Get started
Author

Michael Flouros

Observed names: Flouros, Michael, M Flouros, M. Flouros
ORCID: 0000-0002-6033-1229
Observed ORCID: 0000-0002-6033-1229
OpenAlex ID: A5081036150
Correlations for heat generation and outer ring temperature of high speed and highly loaded ball bearings in an aero-engine
2006 · Michael Flouros · Aerospace Science and Technology · 47
Comparison of Power Losses and Temperatures between an All-Steel and a Direct Outer Ring–Cooled, Hybrid 133-mm-Bore Ball Bearing at Very High Speeds
2016 · Peter Gloeckner, Matthias Martin, et al. · Tribology Transactions · 30
Analysis of turbine blade cooling effect on recuperative gas turbines cycles performance
2018 · Christina Salpingidou, Dimitra Tsakmakidou, et al. · Energy · 29
Thermodynamic analysis of recuperative gas turbines and aero engines
2017 · C. Salpingidou, Z. Vlahostergios, et al. · Applied Thermal Engineering · 29
Effect of turbulence intensity on the pressure drop and heat transfer in a staggered tube bundle heat exchanger
2014 · Z. Vlahostergios, D. Missirlis, et al. · Experimental Thermal and Fluid Science · 28
Direct Outer Ring Cooling of a High Speed Jet Engine Mainshaft Ball Bearing: Experimental Investigation Results
2011 · Peter Gloeckner, Klaus Dullenkopf, et al. · Journal of Engineering for Gas Turbines and Power · 28
Active Outer Ring Cooling of High Loaded and High Speed Ball Bearings
2012 · Michael Flouros, Markus Hirschmann, et al. · ASME Turbo Expo: Turbomachinery Technical Conference and Exposition (GT) · 24
Optimization of Heat Exchangers for Intercooled Recuperated Aero Engines
2017 · Dimitrios Misirlis, Zinon Vlahostergios, et al. · Aerospace · 22
PDF
Experimental and Numerical Investigation of the Outer Ring Cooling Concept in a Hybrid and in an All-Steel Ball Bearing Used in Aero-Engines by the Introduction of a Helical Duct
2018 · Michael Flouros, Peter Gloeckner, et al. · Aerospace · 19
Reduction of Power Losses in Bearing Chambers Using Porous Screens Surrounding a Ball Bearing
2005 · Michael Flouros · Journal of Engineering for Gas Turbines and Power · 19
Thermal and Flow Phenomena Associated With the Behavior of Brush Seals in Aero Engine Bearing Chambers
2015 · Michael Flouros, Patrick Hendrick, et al. · Journal of Engineering for Gas Turbines and Power · 17
The Impact of Oil and Sealing Air Flow, Chamber Pressure, Rotor Speed, and Axial Load on the Power Consumption in an Aeroengine Bearing Chamber
2005 · Michael Flouros · Journal of Engineering for Gas Turbines and Power · 16
Numerical Investigation on Windback Seals Used in Aero Engines
2018 · Michael Flouros, Francois Cottier, et al. · Aerospace · 14
PDF
Analytical and Numerical Simulations of the Two-Phase Flow Heat Transfer in the Vent and Scavenge Pipes of the CLEAN Engine Demonstrator
2009 · Michael Flouros · Journal of Turbomachinery · 13
Two-Phase Flow Heat Transfer and Pressure Drop in Horizontal Scavenge Pipes in an Aero-engine
2014 · Michael Flouros, Georgios Iatrou, et al. · Journal of Engineering for Gas Turbines and Power · 12
Active Outer Ring Cooling of High-Loaded and High-Speed Ball Bearings
2013 · Michael Flouros, Markus Hirschmann, et al. · Journal of Engineering for Gas Turbines and Power · 11
Two-Phase Flow Pressure Drop in Corrugated Tubes Used in an Aero-engine Oil System
2015 · Michael Flouros, Andreas Kanarachos, et al. · Journal of Engineering for Gas Turbines and Power · 10
Thermodynamics Cycle Analysis, Pressure Loss, and Heat Transfer Assessment of a Recuperative System for Aero-Engines
2014 · A. Goulas, S. Donnerhack, et al. · Journal of Engineering for Gas Turbines and Power · 10
Impact of Screens Around Bearings on the Flow and Heat Transfer in the Vent and Scavenge Oil Pipes in Bearing Chambers
2010 · Michael Flouros, Francois Cottier · Journal of Engineering for Gas Turbines and Power · 9
Best Strategies for the Development of a Holistic Porosity Model of a Heat Exchanger for Aero Engine Applications
2015 · K. Yakinthos, D. Misirlis, et al. · ASME Turbo Expo: Turbomachinery Technical Conference and Exposition (GT) · 8
Transient Temperature Measurements in the Contact Zone Between Brush Seals of Kevlar and Metallic Type for Bearing Chamber Sealing Using a Pyrometric Technique
2013 · Michael Flouros, Martin Stadlbauer, et al. · Journal of Engineering for Gas Turbines and Power · 7
The Effect of Turbine Blade Cooling on the Performance of Recuperative Cycles for Gas Turbines Applications
2017 · C. Salpingidou, D. Tsakmakidou, et al. · Chemical engineering transactions · 6
PDF
Calculation of the View Factors for Radiant Heat Exchange in a New Volumetric Receiver With Tapered Ducts
1995 · M. Flouros, S. Bungart, et al. · Journal of Solar Energy Engineering · 6
Numerical assessment of the performance of a heat exchanger for a low pressure ratio gas turbine
2018 · Christina Salpingidou, Dimitrios Misirlis, et al. · Energy · 5
Ejector Application for Scavenging of an Aero Engine Bearing Chamber
2017 · Michael Flouros, Christina Salpingidou, et al. · Journal of Engineering for Gas Turbines and Power · 5
Works count: 47
Citation count: 464
H-index: 13
I10-index: 18
Year
Topic
Type