Author

Behnam Davoodi

Observed names: B. Davoodi, B. davoodi, Davoodi, Behnam

Institution: Iran University of Science and Technology

Observed institutions: Islamic Azad University, Tehran, Tarbiat Modares University, Islamic Azad University, Science and Research Branch, Institut National des Sciences Appliquées de Rennes, University of Tabriz, Laboratoire de génie civil et génie mécanique, Iran University of Science and Technology, Shahid Rajaee Teacher Training University

ORCID: 0000-0001-7102-3291

Observed ORCID: 0000-0001-7102-3291

OpenAlex ID: A5083471628

Assessing the lubrication performance of vegetable oil-based nano-lubricants for environmentally conscious metal forming processes

2016 · Behrooz Zareh-Desari, Behnam Davoodi · Journal of Cleaner Production · 128

Experimental investigation and optimization of cutting parameters in dry and wet machining of aluminum alloy 5083 in order to remove cutting fluid

2014 · Behnam Davoodi, Ahmadreza Hosseini Tazehkandi · Journal of Cleaner Production · 122

Effects of reinforced nanoparticles with surfactant on surface quality and chip formation morphology in MQL-turning of superalloys

2019 · S.H. Musavi, B. Davoodi, et al. · Journal of Manufacturing Processes · 116

Tool wear mechanisms and multi-response optimization of tool life and volume of material removed in turning of N-155 iron–nickel-base superalloy using RSM

2015 · Behnam Davoodi, Behzad Eskandari · Measurement · 102

Experimental investigation on removing cutting fluid from turning of Inconel 725 with coated carbide tools

2014 · Ahmadreza Hosseini Tazehkandi, Farid Pilehvarian, et al. · Journal of Cleaner Production · 70

Environmental-friendly turning of A286 superalloy

2018 · Seyed Hasan Musavi, Behnam Davoodi, et al. · Journal of Manufacturing Processes · 66

Performance analysis of developed micro-textured cutting tool in machining aluminum alloy 7075-T6: assessment of tool wear and surface roughness

2022 · Seyed Hasan Musavi, Majid Sepehrikia, et al. · The International Journal of Advanced Manufacturing Technology · 62

Modeling and optimizing of cutting force and surface roughness in milling process of Inconel 738 using hybrid ANN and GA

2019 · Lila Imani, Ali Rahmani Henzaki, et al. · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · 60

Mechanical deburring and edge-finishing processes for aluminum parts—a review

2017 · Seyed Ali Niknam, Behnam Davoodi, et al. · The International Journal of Advanced Manufacturing Technology · 52

Cutting forces and surface roughness in wet machining of Inconel alloy 738 with coated carbide tool

2014 · Behnam Davoodi, Ahmadreza Hosseini Tazehkandi · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · 51

Assessment of forming parameters influencing spring-back in multi-point forming process: A comprehensive experimental and numerical study

2014 · Behnam Davoodi, Behrooz Zareh-Desari · Materials & Design (1980-2015) · 48

A new method for heat measurement during high speed machining

2012 · B. Davoodi, H. Hosseinzadeh · Measurement · 44

Assessment of tool wear and mechanical properties of Al 7075 nanocomposite in friction stir processing (FSP)

2019 · Navid Molla Ramezani, Behnam Davoodi, et al. · Journal of the Brazilian Society of Mechanical Sciences and Engineering · 39

Effects of reinforced nanofluid with nanoparticles on cutting tool wear morphology

2019 · Seyed Hasan Musavi, Behnam Davoodi, et al. · Journal of Central South University · 36

Multi-objective optimization of parameters in turning of N-155 iron-nickel-base superalloy using gray relational analysis

2018 · Behzad Eskandari, Behnam Davoodi, et al. · Journal of the Brazilian Society of Mechanical Sciences and Engineering · 30

Evaluation of surface roughness and optimization of cutting parameters in turning of AA2024 alloy under different cooling-lubrication conditions using RSM method

2020 · Seyed Hasan Musavi, Behnam Davoodi, et al. · Journal of Central South University · 29

Risk assessment for hazardous lubricants in machining industry

2020 · Seyed Hasan Musavi, Behnam Davoodi · Environmental Science and Pollution Research · 28

Investigation of deep drawing concept of multi-point forming process in terms of prevalent defects

2015 · Behrooz Zareh-Desari, Behnam Davoodi, et al. · International Journal of Material Forming · 24

Assessment of tool wear mechanisms in high-pressure jet-assisted turning process of a nickel-based superalloy

2020 · Gholamali Nasr, Mohammadreza Soltantarzeh, et al. · Wear · 23

Evaluating the influence of various friction stir processing strategies on surface integrity of hybrid nanocomposite Al6061

2024 · Navid Molla Ramezani, Behnam Davoodi · Scientific Reports · 21

PDF

Study of forming limit curves and mechanical properties of three-layered brass (CuZn10)/ low carbon steel (St14) /brass (CuZn10) composite considering the effect of annealing temperature

2022 · Mohammad Delshad Gholami, Behnam Davoodi, et al. · Journal of Materials Research and Technology · 21

Eco-green machining of superalloy A286: Assessment of tool wear morphology and surface topology

2021 · Seyed Hasan Musavi, Behnam Davoodi, et al. · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · 21

Investigation of microstructure evolution on the fracture toughness behaviour of brass/low carbon steel/brass clad sheets fabricated by cold roll bonding process

2023 · Mohammad Delshad Gholami, Ramin Hashemi, et al. · Journal of Materials Research and Technology · 20

An experimental and numerical analysis of the heat transfer problem in SHPB at elevated temperatures

2005 · Behnam Davoodi, Adinel Gavrus, et al. · Measurement Science and Technology · 19

PDF

Assessment of Tool Wear and Surface Integrity in Ductile Cutting Using a Developed Tool

2021 · Seyed Hasan Musavi, Behnam Davoodi, et al. · Arabian Journal for Science and Engineering · 17

Works count: 76

Citation count: 1,477

H-index: 21

I10-index: 32