Get started
Author

Ainhara Garay

Observed names: A Garay, A. Garay, AINHARA GARAY ARAICO, Garay, Ainhara
Observed institution: Mondragon Unibertsitatea
ORCID: 0000-0002-3099-6166
Observed ORCID: 0000-0002-3099-6166
OpenAlex ID: A5082944973
Machinability of titanium alloys (Ti6Al4V and Ti555.3)
2008 · P.-J. Arrazola, A. Garay, et al. · Journal of Materials Processing Technology · 621
Mechanical characterization and modelling of Inconel 718 material behavior for machining process assessment
2016 · A. Iturbe, E. Giraud, et al. · Materials Science and Engineering A · 153
PDF
Surface Integrity Analysis when Machining Inconel 718 with Conventional and Cryogenic Cooling
2016 · A. Iturbe, E. Hormaetxe, et al. · Procedia CIRP · 128
PDF
Comparison of the machinabilities of Ti6Al4V and TIMETAL® 54M using uncoated WC–Co tools
2009 · M. Armendia, A. Garay, et al. · Journal of Materials Processing Technology · 125
Ti6Al4V metal cutting chip formation experiments and modelling over a wide range of cutting speeds
2018 · Thomas H.C. Childs, Pedro-J. Arrazola, et al. · Journal of Materials Processing Technology · 65
Analysis of residual stress and work-hardened profiles on Inconel 718 when face turning with large-nose radius tools
2014 · A. Madariaga, J. A. Esnaola, et al. · The International Journal of Advanced Manufacturing Technology · 65
High bandwidth temperature measurement in interrupted cutting of difficult to machine materials
2010 · M. Armendia, A. Garay, et al. · CIRP Annals · 65
Influence of Heat Treatment on the Machinability of Titanium Alloys
2012 · M. Armendia, P. Osborne, et al. · Materials and Manufacturing Processes · 61
Effects of Rotational Speed, Feed Rate and Tool Type on Temperatures and Cutting Forces When Drilling Bovine Cortical Bone
2013 · Josu Soriano, Ainhara Garay, et al. · Machining Science and Technology · 55
Machining Behaviour of Ti-6Al-4V and Ti-5553 All0oys in Interrupted Cutting with PVD Coated Cemented carbide
2012 · Asier Ugarte, Rachid M'Saoubi, et al. · Procedia CIRP · 48
PDF
Effect of cutting speed on the surface integrity of face milled 7050-T7451 aluminium workpieces
2018 · I. Perez, A. Madariaga, et al. · Procedia CIRP · 40
PDF
New calibration method to measure rake face temperature of the tool during dry orthogonal cutting using thermography
2018 · D. Soler, P.X. Aristimuño, et al. · Applied Thermal Engineering · 39
Heat transferred to the workpiece based on temperature measurements by IR technique in dry and lubricated drilling of Inconel 718
2016 · M. Cuesta, P. Aristimuño, et al. · Applied Thermal Engineering · 39
Influence of Tool Wear on Residual Stresses When Turning Inconel 718
2016 · A. Madariaga, A. Kortabarria, et al. · Procedia CIRP · 35
PDF
Study and improvement of surgical drill bit geometry for implant site preparation
2014 · Josu Soriano, Ainhara Garay, et al. · The International Journal of Advanced Manufacturing Technology · 35
Correlation between tool flank wear, force signals and surface integrity when turning bars of Inconel 718 in finishing conditions
2014 · P J. Arrazola, Ainhara Garay, et al. · International Journal of Machining and Machinability of Materials · 35
Effect of heat Treatment Conditions on the Machinability of Ti64 and Ti54M Alloys
2012 · Navneet Khanna, Ainhara Garay, et al. · Procedia CIRP · 35
PDF
Experimental and FEM analysis of surface integrity when broaching Ti64
2018 · G. Ortiz-de-Zarate, A. Madariaga, et al. · Procedia CIRP · 28
PDF
Physical modelling with experimental validation of high ductility metal cutting chip formation illustrated by copper machining
2021 · Thomas H.C. Childs, Pedro-J Arrazola, et al. · International Journal of Machine Tools and Manufacture · 21
PDF
A New Surgical Drill Bit Concept for Bone Drilling Operations
2013 · Josu Soriano, Ainhara Garay, et al. · Materials and Manufacturing Processes · 20
Methodology to establish a hybrid model for prediction of cutting forces and chip thickness in orthogonal cutting condition close to broaching
2018 · Gorka Ortiz-de-Zarate, Andres Sela, et al. · The International Journal of Advanced Manufacturing Technology · 19
Uncertainty of temperature measurements in dry orthogonal cutting of titanium alloys
2015 · Daniel Soler, Patxi Aristimuño, et al. · Infrared Physics & Technology · 17
Effect of surface integrity generated by machining on isothermal low cycle fatigue performance of Inconel 718
2022 · A. Madariaga, A. Garay, et al. · Engineering Failure Analysis · 16
PDF
Effect of Thermal Annealing on Machining-Induced Residual Stresses in Inconel 718
2017 · A. Madariaga, J. Aperribay, et al. · Journal of Materials Engineering and Performance · 13
Influence of oxygen content on the machinability of Ti-6Al-4V alloy
2016 · Irantzu Sacristan, Ainhara Garay, et al. · The International Journal of Advanced Manufacturing Technology · 13
Works count: 42
Citation count: 1,846
H-index: 20
I10-index: 28
Year
Topic
Type