Get started
Author

Borja Erice

Predictions of the mechanical properties of unidirectional fibre composites by supervised machine learning
2019 · M. V. Pathan, S. A. Ponnusami, et al. · Scientific Reports · 195
PDF
Stress-state and strain-rate dependent ductile fracture of dual and complex phase steel
2017 · Borja Erice, Christian C. Roth, et al. · Mechanics of Materials · 131
A coupled elastoplastic-damage constitutive model with Lode angle dependent failure criterion
2013 · Borja Erice, Francisco Gálvez · International Journal of Solids and Structures · 126
An experimental and numerical study of ductile failure under quasi-static and impact loadings of Inconel 718 nickel-base superalloy
2014 · Borja Erice, María Jesús Pérez-Martín, et al. · International Journal of Impact Engineering · 60
A new plasticity and failure model for ballistic application
2011 · Sidney Chocron, Borja Erice, et al. · International Journal of Impact Engineering · 59
Blast Response Analysis of Reinforced Concrete Slabs: Experimental Procedure and Numerical Simulation
2011 · G. Morales-Alonso, D. A. Cendón, et al. · Journal of Applied Mechanics · 55
Flow and fracture behaviour of FV535 steel at different triaxialities, strain rates and temperatures
2011 · B. Erice, F. Gálvez, et al. · Engineering Fracture Mechanics · 53
Strain-rate and off-axis loading effects on the fibre compression strength of CFRP laminates: Experiments and constitutive modelling
2020 · Daniel Thomson, Gustavo Quino, et al. · Composites Science and Technology · 51
PDF
Experimental and numerical study of strain-rate effects on the IFF fracture angle using a new efficient implementation of Puck’s criterion
2017 · Daniel M. Thomson, Hao Cui, et al. · Composite Structures · 39
A comprehensive experimental investigation of the rate-dependent interlaminar delamination behaviour of CFRP composites
2023 · Yanhong Chen, Kai Liu, et al. · Composites Part B Engineering · 38
PDF
On the dynamic response of adhesively bonded structures
2019 · Maria Lißner, Enrique Alabort, et al. · International Journal of Impact Engineering · 34
A study on the longitudinal compression strength of fibre reinforced composites under uniaxial and off-axis loads using cross-ply laminate specimens
2019 · Daniel Thomson, Hao Cui, et al. · Composites Part A Applied Science and Manufacturing · 32
Impact behaviour of bio-inspired sandwich panels integrally manufactured from 3D printed continuous carbon fibre reinforced polyamide
2024 · I. Sukia, A. Esnaola, et al. · Composites Science and Technology · 29
Multi-material adhesively bonded structures: Characterisation and modelling of their rate-dependent performance
2020 · M. Lißner, B. Erice, et al. · Composites Part B Engineering · 22
A Puck-based localisation plane theory for rate- and pressure-dependent constitutive modelling of unidirectional fibre-reinforced polymers
2017 · Daniel M. Thomson, Borja Erice, et al. · Composite Structures · 21
Effect of the loading-rate and stress state on the constitutive modelling and fracture of 2205 Duplex stainless steel
2024 · D. Abedul, L. Galdos, et al. · International Journal of Impact Engineering · 19
Experimental determination of the dynamic fracture-initiation toughness of high-strength metals
2018 · Maria Jesus Perez-Martin, Borja Erice, et al. · Engineering Fracture Mechanics · 16
An integrated inverse numerical–experimental approach to determine the dynamic Mode-I interlaminar fracture toughness of fibre composites
2022 · Sathiskumar A. Ponnusami, Hao Cui, et al. · Composite Structures · 15
A rate dependent experimental and numerical analysis of adhesive joints under different loading directions
2018 · Maria Lißner, Enrique Alabort, et al. · The European Physical Journal Special Topics · 15
PDF
Low-velocity impact performance of integrally-3D printed continuous carbon fibre composite sandwich panels
2023 · Itxaro Sukia, Unai Morales, et al. · Materials Letters · 14
A rate-dependent Hosford-Coulomb model for predicting ductile fracture at high strain rates
2015 · Stephane J. Marcadet, Christian C. Roth, et al. · EPJ Web of Conferences · 13
PDF
Anisotropic plasticity and fracture modelling of cold rolled AA5754
2023 · Borja Erice, Bernard Rolfe, et al. · Engineering Fracture Mechanics · 11
Flow and fracture behaviour of high performance alloys
2012 · Borja Erice Echávarri · UPM Digital Archive (Technical University of Madrid) · 10
PDF
A mechanistic-finite element hybrid approach to modelling cutting forces when drilling GFRP-AISI 304 stacks
2023 · François Ducobu, Thomas Beuscart, et al. · CIRP Annals · 9
A Wedge-DCB Test Methodology to Characterise High Rate Mode-I Interlaminar Fracture Properties of Fibre Composites
2018 · Sathiskumar A. Ponnusami, Hao Cui, et al. · EPJ Web of Conferences · 9
PDF
Works count: 67
Citation count: 1,145
H-index: 16
I10-index: 23
Year
Topic
Type