Author

T. Sathish

Observed names: Sathish T., Sathish Thanikodi, Sathish, T.

Institutions: Vel Tech Rangarajan Dr. Sagunthala R&D Institute of Science and Technology, Saveetha University

Observed institutions: Vel Tech Rangarajan Dr. Sagunthala R&D Institute of Science and Technology, Saveetha University

ORCID: 0009-0001-3616-3608

Observed ORCIDs: 0009-0001-3616-3608, 0000-0001-5260-3741

OpenAlex ID: A5082704849

Amplifying thermal performance of solar flat plate collector by Al2O3/ Cu/MWCNT/SiO2 mono and hybrid nanofluid

2024 · T. Sathish, Jayant Giri, et al. · Applied Thermal Engineering · 347

Performance enhancement on hybrid composite using multiwall carbon nanotubes for prosthetic sockets

2024 · T. Sathish · Interactions · 179

Performance analysis and optimization of thermal barrier coated piston diesel engine fuelled with biodiesel using RSM

2024 · G. Anjaneya, S. Sunil, et al. · Case Studies in Thermal Engineering · 170

Physico-chemical characterization of cupola slag: Enhancing its utility in construction

2024 · S. S. Meshram, S. P. Raut, et al. · AIP Advances · 159

Synthesis, characterization and application of rare earth (Lu3+) doped zinc ferrites in carbon monoxide gas sensing and supercapacitors

2024 · Shainaz Nadaf, B. Chethan, et al. · Ceramics International · 142

Forces of flexural and tensile characteristics with nano cobalt filler in Carbon/Pineapple Leaf fiber composites

2024 · T. Sathish · Interactions · 138

Comparative investigation of mechanical properties in banana fiber and ramie fiber composites enhanced by SiC nanoparticles

2024 · T. Sathish, Jayant Giri, et al. · AIP Advances · 119

PDF

Exponential smoothing method against the gradient boosting machine learning algorithm-based model for materials forecasting to minimize inventory

2024 · T. Sathish, Divity SaiKumar, et al. · AIP Advances · 116

A compact smiley shaped flexible patch antenna for ISM band applications

2024 · S. Julius Fusic, T. Sugumari, et al. · AIP Advances · 116

Comprehensive insights on mechanical properties of natural–synthetic fibers with MWCNT nano-composite

2024 · S. Jothi Arunachalam, R. Saravanan, et al. · AIP Advances · 114

Materials requirement prediction challenges addressed through SDM and MEIO

2024 · T. Ashok, T. Sathish, et al. · AIP Advances · 103

Mechanical (static and dynamic) characterization and thermal stability of hybrid green composites for engineering applications

2024 · S. Sathees Kumar, P. Shyamala, et al. · Journal of Materials Research and Technology · 103

A novel study on the stacking sequence and mechanical properties of Jute-Kevlar-Epoxy composites

2024 · Abhilash Purohit, Janaki Dehury, et al. · Interactions · 71

Comparing Kevlar Fiber influence on PP/sisal/SiO2 nanoparticle fillers/Kevlar hybrid nanocomposites with plain nanocomposite for enhanced mechanical properties

2024 · T. Sathish, R. Saravanan, et al. · Interactions · 64

Effect of nano-particle weight percent on the flexural strength of Jute/kenaf/glass fiber composite using RSM

2024 · S. Jothi Arunachalam, R. Saravanan, et al. · Interactions · 62

Enhanced mechanical strength and biodegradability of PLA-based bioplastics reinforced with TiO 2 and graphene oxide

2025 · T. Sathish, Jayant Giri, et al. · Materials Technology · 37

Machinability of different cutting tool materials for electric discharge machining: A review and future prospects

2024 · M. S. Tufail, Jayant Giri, et al. · AIP Advances · 31

PDF

Mechanical and erosion performance of sugarcane biochar-reinforced polymer composites

2022 · R. Sundarakannan, V. Arumugaprabu, et al. · Biomass Conversion and Biorefinery · 31

Energy-efficient FDM printing of sustainable polymers: Optimization strategies for material and process performance

2024 · Subramani Raja, Rusho Maher Ali, et al. · Applied Chemical Engineering · 28

PDF

An experimental study of the impact of various infill parameters on the compressive strength of 3D printed PETG/CF

2024 · Shashwath Patil, T. Sathish, et al. · AIP Advances · 27

Investigation of chemically treated jute/kenaf/glass fiber with TiO2 nano-filler for tensile and impact characteristics

2024 · S. Jothi Arunachalam, R. Saravanan, et al. · AIP Advances · 27

PDF

Predictive modelling and optimization of WEDM parameter for Mg–Li alloy using ANN integrated CRITIC-WASPAS approach

2024 · V. Kavimani, P.M. Gopal, et al. · Heliyon · 24

Impact of different parameters in tribological properties of enset ventricosum/ terminalia arjuna fibers /SiO2 filler incorporation

2024 · Satishkumar P, K Sunil Ratna Kumar, et al. · Journal of Materials Research and Technology · 23

Impact of nano-hybridization on flexural and impact behavior of basalt/glass fiber-epoxy composites for automotive structures

2024 · V. Boobalan, T. Sathish, et al. · AIP Advances · 21

PDF

Influence of machining process of MoS2/B4C/Az31 Mg alloy composite and its tribological characteristics

2024 · Jothi Arunachalam, Saravanan R, et al. · AIP Advances · 17

PDF

Works count: 84

Citation count: 2,534

H-index: 23

I10-index: 36