Get started
Author

Felix Rickhey

Observed name: Rickhey Felix
ORCID: 0000-0003-1722-7343
Observed ORCID: 0000-0003-1722-7343
OpenAlex ID: A5077566829
Nanoindentation of zirconium based bulk metallic glass and its nanomechanical properties
2019 · Karuppasamy Pandian Marimuthu, Kwangmin Lee, et al. · Journal of Materials Research and Technology · 55
PDF
A contact size-independent approach to the estimation of biaxial residual stresses by Knoop indentation
2015 · Felix Rickhey, Jin Haeng Lee, et al. · Materials & Design · 40
Evaluation of indentation fracture toughness for brittle materials based on the cohesive zone finite element method
2014 · Hong Chul Hyun, Felix Rickhey, et al. · Engineering Fracture Mechanics · 38
Spherical indentation for brittle fracture toughness evaluation by considering kinked-cone-crack
2016 · Karuppasamy Pandian Marimuthu, Felix Rickhey, et al. · Journal of the European Ceramic Society · 35
Characteristics of indentation cracking using cohesive zone finite element techniques for pyramidal indenters
2014 · Hong Chul Hyun, Felix Rickhey, et al. · International Journal of Solids and Structures · 30
Stress Triaxiality in Anisotropic Metal Sheets—Definition and Experimental Acquisition for Numerical Damage Prediction
2022 · Felix Rickhey, Seokmoo Hong · Materials · 28
PDF
Indentation cracking of monocrystalline silicon considering fracture anisotropy
2019 · Felix Rickhey, Karuppasamy Pandian Marimuthu, et al. · Theoretical and Applied Fracture Mechanics · 21
A dual triangular pyramidal indentation technique for material property evaluation
2015 · Minsoo Kim, Jin Haeng Lee, et al. · Journal of materials research/Pratt's guide to venture capital sources · 19
XFEM investigation on Knoop indentation cracking: Fracture toughness and aspect-ratio of radial-median cracks
2016 · Felix Rickhey, Jin Haeng Lee, et al. · Materials & Design · 18
An efficient way of extracting creep properties from short-time spherical indentation tests
2015 · Felix Rickhey, Jin Haeng Lee, et al. · Journal of materials research/Pratt's guide to venture capital sources · 16
Evaluation of the fracture toughness of brittle hardening materials by Vickers indentation
2015 · Felix Rickhey, Karuppasamy Pandian Marimuthu, et al. · Engineering Fracture Mechanics · 16
Investigation on Indentation Cracking-Based Approaches for Residual Stress Evaluation
2017 · Felix Rickhey, Karuppasamy Marimuthu, et al. · Materials · 15
PDF
Analytical determination of forming limit curve for zirlo and its experimental validation
2016 · Minsoo Kim, Felix Rickhey, et al. · Journal of Manufacturing Processes · 15
Evaluation of combined hardening coefficients of zircaloy-4 sheets by simple shear test
2014 · Felix Rickhey, Minsoo Kim, et al. · Materials & Design (1980-2015) · 15
Correction of indentation load–depth curve based on elastic deformation of sharp indenter
2013 · Minsoo Kim, Sungsik Bang, et al. · Mechanics of Materials · 14
Evolution of instantaneous r-values in the post-critical region and its implications on the deformation behavior
2021 · Felix Rickhey, Seokmoo Hong · International Journal of Mechanical Sciences · 9
Damage prediction in thermoplastics under impact loading using a strain rate-dependent GISSMO
2023 · Felix Rickhey, Taeyun Park, et al. · Engineering Failure Analysis · 8
Determination of crack-free mechanical properties of brittle materials via single nanoindentation
2020 · Kwangmin Lee, Karuppasamy Pandian Marimuthu, et al. · International Journal of Solids and Structures · 8
Numerical approach to the evaluation of forming limit curves for zircaloy-4 sheet
2015 · Minsoo Kim, Felix Rickhey, et al. · Journal of materials research/Pratt's guide to venture capital sources · 5
Enhancement of the analytical solution for double torsion test using extended finite element techniques
2018 · Karuppasamy Pandian Marimuthu, Kwangmin Lee, et al. · Ceramics International · 4
XFEM simulation of radial-median crack formation in brittle medium underneath sharp indenters
2014 · Felix Rickhey, Minsoo Kim, et al. · 대한기계학회 춘추학술대회 · 4
Validation of axial and transverse force–displacement responses and principal strain rate ratios in the critical zone as a precursor to anisotropic damage prediction in metal sheets
2022 · Felix Rickhey, Seokmoo Hong · International Journal of Material Forming · 2
Spherical indentation cracking in brittle materials: An XFEM study
2016 · Karuppasamy Pandian Marimuthu, Felix Rickhey, et al. · International Conference on Mechanical and Aerospace Engineering · 2
Gauge length and frame rate dependence of the onset of instability and the fracture limit of DP 980 sheets
2020 · Felix Rickhey, Minsoo Kim, et al. · Engineering Research Express · 1
PDF
The Importance of the Choice of the Yield Criterion in Triaxiality Evaluation for Highly Anisotropic Zirlo Sheets
2022 · Felix Rickhey, Seokmoo Hong · The minerals, metals & materials series
Works count: 29
Citation count: 418
H-index: 14
I10-index: 15
Year
Topic
Type