Author

Sergey Viktorovich Alekseyenko

Observed names: Alekseenko Serhii, Alekseyenko, Sergey, S Alekseyenko, S. Aleksieienko, S. V Aleksieienko, S. V. ALEKSEYENKO, S. V. Alekseyenko, S. V. Aleksieienko, S.V. Alekseyenko, S.V. Aleksieienko, Sergey Alekseyenko, Serhii Alekseyenko, Serhii Aleksieienko, Алексєєнко С. В., С.В. Алексєєнко, Сергій Алексєєнко

Institution: Dnipro University of Technology

Observed institutions: Dnipro University of Technology, Oles Honchar Dnipro National University

ORCID: 0000-0003-0320-989X

Observed ORCID: 0000-0003-0320-989X

OpenAlex ID: A5075960540

Interaction of Supercooled Large Droplets with Aerodynamic Profile

2015 · Sergey Alekseyenko, Michael Sinapius, et al. · SAE technical papers on CD-ROM/SAE technical paper series · 20

Numerical Simulation of Icing of a Cylinder and an Airfoil: Model Review and Computational Results

2013 · Sergey Viktorovich Alekseyenko, Oleksander Anatolyevich Prykhodko · TsAGI science journal · 15

Numerical Study of Aerodynamic Characteristics of a Pointed Plate of Variable Elongation in Subsonic and Supersonic Gas Flow

2022 · Serhii Alekseyenko, Andrii Dreus, et al. · Journal of Advanced Research in Fluid Mechanics and Thermal Sciences · 12

Determination of features of formation of energy supply systems with the use of renewable energy sources in the transition period

2021 · Liliya Nakashydze, Volodimir Gabrinets, et al. · Eastern-European Journal of Enterprise Technologies · 9

Numerical Investigation of the Influence of Horn Ice Formation on Airfoils Aerodynamic Performances

2019 · Aleksandr Anatolyevich Prykhodko, Sergey Viktorovich Alekseyenko, et al. · International Journal of Fluid Mechanics Research · 7

Numerical simulation of the process of airfoil icing in the presence of large supercooled water drops

2014 · O. A. Prykhodko, S. V. Alekseyenko · Technical Physics Letters · 7

Prospects for the creation of small-sized high-speed unmanned aerial vehicles based on WIG-craft

2025 · Andrii Dreus, Sergey Alekseyenko, et al. · EUREKA Physics and Engineering · 4

Technology of Utilization of Polypropylene Waste and Wastewater Sediments by Production of Building Blocks

2022 · Olena Levytska, Inna Trus, et al. · Ecological Engineering & Environmental Technology · 4

Numerical Simulation of Subsonic Flow Over a Profile

2018 · S. V. Alekseyenko · Journal of Rocket-Space Technology · 4

The development of a three-dimensional model of the ice growth process on aerodynamic surfaces

2019 · Sergey Alekseyenko, Оleg Yushkevich · Technology audit and production reserves · 2

Methodology of the acoustic experiment for studying the aerodynamic noise of wind turbine blade segments

2025 · S. V Aleksieienko, A. Yu Dreus, et al. · Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu · 1

Justification of Digital Algorithmic Model Controlling the Radial Runout of Gear Wheels

2025 · Serhii Alekseyenko, Vladyslav Ruban, et al. · Lecture notes in mechanical engineering · 1

Assessing the possibility of using a variable-length launch vehicle with a polymer body for orbiting payload

2024 · Aleksandr Golubek, Serhii Aleksieienko, et al. · Eastern-European Journal of Enterprise Technologies · 1

Application of numerical simulation methods for reduction of aircrafts ice protection systems energy consumption

2018 · Sergey Alekseyenko, Оleg Yushkevich · Technology audit and production reserves · 1

Numerical Simulation of the Ising Surfaces of the Cylinder and Profile

2013 · Sergey Alekseyenko · PAMM · 1

Expert Substantiation of Resource-efficient Technology for Separate Disposal of Low- and High-organic Sewage Sludge

2026 · O.H. Levytska, I.M. Trus, et al. · Energy Technologies & Resource Saving

Use of 3d Printing Technologies in the Design of Soil Tillage Equipment

2026 · Vitalii Derbaba, Viktoriia Kozechko, et al. · Vestnik Nacionalʹnogo tehničeskogo universiteta "HPI". Tehnologii v mašinostroenii/Vìsnik Nacìonalʹnogo tehnìčnogo unìversitetu HPÌ. Serìâ: Tehnologìï v mašinobuduvannì

Effectiveness of trailing edge serrations in wind turbine noise mitigation: experimental validation

2026 · Serhii Aleksieienko, Andrii Dreus, et al. · IOP Conference Series Earth and Environmental Science

Numerical study of the influence of cone-cylindrical body geometry on aerodynamic processes in transonic flow

2026 · Andrii Dreus, Serhii Aleksieienko, et al. · Aircraft Engineering and Aerospace Technology

Technology for comprehensive machining parts manufactured using additive manufacturing technologies

2026 · Алексєєнко С. В., Дербаба В. А., et al. · Institutional Repository National Mining University of Ukraine (National Mining University of Ukraine)

Improvement of post-mechanical processing technology for parts created by additive technologies

2025 · V Kozechko, M Kuvaiev, et al. · Collection of Research Papers of the National Mining University

Comprehensive Assessment of the Impact of Icing on Small Unmanned Aerial Vehicles

2025 · S. V. Aleksieienko, Z. V. Sazanishvili · System design and analysis of aerospace technique characteristics

Експериментальне Дослідження Аеродинамічних Характеристик Моделей Малих Літальних Апаратів Схеми «літаюче Крило»

2025 · Сергій Алексєєнко, Зоя Сазанішвілі, et al. · Journal of Rocket-Space Technology

Combined machining of the part on a machine with software control and optimization of mode parameters

2025 · V Derbaba, S Alekseyenko, et al. · Collection of Research Papers of the National Mining University

On the Issue of an Anomaly Detection Algorithm for Identifying Potentially Generated Entangled Photons

2025 · Serhii Aleksieienko, Dmytro Babets, et al. · International Conference on Control, Decision and Information Technologies (CoDIT)

Works count: 42

Citation count: 89

H-index: 6

I10-index: 3