Get started
Author

S. J. A. Rizvi

Observed names: S. Javed Ahmed Rizvi, S.J.A. Rizvi, Syed J. A. Rizvi, Syed Javed A. Rizvi, Syed Javed Ahmad Rizvi
ORCID: 0000-0002-2368-3006
Observed ORCID: 0000-0002-2368-3006
OpenAlex ID: A5081266191
Ultrasound assisted cyclic solid-state foaming for fabricating ultra-low density porous acrylonitrile–butadiene–styrene foams
2012 · Abhishek Gandhi, Neelanchali Asija, et al. · Materials Letters · 42
Effect of injection molding parameters on crystallinity and mechanical properties of isotactic polypropylene
2017 · S. J. A. Rizvi · International Journal of Plastics Technology · 35
Synthesis, characterization and optimization of sulfonated poly-ether-ether-ketone (sPEEK)/functionalized carbon nanotubes (c-CNTs) nanocomposite membranes for fuel cell application
2024 · Mawlood Maajal Ali, Ali Basem, et al. · Chinese Journal of Analytical Chemistry · 32
Optimization of tensile properties of injection molded α-nucleated polypropylene using response surface methodology
2017 · S.J.A. Rizvi, Ankit Kumar Singh, et al. · Polymer Testing · 28
Synthesis and structural properties of sulfonated poly ether ether ketone (SPEEK) and Poly ether ether ketone (PEEK)
2020 · Salah M. S. Al-Mufti, Mawlood Maajal Ali, et al. · AIP conference proceedings · 25
Unsaturated Polyester Resin Filled with Cementitious Materials: A Comprehensive Study of Filler Loading Impact on Mechanical Properties, Microstructure, and Water Absorption
2023 · Salah M. S. Al-Mufti, Asma Almontasser, et al. · ACS Omega · 24
PDF
Optimization of Microcellular Injection Molding Parameters
2009 · S. J. A. Rizvi, N. Bhatnagar · International Polymer Processing · 24
Effect of particle size on thermomechanical properties of particulate polymer composite
2013 · M. Hossein Alaei, Puneet Mahajan, et al. · Iranian Polymer Journal · 22
Innovative Approach to Fuel Cell Bipolar Plate Using Conductive Polymer Blend Composites: Selective Localization of Carbon Fiber at the Interface of Polymer Blends
2023 · Salah M. S. Al-Mufti, Asma Almontasser, et al. · Journal of Inorganic and Organometallic Polymers and Materials · 19
Single and double thermal reduction processes for synthesis reduced graphene oxide assisted by a muffle furnace: A facile robust synthesis and rapid approach to enhance electrical conductivity
2022 · Salah M. S. Al-Mufti, Asma Almontasser, et al. · AIP Advances · 18
Synthesis and characterization of sulfonated poly ether ether ketone (SPEEK)/ CNTs composite proton exchange membrane for application in fuel cells
2018 · Mawlood Maajal Ali, Ameer Azam, et al. · Materials Today Proceedings · 16
Optimization of sPEEK/S-TiO2 nanocomposite membranes using response surface methodology for low-temperature fuel cell
2024 · Mawlood Maajal Ali, Ali Basem, et al. · Results in Engineering · 14
Investigating the performance of functionalized and pristine graphene oxide impregnated Nexar™ nanocomposite membranes for PEM fuel cell
2022 · M. Yusuf Ansari, Khursheed B. Ansari, et al. · Chemical Engineering Journal Advances · 14
PDF
Microcellular PP vs. Microcellular PP/MMT Nanocomposites: A Comparative Study of Their Mechanical Behavior
2011 · S. J. A. Rizvi, N. Bhatnagar · International Polymer Processing · 12
Influence of temperature variations on the dielectric parameters of thermally reduced graphene oxide
2022 · Salah M.S. Al-Mufti, Asma Almontasser, et al. · Materials Today Proceedings · 11
Thermoset‐Based Composite Bipolar Plates in Proton Exchange Membrane Fuel Cell
2023 · Salah M.S. Al‐Mufti, S.J.A. Rizvi · 10
RETRACTED: TiO2 and sulfonated TiO2 nanoparticles modified nexar membranes for hydrogen-powered PEM fuel cell
2024 · M. Yusuf Ansari, Khursheed B. Ansari, et al. · International Journal of Hydrogen Energy · 9
Fabrication of proton exchange membranes and effect of sulfonated SiO2 (S-SiO2) in sulfonated polyether ether ketone (SPEEK) for fuel cells applications
2019 · Mawlood Maajal Ali, S. J. A. Rizvi, et al. · IOP Conference Series Materials Science and Engineering · 8
PDF
Silica and Sulfonated Silica Functionalized Nexar Nanocomposite Membranes for Application in Proton Exchange Membrane Fuel Cell
2023 · M. Yusuf Ansari, Khursheed B. Ansari, et al. · Arabian Journal for Science and Engineering · 7
Design and fabrication of humidity sensor
2021 · Mohd Mohsin Ikram, Farhan Ahmed, et al. · Materials Today Proceedings · 5
Design and fabrication of expandable cavity injection mold for open cell microcellular foam
2019 · S. J. A. Rizvi, Naresh Bhatnagar · The International Journal of Advanced Manufacturing Technology · 5
Preparation and Properties of Novel Sulfonated Pentablock Copolymer (sPBC) Membrane for PEM Fuel Cell
2020 · M. Yusuf Ansari, S. J. A. Rizvi, et al. · Smart innovation, systems and technologies · 4
Influence of Crystal Structure on Thermo-Mechanical Properties of Injection Molded 𝛃-Nucleated iPP
2021 · A. Hamza, R. K. Arya, et al. · International Polymer Processing · 3
Synthesis and characterization of sulfonated poly ether ether ketone (sPEEK) membranes for low temperature fuel cells
2018 · Mawlood Maajal Ali, S. J. A. Rizvi, et al. · AIP conference proceedings · 3
Applications of Nanofillers in Proton Exchange Membrane Fuel Cells
2024 · Salah M. S. Al-Mufti, Asma Almontasser, et al. · Springer eBooks · 2
Works count: 33
Citation count: 395
H-index: 13
I10-index: 16
Year
Topic
Type