Product
Help
Pricing
About
Jobs
Log in
Get started
Author
Add to collection
Mohd Asri Selamat
Observed names:
M. A. Selamat,
M.A. Selamat,
Mohd. Asri Selamat,
Selamat, M. A.
Institution:
Sirim Berhad
Observed institution:
Sirim Berhad
OpenAlex ID:
A5083951685
Friction and Wear Characteristics of WC and TiCN-coated Insert in Turning Carbon Steel Workpiece
2013
·
R.J. Talib
, A.M. Zaharah
, et al.
·
Procedia Engineering
·
24
Effect of Sintering Atmosphere on The Mechanical Properties of Sintered Tungsten Carbide
2017
·
Salina Budin
, Talib Ria Jaafar
, et al.
·
MATEC Web of Conferences
·
8
PDF
Sintering Effects on the Microstructure and Mechanical Properties of CoCrMo Alloy
2015
·
Mohd Hasnan Abdull Hamid
, Fazira Suriani Mohamed Fadzil
, et al.
·
Advanced materials research
·
8
Tool Wear in Machining AlSi/AlN Metal Matrix Composite 10 Wt% Reinforcement Using Uncoated Cutting Tool
2013
·
M.S. Said
, M.S. Yusoff
, et al.
·
Applied Mechanics and Materials
·
7
Comparison Study in Consolidation of Yttria Reinforced Iron-Chromium Composites Using Conventional and Microwave Sintering Technique
2013
·
M. Marina
, M.Z.M. Zamzuri
, et al.
·
Key engineering materials
·
7
Development and Characterisation of Pantograph Slides for Railway Applications: a Short Review
2023
·
Fazira Mohamed Fadzil
, Koay Mei Hyie
, et al.
·
Jurnal MEKANIKAL
·
5
PDF
Fabrication of Carbon-Copper Composites Using Local Carbon Material: Microstructure, Mechanical, Electrical and Wear Properties
2015
·
Mohd Asri Selamat
, Ahmad Aswad Mahaidin
, et al.
·
Advanced materials research
·
5
Surface Roughness and Chip Formation of AlSi/AIN Metal Matrix Composite by End Milling Machining using the Taguchi Method
2014
·
M. S. Said
, J. A. Ghani
, et al.
·
Jurnal Teknologi
·
5
Tool Wear and Surface Roughness when Machining AlSi/AlN Metal Matrix Composite Using Uncoated Carbide Cutting Tool
2013
·
M.S. Said
, J.A. Ghani
, et al.
·
Materials science forum
·
5
Effect of fabrication process on physical and mechanical properties of tungsten carbide - cobalt composite: A review
2017
·
Ahmad Aswad Mahaidin
, Talib Ria Jaafar
, et al.
·
AIP conference proceedings
·
4
Friction and Wear Characteristics of Cu-Based P/M Brake Friction Materials with Addition of Fe and C
2014
·
Talib Ria Jaafar
, Mohd Asri Selamat
, et al.
·
Applied Mechanics and Materials
·
4
Optimisation of End Milling Machining Parameters Using the Taguchi Method and ANOVA of AlSi/AlN Metal Matrix Composite Material
2016
·
Mohamad Sazali Said
, Jaharah A. Ghani
, et al.
·
Key engineering materials
·
3
Chip Formation in the Machining of Al-Si/10% AlN Metal Matrix Composite by using a TiN-coated Carbide Tool
2016
·
M.S. Said
, J.A. Ghani
, et al.
·
Research Journal of Applied Sciences Engineering and Technology
·
2
Optimization of Warm Compaction Process Parameters in Synthesizing Carbon-Copper Composite Using Taguchi Method
2016
·
Salina Budin
, Mohd Afiq Nurul Hadi
, et al.
·
Key engineering materials
·
2
Physical and Mechanical Properties of Warm Compacted Carbon-Copper Composite by Different Powder Formulation
2015
·
Mohd Afiq Nurul Hadi
, Mohd Asri Selamat
, et al.
·
Advanced materials research
·
2
Physical and Mechanical Properties of WC-Co Submicron Powders Using P/M Technique
2014
·
Ahmad Aswad Mahaidin
, Mohd Asri Selamat
, et al.
·
Advanced materials research
·
2
Supersolidus Sintering and Mechanical Properties of Water–Atomised M3/2 High–Speed Steel Powder Sintered Under Nitrogen–Based Atmosphere
2012
·
Mohd. Asri Selamat
, Mazlan Mohamad
·
Jurnal Teknologi
·
2
Adaptability of activated carbon from palm oil kernel shell in the development of brake friction materials
2017
·
R. J. Talib
, M. H. Amri
, et al.
·
AIP conference proceedings
·
1
Microstructure and mechanical properties of high speed steel with addition of ferrophosphorus on sintering temperature
2016
·
Salina Budin
, Talib Ria Jaafar
, et al.
·
AIP conference proceedings
·
1
PDF
A Study on Sintering Behavior and Mechanical Properties of High Speed Steel Powder Through Powder Metallurgy Route
2015
·
Samsiah Abdul Manaf
, Ahmad Aswad Mahaidin
, et al.
·
1
Mechanical Properties and Microstructures of WC-Co Cutting Tool Inserts with Addition of VC
2014
·
R.J. Talib
, A.A. Mahaidin
, et al.
·
Advanced materials research
·
1
Effect of VC and C Addition on Mechanical Properties and Microstructures of WC-Co Hardmetals Processed in Nitrogen-Based Atmosphere
2012
·
R. J. Talib
, A. A. Mahaidin
, et al.
·
Jurnal Teknologi
·
1
The Effect of Adding Carbon and Vanadium Carbide on Microstructure and Mechanical Properties of Ultra-Fine WC-Co Composite / Salina Budin...[et al.]
2018
·
Salina Budin
, Mei Hyie Koay
, et al.
·
UiTM Institutional Repositories (Universiti Teknologi MARA)
PDF
The Effect of Cobalt, Vanadium Carbide and PKS Activated Carbon Addition on WC-Co Composite: A Study using Taguchi Method / Ahmad Aswad Mahaidin ...[et al.]
2017
·
Ahmad Aswad Mahaidin
, Talib Ria Jaafar
, et al.
·
UiTM Institutional Repositories (Universiti Teknologi MARA)
PDF
Carbon-copper (C-Cu) composites using local carbon material through warm compaction process for potential electrical and electronic applications
2016
·
Ibrahim, M. H. I.
, Abdul Razak, M. I.
, et al.
·
UTHM Institutional Repository (Universiti Tun Hussein Onn Malaysia)
Show more works
View as search
Works count:
37
Citation count:
100
H-index:
5
I10-index:
1
Year
Topic
Type
