Author

Mostafa Amirjan

Observed name: M. Amirjan

Observed institutions: Niroo Research Institute, Malek Ashtar University of Technology, K. N. Toosi University of Technology

ORCID: 0000-0001-8576-0145

Observed ORCID: 0000-0001-8576-0145

OpenAlex ID: A5076895919

Effect of scanning strategy and speed on the microstructure and mechanical properties of selective laser melted IN718 nickel-based superalloy

2019 · Mostafa Amirjan, Hassan Sakiani · The International Journal of Advanced Manufacturing Technology · 70

Evaluation of microstructure and contiguity of W/Cu composites prepared by coated tungsten powders

2008 · M. Amirjan, K. Zangeneh-Madar, et al. · International Journal of Refractory Metals and Hard Materials · 64

Improvement of physical properties of Cu-infiltrated W compacts via electroless nickel plating of primary tungsten powder

2009 · K. Zangeneh-Madar, M. Amirjan, et al. · Surface and Coatings Technology · 53

Artificial Neural Network prediction of Cu–Al2O3 composite properties prepared by powder metallurgy method

2013 · Mostafa Amirjan, Hamid Khorsand, et al. · Journal of Materials Research and Technology · 50

PDF

Mutual dependency of mechanical properties and contiguity in W–Cu composites

2010 · M. Amirjan, N. Parvin, et al. · Materials Science and Engineering A · 47

Microstructure, wear and friction behavior of nanocomposite materials with natural ingredients

2018 · Mostafa Amirjan · Tribology International · 46

Investigation of microstructure and corrosion behavior of IN718 superalloy fabricated by selective laser melting

2021 · Mostafa Amirjan, Mansoor Bozorg, et al. · Materials Chemistry and Physics · 33

The effect of processing parameters and heat-treatment on the microstructure and mechanical properties of PM CoCrFeMnNiTi0.1 high-entropy alloy

2020 · Parisa Akhlaghi, Mostafa Amirjan, et al. · Materials Chemistry and Physics · 22

Effect of heat treatment on the microstructure and mechanical properties of a dual phase Al14Co41Cr15Fe10Ni20 high entropy alloy

2023 · Ali Shafiei, Saeed Khani Moghanaki, et al. · Journal of Materials Research and Technology · 21

Properties and corrosion behavior of Al based nanocomposite foams produced by the sintering-dissolution process

2018 · Mostafa Amirjan, Mansour Bozorg · International Journal of Minerals Metallurgy and Materials · 17

On the failure behavior of fifth stage gas turbine blade

2020 · Aliakbar Fallah Sheykhlari, Saeed Khani Moghanaki, et al. · Engineering Failure Analysis · 15

Processing and properties of Al-based powder suspension/slurry: A comparison study of aqueous binder systems, stability and film uniformity

2014 · Mostafa Amirjan, Hamid Khorsand · Powder Technology · 14

Direct metal deposition of IN625 on IN738LC superalloy: microstructure and crack analysis

2021 · Mostafa Amirjan, Masoumeh Khodabandeh · Applied Physics A · 9

Preparation of tungsten base composite powder by electroless nickel plating

2008 · M. Amirjan, K. Zangeneh-Madar, et al. · Powder Metallurgy · 8

Correlation Between Processing Parameters in Direct Metal Deposition of IN625 Nickel-Base Superalloy

2021 · Mostafa Amirjan, Masoumeh Khodabandeh · Journal of Materials Engineering and Performance · 7

Elemental diffusion influenced by process parameters in LPBF of IN625 on IN738 substrate: A focused investigation of Ti behavior and its role in defect formation (cracks and pores)

2025 · Amirhossein Riazi, Seyed Hossein Razavi, et al. · Journal of Materials Research and Technology · 6

Fluidized bed coating efficiency and morphology of coatings for producing Al-based nanocomposite hollow spheres

2014 · Mostafa Amirjan, Hamid Khorsand, et al. · International Journal of Minerals Metallurgy and Materials · 6

Preparation and characterisation of nickel-based brazing powder: cobalt and chromium addition effects

2022 · E. Hosseini, M. Amirjan, et al. · Powder Metallurgy · 5

Fabrication and properties of Cu-Al2O3functionally graded nanocomposites prepared by spark plasma sintering: the effect of copper particle size and reinforcement content

2019 · Mostafa Amirjan, Mansoor Bozorg · Materials Research Express · 5

A new approach to the reasons for dependency of defects formation to the process parameters in laser powder bed fusion of IN625 on the IN738LC substrate

2024 · Amirhossein Riazi, Seyed Hossein Razavi, et al. · Journal of Advanced Joining Processes · 4

Development of Ni-base oxide dispersion strengthened alloys using yttria-stabilised zirconia nanoparticles: powder preparation and spark plasma sintering processing

2021 · Mostafa Amirjan · Powder Metallurgy · 4

Evaluation of yttria-stabilized zirconia reinforced Inconel 625 superalloy composite powders appropriate for SLM process

2025 · M. Mirzaei, S.G. Shabestari, et al. · Journal of Materials Research and Technology · 3

Influence of process parameters on melt pool morphology and elemental diffusion in LPBF of IN625 on IN738 substrate

2025 · Amirhossein Riazi, Seyed Hossein Razavi, et al. · Results in Surfaces and Interfaces · 2

Preparation and Characterization of Nickel-Based Brazing Powder and Paste for Wide Gap Repair on IN738 Alloy

2022 · Ali Zandifar, Mostafa Amirjan, et al. · Journal of Materials Engineering and Performance · 2

Investigation of copper corrosion behavior subjected to power plants’ atmosphere

2025 · Mahdi Shiri, Mostafa Amirjan, et al. · Materials Today Communications · 1

Works count: 35

Citation count: 517

H-index: 12

I10-index: 12