Author

Atef M. Ghaleb

Observed names: Atef Ghaleb, Atef M Ghaleb, Ghaleb, Atef M.

Institution: Alfaisal University

Observed institutions: Alfaisal University, King Saud University, University of Malaya

ORCID: 0000-0003-4666-3283

Observed ORCIDs: 0000-0003-4666-3283, 0009-0004-8643-8317

OpenAlex ID: A5080896429

Recycling aluminium for sustainable development: A review of different processing technologies in green manufacturing

2024 · Sami Al-Alimi, Nur Kamilah Yusuf, et al. · Results in Engineering · 180

Assessment and Comparison of Various MCDM Approaches in the Selection of Manufacturing Process

2020 · Atef M. Ghaleb, Husam Kaid, et al. · Advances in Materials Science and Engineering · 162

Study of the Effect of Process Parameters on Surface Profile Accuracy in Single‐Point Incremental Sheet Forming of AA1050‐H14 Aluminum Alloy

2020 · Abdulmajeed Dabwan, Adham E. Ragab, et al. · Advances in Materials Science and Engineering · 41

Analyzing Critical Failures in a Production Process: Is Industrial IoT the Solution?

2018 · Shafiq Ahmad, Ahmed Badwelan, et al. · Wireless Communications and Mobile Computing · 39

Implementing an integrated maintenance management system for monitoring production lines: a case study for biscuit industry

2020 · Mokhtar Ali Amrani, Mansour Alhomdi, et al. · Journal of Quality in Maintenance Engineering · 34

An overview of selective laser sintering and melting research using bibliometric indicators

2018 · Wadea Ameen, Atef M. Ghaleb, et al. · Virtual and Physical Prototyping · 33

Revolutionizing IC Genset Operations with IIoT and AI: A Study on Fuel Savings and Predictive Maintenance

2023 · Ali S. Allahloh, Mohammad Sarfraz, et al. · Sustainability · 24

Low-Cost Goethite Nanorods for As (III) and Se (VI) Removal from Water

2020 · Mokhtar Ali Amrani, Atef M. Ghaleb, et al. · Applied Sciences · 23

Intensification and Optimization of FAME Synthesis via Acid-Catalyzed Esterification Using Central Composite Design (CCD)

2023 · Alaaddin M. M. Saeed, Shivika Sharma, et al. · ACS Omega · 19

Normative Static Grip Strength of Saudi Arabia’s Population and Influences of Numerous Factors on Grip Strength

2021 · Abdalla Alrashdan, Atef M. Ghaleb, et al. · Healthcare · 18

Integration of Phase Change Materials in Service Areas of Building Envelopes for Improved Thermal Performance: An Experimental Study in Saudi Arabia

2024 · Abdalla Alrashdan, Atef M. Ghaleb, et al. · Buildings · 17

Challenges to Female Engineers’ Employment in the Conservative and Unstable Society of Taiz State, Yemen: A Survey Study

2023 · Halah Abdalnour, Laila Abdulkhaliq, et al. · Sustainability · 15

Perceptions of Work–Family–Engineering Relationships Among Employed Female Engineers in Yemen: A Survey Study

2025 · Atef M. Ghaleb, Laila Abdulkhaliq, et al. · Societies · 14

Response surface methodology and machine learning optimisations comparisons of recycled AA6061-B4C–ZrO2 hybrid metal matrix composites via hot forging forming process

2024 · Sami Al-Alimi, Nur Kamilah Yusuf, et al. · Heliyon · 14

Using Electroencephalography (EEG) Power Responses to Investigate the Effects of Ambient Oxygen Content, Safety Shoe Type, and Lifting Frequency on the Worker’s Activities

2020 · Mohamed Z. Ramadan, Atef M. Ghaleb, et al. · BioMed Research International · 13

Integration of Industrial Internet of Things (IIoT) and Digital Twin Technology for Intelligent Multi-Loop Oil-and-Gas Process Control

2025 · Ali Saleh Allahloh, Mohammad Sarfraz, et al. · Machines · 11

Socioeconomic Status as a Predictor of the Academic Achievement of Engineering Students in Taiz State, Yemen

2024 · Atef M. Ghaleb, Mokhtar Ali Amrani, et al. · Societies · 11

Implementing circularity measurements in industry 4.0-based manufacturing metrology using MQTT protocol and Open CV: A case study

2023 · Yazid Saif, Yusri Yusof, et al. · PLoS ONE · 11

Effect of Ambient Oxygen Content, Safety Shoe Type, and Lifting Frequency on Subject’s MAWL and Physiological Responses

2019 · Atef M. Ghaleb, Mohamed Z. Ramadan, et al. · International Journal of Environmental Research and Public Health · 11

An in-depth comparative FEA on through-thickness residual stresses in press-braked cold-formed steel section

2024 · Ayad Mutafi, J.M. Irwan, et al. · Results in Engineering · 10

Optimizing strength of directly recycled aluminum chip-based parts through a hybrid RSM-GA-ANN approach in sustainable hot forging

2024 · Yahya M. Altharan, Shazarel Shamsudin, et al. · PLoS ONE · 10

Life cycle assessment of direct recycling hot press forging of aluminium AA7075 metal matrix composite

2024 · Muhamad Haikal Mohd Khaireez, Nur Kamilah Yusuf, et al. · Materials Research Express · 10

Multiobjective optimization of process variables in single-point incremental forming using grey relational analysis coupled with entropy weights

2021 · Abdulmajeed Dabwan, Adham E Ragab, et al. · Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications · 10

Effect of hypoxia, safety shoe type, and lifting frequency on cardiovascular and ventilation responses

2020 · Atef M. Ghaleb, Mohamed Z. Ramadan, et al. · International Journal of Industrial Ergonomics · 9

Barriers to the Effective Use of Technology in Higher Education Institutions in Yemen: A Case Study of Engineering Colleges

2023 · Mokhtar Ali Amrani, Basher Al-Tayar, et al. · Albaydha University Journal · 8

Works count: 48

Citation count: 797

H-index: 14

I10-index: 23