Get started
Author

Brahim Fnides

Machinability investigation in hard turning of AISI D3 cold work steel with ceramic tool using response surface methodology
2014 · H. Aouici, H. Bouchelaghem, et al. · The International Journal of Advanced Manufacturing Technology · 98
Modeling and optimization of hard turning of X38CrMoV5-1 steel with CBN tool: Machining parameters effects on flank wear and surface roughness
2011 · Hamdi Aouici, Mohamed Athmane Yallese, et al. · Journal of Mechanical Science and Technology · 70
Cutting forces and surface roughness in hard turning of hot work steel X38CrMoV5-1 using mixed ceramic
2008 · B. Fnides, Mohamed Athmane Yallese · DMG-Lib Digital Mechanism and Gear Library · 64
Application of response surface methodology for determining cutting force model in turning hardened AISI H11 hot work tool steel
2011 · B FNIDES, M A YALLESE, et al. · Sadhana · 60
Design optimization of cutting parameters when turning hardened AISI H11 steel (50 HRC) with CBN7020 tools
2016 · S. Benlahmidi, H. Aouici, et al. · The International Journal of Advanced Manufacturing Technology · 39
Performance comparison of wiper and conventional ceramic inserts in hard turning of AISI 4140 steel: analysis of machining forces and flank wear
2016 · H. Aouici, M. Elbah, et al. · The International Journal of Advanced Manufacturing Technology · 36
Machinability investigation in hard turning of AISI H11 hot work steel with CBN tool
2010 · H. Aouici, M.A. Yallese, et al. · Mechanika · 34
PDF
Hard turning of hot work steel AISI H11: Evaluation of cutting pressures, resulting force and temperature
2016 · B. Fnides, Mohamed Athmane Yallese, et al. · 33
Surface roughness model in turning hardened hot work steel using mixed ceramic tool
2009 · B. Fnides, M. A. Yallese, et al. · Mechanika · 28
PDF
Surface roughness evaluation of various cutting materials in hard turning of AISI H11
2015 · H. Aouici, B. Fnides, et al. · International Journal of Industrial Engineering Computations · 23
PDF
Comparison on various machinability aspects between mixed and reinforced ceramics when machining hardened steels
2019 · Hamdi Aouici, Mohamed Elbah, et al. · Mechanics & Industry · 17
Comparative assessment of coated and uncoated ceramic tools on cutting force components and tool wear in hard turning of AISI H11 steel using Taguchi plan and RMS
2017 · H Aouici, A Khellaf, et al. · Sadhana · 14
Tool life evaluation of cutting materials in hard turning of AISI H11; pp. 143–151
2013 · Brahim Fnides, Smail Boutabba, et al. · Estonian Journal of Engineering · 11
Comparison between mixed ceramic and reinforced ceramic tools in terms of cutting force components modelling and optimization when machining hardened steel AISI 4140 (60 HRC)
2015 · B. Fnides, H. Aouici, et al. · Mechanics & Industry · 10
PDF
Influence of tribological parameters on S335 steel filing Ti–W–N in dry sliding wear: Prediction model and sliding condition optimization
2017 · K. Sail, H. Aouici, et al. · The International Journal of Advanced Manufacturing Technology · 6
Analysis of technological parameters through response surface methodology in machining hardened X38CrMoV5-1 using whisker ceramic tool (Al2O3+SiC); pp. 26–41
2012 · Brahim Fnides, Sofiane Berkani, et al. · Estonian Journal of Engineering · 6
Effects of cutting conditions in turning of annealed and treated Ti6Al4V titanium alloy: modelling and optimization using GA and MOAVOA methods
2025 · Hacene Sassi, Brahim Fnides, et al. · The International Journal of Advanced Manufacturing Technology · 1
Experimental Analysis of the Mechanical Characteristics of Aluminum Alloys (AlSi8Cu3)
2023 · Mohamed Fnides, Toufik Bensana, et al. · Annales de Chimie Science des Matériaux
PDF
Works count: 19
Citation count: 550
H-index: 12
I10-index: 14
Year
Topic
Type