Get started
Author

Marcin Słoma

Observed names: M. Sloma, M. Słoma, Marcin Sloma, Sloma Marcin, Sloma, Marcin, Słoma, Marcin
ORCID: 0000-0002-8777-6041
Observed ORCID: 0000-0002-8777-6041
OpenAlex ID: A5079187053
Flexible Temperature Sensors on Fibers
2010 · Maciej Sibinski, Malgorzata Jakubowska, et al. · Sensors · 187
PDF
Carbon Nanotube-Based Composite Filaments for 3D Printing of Structural and Conductive Elements
2021 · Bartłomiej Podsiadły, Piotr Matuszewski, et al. · Applied Sciences · 71
PDF
3D printed electronics with nanomaterials
2023 · Marcin Słoma · Nanoscale · 70
PDF
Electric Properties of Graphene-Based Conductive Layers from DC Up To Terahertz Range
2016 · Pawel Kopyt, Bartlomiej Salski, et al. · IEEE Transactions on Terahertz Science and Technology · 70
Efficient Inkjet Printing of Graphene-Based Elements: Influence of Dispersing Agent on Ink Viscosity
2018 · Lucja Dybowska-Sarapuk, Konrad Kielbasinski, et al. · Nanomaterials · 69
PDF
Highly conductive electronics circuits from aerosol jet printed silver inks
2021 · Kacper Skarżyński, Jakub Krzemiński, et al. · Scientific Reports · 64
PDF
Screen-Printed Resistive Pressure Sensors Containing Graphene Nanoplatelets and Carbon Nanotubes
2014 · Daniel Janczak, Marcin Słoma, et al. · Sensors · 60
PDF
Perovskite-type KTaO 3 –reduced graphene oxide hybrid with improved visible light photocatalytic activity
2015 · B. Bajorowicz, J. Reszczyńska, et al. · RSC Advances · 57
Flexible Gas Sensor Printed on a Polymer Substrate for Sub-ppm Acetone Detection
2020 · W. Andrysiewicz, J. Krzeminski, et al. · Electronic Materials Letters · 53
PDF
Graphene-Based Dipole Antenna for a UHF RFID Tag
2016 · Pawel Kopyt, Bartlomiej Salski, et al. · IEEE Transactions on Antennas and Propagation · 52
Carbon nanotube embedded adhesives for real-time monitoring of adhesion failure in high performance adhesively bonded joints
2020 · Tadej Bregar, Donglan An, et al. · Scientific Reports · 42
PDF
Electroluminescent structures printed on paper and textile elastic substrates
2014 · Marcin Sloma, Daniel Janczak, et al. · Circuit World · 41
MXenes: Multifunctional Materials for the Smart Cities of Tomorrow
2024 · Muhammad A. K. Purbayanto, Volker Presser, et al. · Advanced Functional Materials · 38
Heterophase materials for fused filament fabrication of structural electronics
2018 · B. Podsiadły, A. Skalski, et al. · Journal of Materials Science Materials in Electronics · 36
PDF
Are We Able to Print Components as Strong as Injection Molded?—Comparing the Properties of 3D Printed and Injection Molded Components Made from ABS Thermoplastic
2021 · Bartłomiej Podsiadły, Andrzej Skalski, et al. · Applied Sciences · 35
PDF
Comparison of ZnO:Al, ITO and carbon nanotube transparent conductive layers in flexible solar cells applications
2012 · Maciej Sibiński, Katarzyna Znajdek, et al. · Materials Science and Engineering B · 33
Carbon nanotube transparent conductive layers for solar cells applications
2011 · Maciej Sibiński, Małgorzata Jakubowska, et al. · Prace Naukowe Uniwersytetu Ekonomicznego we Wrocławiu · 24
PDF
Influence of Process Parameters on the Resistivity of 3D Printed Electrically Conductive Structures
2022 · Kacper Dembek, Bartłomiej Podsiadły, et al. · Micromachines · 21
PDF
SAC 305 solder paste with carbon nanotubes – part I: investigation of the influence of the carbon nanotubes on the SAC solder paste properties
2012 · K. Bukat, J. Sitek, et al. · Soldering and Surface Mount Technology · 21
Transparent Electrodes with Nanotubes and Graphene for Printed Optoelectronic Applications
2014 · Marcin Słoma, Grzegorz Wróblewski, et al. · Journal of Nanomaterials · 19
PDF
Printed transparent electrodes containing carbon nanotubes for elastic circuits applications with enhanced electrical durability under severe conditions
2010 · Małgorzata Jakubowska, Marcin Słoma, et al. · Materials Science and Engineering B · 19
Electrical performance of carbon nanotube-polymer composites at frequencies up to 220 GHz
2011 · Ali H. Alshehri, Malgorzata Jakubowska, et al. · Applied Physics Letters · 18
Printed Electronics in Radiofrequency Energy Harvesters and Wireless Power Transfer Rectennas for IoT Applications
2023 · Kacper Skarżyński, Marcin Słoma · Advanced Electronic Materials · 17
PDF
Influence of Carbon Nanoparticles Morphology on Physical Properties of Polymer Composites
2014 · G. Wróblewski, M. Słoma, et al. · Acta Physica Polonica A · 16
PDF
Investigations on printed elastic resistors containing carbon nanotubes
2011 · Marcin Słoma, Małgorzata Jakubowska, et al. · Journal of Materials Science Materials in Electronics · 16
PDF
Works count: 113
Citation count: 1,461
H-index: 19
I10-index: 38
Year
Topic
Type