Get started
Author

Shima Pashangeh

Observed names: Pashangeh, Shima, Pashangeh, Shima, S. Pashangeh
Institution: Yasouj University
ORCID: 0000-0002-7567-4603
Observed ORCID: 0000-0002-7567-4603
OpenAlex ID: A5079360727
On the decomposition of austenite in a high-silicon medium-carbon steel during quenching and isothermal holding above and below the Ms temperature
2020 · S. Pashangeh, M.C. Somani, et al. · Materials Characterization · 49
PDF
Detection and Estimation of Retained Austenite in a High Strength Si-Bearing Bainite-Martensite-Retained Austenite Micro-Composite Steel after Quenching and Bainitic Holding (Q&B)
2019 · Shima Pashangeh, Hamid Reza Karimi Zarchi, et al. · Metals · 47
PDF
Investigation into microstructural and mechanical properties of Al–Sn alloy fabricated using accumulative roll bonding combined with heat treatment
2023 · Vahid Heydari, Morteza Alizadeh, et al. · Journal of Materials Research and Technology · 28
Microstructural evolution in a high-silicon medium carbon steel following quenching and isothermal holding above and below the Ms temperature
2020 · Shima Pashangeh, Mahesh Somani, et al. · Journal of Materials Research and Technology · 26
PDF
Structural and corrosion behavior investigation of novel nano-quasicrystalline Al-Cr-Fe reinforced Al-matrix composites produced by ARB process
2021 · Shima Pashangeh, Morteza Alizadeh, et al. · Journal of Alloys and Compounds · 24
Abnormal mechanical response in a silicon bearing medium carbon low alloy steel following quenching and bainitic holding versus quenching and partitioning treatment
2020 · Shima Pashangeh, Seyyed Sadegh Ghasemi Banadkouki, et al. · Journal of Materials Research and Technology · 22
PDF
Microstructure evolution and mechanical properties evolution of high-Zn Al-Zn alloys prepared by cross accumulative roll bonding combined with heat treatment process
2022 · Neda Kalantarrashidi, Morteza Alizadeh, et al. · Journal of Alloys and Compounds · 17
Characteristics and Kinetics of Bainite Transformation Behaviour in a High-Silicon Medium-Carbon Steel above and below the Ms Temperature
2022 · Shima Pashangeh, Seyed Sadegh Ghasemi Banadkouki, et al. · Materials · 17
PDF
Consideration on zinc content on the microstructure, mechanical, and corrosion evolution of aluminum/zinc composites fabricated by CARB process
2022 · Neda Kalantarrashidi, Morteza Alizadeh, et al. · Journal of Materials Research and Technology · 15
PDF
Characterization of wear and corrosion behavior of Al/Cu/MoS2/WC hybrid metal matrix composite fabricated via accumulative roll bonding process
2025 · Morteza Alizadeh, Abbas Karimi, et al. · Journal of Materials Research and Technology · 14
Effects of substrate materials and electrodeposition parameters on hydrogen evolution reaction of Ni–Cu–Fe coatings
2024 · Mohammad Mehdi Tavallaie, Morteza Alizadeh, et al. · International Journal of Hydrogen Energy · 14
Feasibility study of producing Al–5Zn–1 Mg alloy by accumulative roll bonding process and subsequent heat treatment
2022 · Morteza Alizadeh, Faramarz Vahdatinejad, et al. · Engineering Failure Analysis · 13
Impact of graphene incorporation on the oxygen evolution reaction of Co-Fe-based electrocatalysts synthesized via one-step electrodeposition
2024 · Mohammad Jahanbazi Goujani, Morteza Alizadeh, et al. · International Journal of Hydrogen Energy · 11
Structure-Property Correlations of a Medium C Steel Following Quenching and Isothermal Holding above and below the Ms Temperature
2020 · Shima Pashangeh, Mahesh Somani, et al. · ISIJ International · 11
PDF
A novel wideband slot loaded microstrip patch antenna through reallocation of TM 1,0 , modified TM 0,2 and TM 1,2 modes
2024 · Mohammad Hadi Moradi Ardekani, Shima Pashangeh · IET Microwaves Antennas & Propagation · 9
PDF
Color Light Metallography Versus Electron Microscopy for Detecting and Estimating Various Phases in a High-Strength Multiphase Steel
2021 · Shima Pashangeh, Seyyed Sadegh Ghasemi Banadkouki, et al. · Metals · 9
PDF
Structural characteristics and corrosion properties of Cu/Sn–Pb composite produced by accumulative roll bonding process
2024 · Narges Malmir, Morteza Alizadeh, et al. · Archives of Civil and Mechanical Engineering · 6
Effect of Carbon Partitioning and Residual Compressive Stresses on the Lattice Strains of Retained Austenite During Quenching and Isothermal Bainitic Holding in a High‐Silicon Medium‐Carbon Steel
2021 · Shima Pashangeh, Seyyed Sadegh Ghasemi Banadkouki, et al. · steel research international · 6
Microstructural evolution and kinetics of the bainite transformation in a silicon-alloyed medium-carbon steel via two-step quenching and partitioning treatment
2025 · Shima Pashangeh, Seyyed Sadegh Ghasemi Banadkouki, et al. · Journal of Materials Research and Technology · 5
A Novel Method to Design Small Wideband Half Mode Cavity Antenna Under Resonances of TM₁,₁ and TM₃,₁ Modes
2024 · Mohammad Hadi Moradi Ardekani, Shima Pashangeh · IEEE Access · 5
Structure and corrosion behavior of Cu-26Zn-5Al alloy processed by accumulative roll bonding and heat treatment
2022 · Nikzad Negahdari, Morteza Alizadeh, et al. · Journal of Alloys and Compounds · 5
Phase Transformation Kinetics of Austenite in DIN 1.5025 Steel under Controlled Slow Cooling Conditions
2025 · Shima Pashangeh, Seyyed Sadegh Ghasemi Banadkouki, et al. · Journal of Materials Engineering and Performance · 3
A Wideband High-Gain Millimeter-Wave Antenna Array With Inverted-Feed Stacked Patch Design and Single-Port Compact Corporate Feed Network
2025 · Mohammad Hadi Moradi Ardekani, Shima Pashangeh · IEEE Access · 3
Phase transformation and structural development in mechano-synthesized calcium-copper-titanate electroceramics
2024 · Morteza Alizadeh, Hamed Ahmadi Ardakani, et al. · Ceramics International · 2
Fabrication and Characterization of Al/WC/MoS2 Hybrid Composite via Accumulative Roll Bonding: Microstructural Evolution, and Corrosion Behavior
2025 · Morteza Alizadeh, Mahdieh Oskouei, et al. · Metals and Materials International · 1
Works count: 41
Citation count: 365
H-index: 12
I10-index: 14
Year
Topic
Type