Get started
Author

Thomas E. Henke

Design of High Preformance CMC Brake Discs
1998 · Walter Krenkel, T. Henke · Key engineering materials · 52
Atomic layer deposition for high aspect ratio through silicon vias
2013 · Martin Knaut, Marcel Junige, et al. · Microelectronic Engineering · 47
Thermal regime of the Costa Rican convergent margin: 1. Along‐strike variations in heat flow from probe measurements and estimated from bottom‐simulating reflectors
2010 · Robert N. Harris, Ingo Grevemeyer, et al. · Geochemistry Geophysics Geosystems · 45
PDF
Derivation of anisotropic flow curves of ferrite–pearlite pipeline steel via a two-level homogenisation scheme
2012 · G. Laschet, P. Fayek, et al. · Materials Science and Engineering A · 36
Microstructure evolution during hot deformation of Ti-6Al-4V double cone specimens
2010 · F. Warchomicka, C. Poletti, et al. · International Journal of Material Forming · 24
In-Situ Joined CMC Components
1996 · Walter Krenkel, T. Henke, et al. · Key engineering materials · 23
Growth of aluminum oxide thin films with enhanced film density by the integration of in situ flash annealing into low-temperature atomic layer deposition
2016 · Thomas Henke, Martin Knaut, et al. · Surface and Coatings Technology · 19
Flash-Enhanced Atomic Layer Deposition: Basics, Opportunities, Review, and Principal Studies on the Flash-Enhanced Growth of Thin Films
2015 · Thomas Henke, Martin Knaut, et al. · ECS Journal of Solid State Science and Technology · 19
PDF
Atomic layer deposition of tantalum oxide thin films using the precursor tert-butylimido-tris-ethylmethylamido-tantalum and water: Process characteristics and film properties
2017 · Thomas Henke, Martin Knaut, et al. · Thin Solid Films · 15
Towards integrative computational materials engineering of steel components
2011 · G. J. Schmitz, S. Benke, et al. · Production Engineering · 15
Modelling of static recrystallization kinetics by coupling crystal plasticity FEM and multiphase field calculations
2013 · O. Güvenci, Thomas Henke, et al. · Computer Methods in Materials Science. · 13
Quantification of uncertainties in grain size predictions of a microstructure-based flow stress model and application to gear wheel forging
2013 · T. Henke, M. Bambach, et al. · CIRP Annals · 10
Real-time Feedback of Pedal Forces for the Optimization of Pedaling Technique in Competitive Cycling
1998 · Thomas Henke · ISBS - Conference Proceedings Archive · 10
Experimental Uncertainties affecting the Accuracy of Stress-Strain Equations by the Example of a Hensel-Spittel Approach
2011 · T. Henke, M. Bambach, et al. · AIP conference proceedings · 9
Prediction of Microstructure and Resulting Rolling Forces by Application of a Material Model in a Hot Ring Rolling Process
2014 · Gideon Schwich, Thomas Henke, et al. · Key engineering materials · 7
Model-Based Identification of the Base of the Gas Hydrate Stability Zone in Multichannel Reflection Seismic Data, Offshore Costa Rica
2009 · Romina Gehrmann, Christian Müller, et al. · International Journal of Geophysics · 7
PDF
Optimization of a Closed Die Forging Process to Manufacture a Gear Wheel by the Use of a Response Surface Model
2014 · Thomas Henke, Gerhard Hirt, et al. · Advanced materials research · 6
Impact of the Microstructure on the U–O Forming Simulations of a Ferrite–Pearlite Pipeline Tube
2014 · Gottfried Laschet, Mohit Shukla, et al. · steel research international · 6
Air fatigue of notched 1018 steel in the endurance limit range
1976 · William H. Hartt, Joseph E. Fluet, et al. · Metallurgical Transactions A · 6
Non-destructive injectability measurements for fibre preforms and semi-finished textiles
2020 · T. Hermann, A. Schelte, et al. · Composites Part A Applied Science and Manufacturing · 5
Formation of regularly arranged large grain silicon islands by using embedded micro mirrors in the flash crystallization of amorphous silicon
2014 · Thomas Henke, Johann W. Bartha, et al. · Journal of Applied Physics · 5
Application of a Material Model to Predict Rolling Forces and Microstructure during a Hot Ring Rolling Process
2013 · Thomas Henke, Gerhard Hirt, et al. · Materials science forum · 5
Test Case Gearing Component
2012 · Sergey Konovalov, Thomas Henke, et al. · 4
Virtual Production Systems
2011 · Wolfgang Schulz, Christian Bischof, et al. · Springer eBooks · 4
Cathodic Protection Criteria for Notched Mild Steel Undergoing Corrosion Fatique In Sea Water
1975 · William H. Hartt, Joseph E. Fluet, et al. · Offshore Technology Conference · 4
Works count: 50
Citation count: 417
H-index: 11
I10-index: 13
Year
Topic
Type