Get started
Author

Ekrem Oezkaya

Observed names: E. Oezkaya, E. Özkaya, Ekrem ÖZKAYA, Ekrem Özkaya, Özkaya, Ekrem
ORCID: 0000-0002-4309-2238
Observed ORCID: 0000-0002-4309-2238
OpenAlex ID: A5081560710
Experimental studies and CFD simulation of the internal cooling conditions when drilling Inconel 718
2016 · Ekrem Oezkaya, Nicolas Beer, et al. · International Journal of Machine Tools and Manufacture · 82
Drilling of Inconel 718 with Geometry-modified Twist Drills
2014 · Nicolas Beer, Ekrem Özkaya, et al. · Procedia CIRP · 69
Vibration Suppression in Turning TiAl6V4 Using Additively Manufactured Tool Holders with Specially Structured, Particle Filled Hollow Elements
2019 · Florian A.M. Vogel, Sebastian Berger, et al. · Procedia Manufacturing · 46
PDF
Cutting-fluid flow with chip evacuation during deep-hole drilling with twist drills
2021 · Andreas Baumann, Ekrem Oezkaya, et al. · European Journal of Mechanics - B/Fluids · 37
PDF
Finite element simulations of cutting force, torque, and temperature in drilling of Inconel 718
2019 · Necati Uçak, Adem Çiçek, et al. · Procedia CIRP · 35
CFD simulation for internal coolant channel design of tapping tools to reduce tool wear
2017 · D. Biermann, E. Oezkaya · CIRP Annals · 32
Simulative analyses focused on the changes in cutting fluid supply of twist drills with a modified flank face geometry
2020 · Ekrem Oezkaya, Milan Bücker, et al. · International Journal of Mechanical Sciences · 25
A thermomechanical analysis leading to a novel flank face design providing longer tool lives for tools used in the drilling of Inconel 718
2019 · Ekrem Oezkaya, Milan Bücker, et al. · The International Journal of Advanced Manufacturing Technology · 25
Segmented and mathematical model for 3D FEM tapping simulation to predict the relative torque before tool production
2017 · Ekrem Oezkaya, Dirk Biermann · International Journal of Mechanical Sciences · 25
Fluid structure interaction (FSI) modelling of deep hole twist drilling with internal cutting fluid supply
2019 · E. Oezkaya, I. Iovkov, et al. · CIRP Annals · 24
Modeling the motion of the cooling lubricant in drilling processes using the finite volume and the smoothed particle hydrodynamics methods
2017 · Dirk Schnabel, Ekrem Özkaya, et al. · Computer Methods in Applied Mechanics and Engineering · 22
Development of a geometrical torque prediction method (GTPM) to automatically determine the relative torque for different tapping tools and diameters
2018 · Ekrem Oezkaya, Dirk Biermann · The International Journal of Advanced Manufacturing Technology · 21
A new reverse engineering method to combine FEM and CFD simulation three-dimensional insight into the chipping zone during the drilling of Inconel 718 with internal cooling
2018 · Ekrem Oezkaya, Dirk Biermann · Machining Science and Technology · 20
Experimental and computational analysis of the coolant distribution considering the viscosity of the cutting fluid during machining with helical deep hole drills
2022 · Ekrem Oezkaya, Sebastian Michel, et al. · Advances in Manufacturing · 18
PDF
Development of a three-dimensional finite element method simulation model to predict modified flow drilling tool performance
2018 · Ekrem Oezkaya, Stefan Hannich, et al. · International Journal of Material Forming · 17
Chip formation simulation and analysis of the mechanical loads during micro single-lip deep hole drilling of Inconel 718 with varying cooling lubricant pressure
2021 · Ekrem Oezkaya, Sebastian Michel, et al. · Production Engineering · 15
3D numerical modelling of micro-milling process of Ti6Al4V alloy and experimental validation
2017 · İrfan Ucun, Kubilay Aslantas, et al. · Advances in Materials and Processing Technologies · 15
Experimental studies and FEM simulation of helical-shaped deep hole twist drills
2017 · Ekrem Oezkaya, Sebastian Michel, et al. · Production Engineering · 14
Experimental investigations for a simulative optimization of the cutting edge design of twist drills used in the machining of Inconel 718
2017 · Dirk Biermann, Milan Bücker, et al. · Procedia Manufacturing · 11
PDF
A New Flank Face Design Leading to an Improved Process Performance when Drilling High-Temperature Nickel-Base Alloys
2020 · Milan Bücker, Ekrem Oezkaya, et al. · SSRN Electronic Journal · 10
Transient Simulation of Cooling-Lubricant Flow for Deep-Hole Drilling-Processes
2018 · Dirk Schnabel, Ekrem Özkaya, et al. · Procedia CIRP · 10
PDF
Experimental and computational investigations on the effects of deep-temperature emulsion on the turning of Inconel 718 alloy
2020 · Milan Bücker, Andrea De Bartolomeis, et al. · CIRP journal of manufacturing science and technology · 9
Review of chatter control techniques in turning and boring
2025 · Hüseyin Alp Çetindağ, Ekrem Oezkaya, et al. · The International Journal of Advanced Manufacturing Technology · 8
Geometry modifications of single-lip drills to improve cutting fluid flow
2022 · Andreas Baumann, Ekrem Oezkaya, et al. · The International Journal of Advanced Manufacturing Technology · 8
PDF
Integration of Lattice Structures into the Boring Bars as a Passive Chatter Suppression Technique: Concepualization, Modelling and Simulation
2025 · Ekrem Oezkaya, Kubilay Aslantas, et al. · Vibration · 7
Works count: 48
Citation count: 643
H-index: 15
I10-index: 21
Year
Topic
Type