Get started
Author

Güralp Özkoç

Observed names: G. Özkoç, Guralp OZKOC, Guralp Ozkoc, Güralp Ozkoc, Güralp ÖZKOÇ, Ozkoc, Guralp, ÖZKOÇ, GÜRALP, Özkoç, Güralp
Observed institutions: Sabancı Üniversitesi, Netherlands Organisation for Applied Scientific Research, Middle East Technical University, Istinye University, Brightlands Materials Center, Kocaeli Üniversitesi
ORCID: 0000-0002-3194-5256
Observed ORCID: 0000-0002-3194-5256
OpenAlex ID: A5076801067
Properties of thermally conductive micro and nano size boron nitride reinforced silicon rubber composites
2009 · Sebnem Kemaloglu, Guralp Ozkoc, et al. · Thermochimica Acta · 297
Morphology, biodegradability, mechanical, and thermal properties of nanocomposite films based on PLA and plasticized PLA
2009 · Guralp Ozkoc, Sebnem Kemaloglu · Journal of Applied Polymer Science · 188
Compatibilization of PLA/PBAT blends by using Epoxy‐POSS
2018 · Nilay T. Kilic, Buse N. Can, et al. · Journal of Applied Polymer Science · 116
Effects of Alkali Treatment on the Properties of Short Flax Fiber–Poly(Lactic Acid) Eco-Composites
2010 · Merlin Aydın, Hale Tozlu, et al. · Journal of Polymers and the Environment · 114
Physical, mechanical and neutron shielding properties of h-BN/Gd 2 O 3 /HDPE ternary nanocomposites
2017 · Ş. Gözde İrim, Abdulmounem Alchekh Wis, et al. · Radiation Physics and Chemistry · 95
Effects of polyamide 6 incorporation to the short glass fiber reinforced ABS composites: an interfacial approach
2004 · Guralp Ozkoc, Goknur Bayram, et al. · Polymer · 86
Effects of POSS particles on the mechanical, thermal, and morphological properties of PLA and Plasticised PLA
2011 · Dilek Turan, Humeyra Sirin, et al. · Journal of Applied Polymer Science · 83
Reactive compatibilization of PLA/TPU blends with a diisocyanate
2013 · Sebnem Kemaloglu Dogan, Efren Andablo Reyes, et al. · Journal of Applied Polymer Science · 81
Effects of Diisocyanate and Polymeric Epoxidized Chain Extenders on the Properties of Recycled Poly(Lactic Acid)
2016 · Basak Tuna, Guralp Ozkoc · Journal of Polymers and the Environment · 77
Plasticized and unplasticized PLA/organoclay nanocomposites: Short‐ and long‐term thermal properties, morphology, and nonisothermal crystallization behavior
2011 · Serap Gumus, Guralp Ozkoc, et al. · Journal of Applied Polymer Science · 77
The effects of POSS particles on the flame retardancy of intumescent polypropylene composites and the structure-property relationship
2018 · Gizem Turgut, Mehmet Dogan, et al. · Polymer Degradation and Stability · 74
Thermal, mechanical and physical properties of chain extended recycled polyamide 6 via reactive extrusion: Effect of chain extender types
2019 · Selin Celebi Ozmen, Guralp Ozkoc, et al. · Polymer Degradation and Stability · 66
Short glass fiber reinforced ABS and ABS/PA6 composites: Processing and characterization
2005 · Guralp Ozkoc, Goknur Bayram, et al. · Polymer Composites · 65
Effects of reactive and nonreactive POSS types on the mechanical, thermal, and morphological properties of plasticized poly(lactic acid)
2013 · Mehmet Kodal, Humeyra Sirin, et al. · Polymer Engineering and Science · 63
A comprehensive review of the recent developments in thermoplastics and rubber blends‐based composites and nanocomposites
2023 · Gizem Urtekin, Muhammad Saeed Ullah, et al. · Polymer Composites · 62
PDF
The mechanical, thermal and morphological properties of γ-irradiated PLA/TAIC and PLA/OvPOSS
2018 · Mehmet Kodal, Abdulmounem Alchekh Wis, et al. · Radiation Physics and Chemistry · 59
Fracture toughness analysis of O-POSS/PLA composites assessed by essential work of fracture method
2013 · Sinan Yilmaz, Mehmet Kodal, et al. · Composites Part B Engineering · 59
Polyimide nanocomposites in ternary structure: “A novel simultaneous neutron and gamma‐ray shielding material”
2020 · Oktay Baykara, Şerife G. İrim, et al. · Polymers for Advanced Technologies · 54
Overmolded hybrid composites of polyamide-6 on continuous carbon and glass fiber/epoxy composites: ‘An assessment of the interface’
2020 · Nursel Karakaya, Melih Papila, et al. · Composites Part A Applied Science and Manufacturing · 54
Effects of octamaleamic acid-POSS used as the adhesion enhancer on the properties of silicone rubber/silica nanocomposites
2016 · Humeyra Sirin, Mehmet Kodal, et al. · Composites Part B Engineering · 52
Sustainable approach to produce 3D ‐printed continuous carbon fiber composites: “A comparison of virgin and recycled PETG”
2021 · Guy J. P. Bex, Bastiaan L. J. Ingenhut, et al. · Polymer Composites · 50
Non-isothermal crystallization kinetics of Poly(Butylene succinate) (PBS) nanocomposites with different modified carbon nanotubes
2018 · Tugay Yarici, Mehmet Kodal, et al. · Polymer · 49
Investigation of erosive wear behavior and physical properties of SGF and/or calcite reinforced ABS/PA6 composites
2012 · N. Gamze Karsli, Taner Yilmaz, et al. · Composites Part B Engineering · 47
Thermally conductive boron nitride/SEBS/EVA ternary composites: “Processing and characterization”
2009 · Sebnem Kemaloglu, Guralp Ozkoc, et al. · Polymer Composites · 47
Mechanical and thermal properties of volcanic particle filled PLA/PBAT composites
2017 · Onur Çoban, Mustafa Özgür Bora, et al. · Polymer Composites · 46
Works count: 352
Citation count: 3,346
H-index: 35
I10-index: 72
Year
Topic
Type