methodology of Kazakhstan’s CAD of Technological Processes for Manufacturing Parts of Mining Machines and the Development of Recommendations

2018 · G. S. Zhetessova, V. V. Yurchenko, et al. · Russian Internet Journal of Industrial Engineering · 33

Environmental management in automated systems for engineering production

2020 · G S Zhetessova, V V Yurchenko, et al. · IOP Conference Series Materials Science and Engineering · 32

Effect of Laser Processing Parameters on Microstructure, Hardness and Tribology of NiCrCoFeCBSi/WC Coatings

2021 · Jelena Škamat, Olegas Černašėjus, et al. · Materials · 26

Parametric Optimization of a New Gear Pump Casing Based on Weight Using a Finite Element Method

2023 · Olga Zharkevich, Tatyana Nikonova, et al. · Applied Sciences · 24

Studying the process of tooling cylindrical gears

2020 · Karibek Sherov, Bakhtiyor Mardonov, et al. · Istrazivanja i projektovanja za privredu · 19

A Comparative Analysis of the Dynamic Strength Properties of the Long Guides of Intelligent Machines for a New Method of the Thermal Spraying of Polymer Concrete

2022 · Gulnara Zhetessova, Tatyana Nikonova, et al. · Applied Sciences · 16

Radial-piston pump for drive of test machines

2018 · A I Nizhegorodov, A N Gavrilin, et al. · IOP Conference Series Materials Science and Engineering · 16

Developing a Measuring System for Monitoring the Thickness of the 6 m Wide HDPE/LDPE Polymer Geomembrane with Its Continuous Flow Using Automation Equipment

2021 · Tatyana Nikonova, Olga Zharkevich, et al. · Applied Sciences · 15

Stand for dynamic tests of technical products in the mode of amplitude-frequency modulation with hydrostatic vibratory drive

2016 · Anatolij Nizhegorodov, Alexey Gavrilin, et al. · Journal of Vibroengineering · 14

Improving the Design of a Multi-Gear Pump Switchgear Using CFD Analysis

2024 · Olga Zharkevich, Tatyana Nikonova, et al. · Applied Sciences · 12

Study of Deformation and Strength Characteristics of Highly Filled Sand–Polymer Composites Based on Regenerated Thermoplastics

2025 · Vassiliy Yurchenko, Vitali Haiduk, et al. · Journal of Composites Science · 7

Evaluation of the Structural Strength of a Prefabricated Milling Cutter with Replaceable inserts During Machining

2023 · O Nurzhanova, O Zharkevich, et al. · Material and Mechanical Engineering Technology · 7

Simulation of the distribution of temperature, stresses and deformations during splined shafts hardfacing

2023 · Oxana Nurzhanova, Olga Zharkevich, et al. · Istrazivanja i projektovanja za privredu · 7

Features of chip formation during thermal friction milling

2021 · M.M. Mussayev, K.T. Sherov, et al. · Material and Mechanical Engineering Technology · 7

Constructive and processing methods of reducing vibration level of the metalworking machinery elements

2015 · Alexey Gavrilin, Boris Moyzes, et al. · Journal of Vibroengineering · 7

Determination of Optimal Hardfacing Modes for Recovering Electric Motor Shafts

2023 · Zharkevich, Olga, Nurzhanova, Oxana, et al. · Tehnicki vjesnik - Technical Gazette · 6

The influence of kinematic viscosity of oils on the energy consumption of a gear pump used for pumping oil in machines and vehicles

2025 · Łukasz Warguła, Łukasz Gierz, et al. · PLoS ONE · 5

Model of Optimization of Process Parameters for Machining of Separate Design Elements of the Product

2025 · Gulnara Zhetessova, Irina Khrustaleva, et al. · Applied Sciences · 5

The study of the impact of oil type and throttling pressure on the vibrations of a gear pump

2025 · Bartosz Wieczorek, Łukasz Warguła, et al. · Advances in Science and Technology – Research Journal · 5

Implementation of Simulation Modeling of Single and High-Volume Machine-Building Productions

2024 · Nadezhda Savelyeva, Tatyana Nikonova, et al. · Designs · 5

Experimental studies of stabilization of boring cutter form – building top oscillation

2012 · М. Р. Сихимбаев, К.Т. Шеров, et al. · Journal of Vibroengineering · 5

CFD-FEM Analysis for Functionality Prediction of Multi-Gear Pumps

2024 · Olga Zharkevich, Olga Reshetnikova, et al. · Designs · 4

Additive Optimization Method for Choosing CNC Machines for Technological Preparation of Machine-Building Production

2024 · Gulnara Zhetessova, Olga Zharkevich, et al. · Material and Mechanical Engineering Technology · 4

Building mathematical model for gas-thermal process of coating evaporation

2016 · Gulnara Zhetessova, Olga Zharkevich, et al. · Hrčak Portal of scientific journals of Croatia (University Computing Centre) · 4

Works count: 85

Citation count: 358

H-index: 11

I10-index: 11