Get started
Author

Shyh‐Shin Hwang

Observed names: S. S. Hwang, S.-S. Hwang, S.S. Hwang, Shyh-Shin Hwang, Shyh-shin Hwang, Shyhshin Hwang
ORCID: 0000-0001-8886-3879
Observed ORCID: 0000-0001-8886-3879
OpenAlex ID: A5079291425
Tensile, electrical conductivity and EMI shielding properties of solid and foamed PBT/carbon fiber composites
2016 · Shyh-shin Hwang · Composites Part B Engineering · 116
Effects of silica particle size on the structure and properties of polypropylene/silica composites foams
2013 · Shyh-shin Hwang, Peming P. Hsu · Journal of Industrial and Engineering Chemistry · 77
The effects of gas counter pressure and mold temperature variation on the surface quality and morphology of the microcellular polystyrene foams
2012 · Shia‐Chung Chen, Ping‐Shun Hsu, et al. · Journal of Applied Polymer Science · 76
Melt processing of polypropylene-grafted-maleic anhydride/Chitosan polymer blend functionalized with montmorillonite for the removal of lead ions from aqueous solutions
2020 · T. N. Moja, N. Bunekar, et al. · Scientific Reports · 50
PDF
Mechanical properties of polyamide-6/montmorillonite nanocomposites — Prepared by the twin-screw extruder mixed technique
2010 · Sung-Po Liu, Shyh-Shin Hwang, et al. · International Communications in Heat and Mass Transfer · 47
Effect of organoclay on the mechanical/thermal properties of microcellular injection molded PBT–clay nanocomposites
2010 · Shyh-shin Hwang, Sung-po Liu, et al. · International Communications in Heat and Mass Transfer · 47
Effect of clay and compatibilizer on the mechanical/thermal properties of microcellular injection molded low density polyethylene nanocomposites
2009 · Shyh-shin Hwang, Peming P. Hsu, et al. · International Communications in Heat and Mass Transfer · 46
Passive mold temperature control by a hybrid filming-microcellular injection molding processing
2008 · Shia-Chung Chen, Hai-Mei Li, et al. · International Communications in Heat and Mass Transfer · 46
Flame retardancy and thermal stability of ethylene-vinyl acetate copolymer nanocomposites with alumina trihydrate and montmorillonite
2013 · Ming-Kuen Chang, Shyh-Shin Hwang, et al. · Journal of Industrial and Engineering Chemistry · 42
The mechanical/thermal properties of microcellular injection‐molded poly‐lactic‐acid nanocomposites
2008 · Shyh‐Shin Hwang, Peming P. Hsu, et al. · Polymer Composites · 40
Morphology, mechanical, and rheological behavior of microcellular injection molded EVA–clay nanocomposites
2012 · Shyh-shin Hwang, Sung-po Liu, et al. · International Communications in Heat and Mass Transfer · 33
Effect of dispersion capability of organoclay on cellular structure and physical properties of PMMA/clay nanocomposite foams
2009 · Jui-Ming Yeh, Kung-Chin Chang, et al. · Materials Chemistry and Physics · 31
The dimensional stability of a microcellular injection molded gear shaft
2007 · Shyh-Shin Hwang, Zhi-Suan Ke · International Communications in Heat and Mass Transfer · 24
Effect of organoclay and preparation methods on the mechanical/thermal properties of microcellular injection molded polyamide 6-clay nanocomposites
2011 · Shyh-shin Hwang, Sung-po Liu, et al. · International Communications in Heat and Mass Transfer · 23
Effect of Gas Counter Pressure on the Surface Roughness, Morphology, and Tensile Strength between Microcellular and Conventional Injection-Molded PP Parts
2022 · Jianping Ren, Long Lin, et al. · Polymers · 19
PDF
Effect of organoclay on the mechanical / thermal properties of microcellular injection molded polystyrene–clay nanocomposites
2009 · Shyh-shin Hwang, Peming P. Hsu, et al. · International Communications in Heat and Mass Transfer · 19
Construction of control algorithm in the problem of the planar motion of a friction-powered robot with a flywheel and an eccentric weight
2020 · Marat Dosaev, Vitaly Samsonov, et al. · Applied Mathematical Modelling · 17
Using a Visualization Mold to Discuss the Influence of Gas Counter Pressure and Mold Temperature on the Fountain Flow Effect
2018 · W.-R. Jong, S.-S. Hwang, et al. · International Polymer Processing · 17
Enhancement of surface and bulk mechanical properties of polycarbonate through the incorporation of raw MWNTs — Using the twin-screw extruder mixed technique
2010 · Sung-Po Liu, Shyh-shin Hwang, et al. · International Communications in Heat and Mass Transfer · 17
Polypropylene–Polypropylene-Grafted-Maleic Anhydride–Montmorillonite Clay Nanocomposites for Pb(II) Removal
2018 · T. N. Moja, N. Bunekar, et al. · Journal of Inorganic and Organometallic Polymers and Materials · 16
The biocomposites properties of compounded poly(lactic acid) with untreated and treated spent coffee grounds
2022 · Zhi‐Hua Xiao, Xu‐Qin Hou, et al. · Journal of Applied Polymer Science · 14
Savonius rotor as a part of complex systems
2018 · Y.D. Selyutskiy, L.A. Klimina, et al. · Journal of Sound and Vibration · 12
Morphology, mechanical, thermal and rheological behavior of microcellular injection molded TPO-clay nanocomposites prepared by kneader
2011 · Shyh-shin Hwang, Sung-po Liu, et al. · International Communications in Heat and Mass Transfer · 12
Processing Effects on the Through-Plane Electrical Conductivities and Tensile Strengths of Microcellular-Injection-Molded Polypropylene Composites with Carbon Fibers
2022 · Shia-Chung Chen, Ming-Yuan Jien, et al. · Polymers · 11
PDF
Shrinkage study of textile roller molded by conventional/microcellular injection-molding process
2008 · Shyh-shin Hwang, Peming P. Hsu, et al. · International Communications in Heat and Mass Transfer · 11
Works count: 46
Citation count: 946
H-index: 17
I10-index: 27
Year
Topic
Type