Get started
Author

Canser Gül

Observed names: Canser Gul, Canser Gül, Canser GÜL, Gül, Canser
ORCID: 0000-0002-1339-936X
Observed ORCID: 0000-0002-1339-936X
OpenAlex ID: A5085630329
Wear performance of Fe-Cr-C-B hardfacing coatings: Dry sand/rubber wheel test and ball-on-disc test
2018 · Hülya Durmuş, Nilay Çömez, et al. · International Journal of Refractory Metals and Hard Materials · 53
Fe-Cr-C-V hardfacing coatings with molybdenum addition: Wear, corrosion, and cavitation performances
2024 · Nilay Çömez, Melis Yurddaskal, et al. · Surface and Coatings Technology · 23
Characterization of Tantalum Oxide Sol–Gel-coated AZ91 Mg Alloys
2020 · Canser Gül, Sevda Albayrak, et al. · Transactions of the Indian Institute of Metals · 18
Electrochemical, mechanical, and antibacterial properties of the AZ91 Mg alloy by hybrid and layered hydroxyapatite and tantalum oxide sol–gel coating
2023 · Sevda Albayrak, Canser Gül, et al. · Materials Testing · 14
Improving the wear resistance of the magnesium alloy WE43 by cold sprayed Ni–Al 2 O 3 and Ni–Zn–Al 2 O 3 coatings
2023 · Serkan Gül, Hülya Durmuş, et al. · Materials Testing · 10
From metal chips to composite: Effect of age-hardening on mechanical and wear properties of Al2O3 reinforced AA7075 composites
2020 · Hülya Durmuş, Canser Gül, et al. · Science of Sintering · 10
PDF
Caracterización de la superficie de un recubrimiento EPD sobre la aleación de Mg AZ91 obtenida mediante Pulvimetalurgia
2020 · İbrahim Aydin, Ali İhsan Bahçepinar, et al. · Revista de Metalurgia · 9
PDF
Improvement in Corrosion Resistance of Tantalum Oxide and Tantalum Oxide with Diethanolamine Sol–Gel Coated Magnesium Alloys
2022 · Canser Gül, Sevda Albayrak, et al. · Protection of Metals and Physical Chemistry of Surfaces · 8
Effect of sandblasting and aging on structural and mechanical properties of Inconel 625 coated steels for marine applications
2025 · Hülya Durmuş, Nilay Çömez, et al. · Materials Testing · 7
WE43 Magnezyum Alaşımının Soğuk Sprey Kaplama Yöntemi ile Al/Zn/Al2O3 ve Zn/Al2O3 Kaplanması ve Aşınma Davranışlarının İncelenmesi
2022 · Canser GÜL, Sevda ALBAYRAK, et al. · Journal of Polytechnic · 7
PDF
Hydroxyapatite Ceramic-Polymer Composites for Biomedical Applications
2024 · Canser Gul, Sevda Albayrak · Composites science and technology · 6
Magnetron sıçratma ile Tantal-Oksit kaplama öncesi uygulanan alkali, alkali-asit ve kumlama yüzey işlemlerinin 7075 Alüminyum alaşımlarının aşınma davranışlarına etkileri
2022 · Canser GÜL, Sevda ALBAYRAK, et al. · Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi · 6
Reliability Analysis of Brinell Hardness Results for Aged Alumix321/SiC Composites
2019 · Canser Gül, Nilay Çömez, et al. · Transactions of the Indian Institute of Metals · 6
Tribological Characteristics of Tantalum-Oxide Coating Fabricated on Pre-Treated 2024 Aluminum Alloys
2023 · Sevda Albayrak, Canser Gül, et al. · Journal of Tribology · 5
Effect of boronizing parameters on mechanical and tribological characteristics of Monel K-500 super alloy
2025 · İlyas Türkmen, Canser Gül, et al. · Journal of Alloys and Compounds · 4
Ceramic Coatings for Biomedical Applications
2024 · Sevda Albayrak, Canser Gul · Composites science and technology · 4
Contact angle studies of nanoscale polymer based coatings
2023 · Sevda Albayrak, Canser Gül · Elsevier eBooks · 4
Wear and corrosion resistance of zinc-oxide and zirconium-oxide coated WE43 magnesium alloy
2023 · Canser Gül, Hülya Durmuş, et al. · Journal of Vacuum Science & Technology A Vacuum Surfaces and Films · 3
Ti6Al4V Alaşımı Üzerine Sol-Jel Yöntemi ile Yapılan Hidroksiapatit Kaplamalarda Oksalik Asitin Korozyon Dayanımına Etkisi
2020 · Canser GÜL, Serhat MUTAF, et al. · Journal of Polytechnic · 3
PDF
Investigación sobre el comportamiento al desgaste de los compuestos Alumix321/SiC envejecidos y fabricados por prensado en caliente
2019 · Hülya Durmuş, Canser Gül, et al. · Revista de Metalurgia · 3
PDF
FARKLI MENEVİŞLEME SICAKLIKLARININ 51CrV4 ÇELİĞİNİN MEKANİK ÖZELLİKLERİNE ETKİLERİNİN İNCELENMESİ
2020 · Hülya DURMUŞ, Fatma ÇAKIR, et al. · Gazi Üniversitesi Fen Bilimleri Dergisi Part C Tasarım ve Teknoloji · 2
Ferromolibden ve ferrobor takviyeli lazer kaplamaların aşınma karakteristiği ve mikroyapısı
2019 · Hülya Durmuş, Nilay ÇÖMEZ, et al. · DÜMF Mühendislik Dergisi · 2
Effect of Pre-existing T6 Precipitates on the Recrystallization Texture, Dislocation Structure, and Corrosion Behavior of Cold-Rolled AA 6061 Alloy
2026 · Sevda Albayrak, Shanli Salahi, et al. · Metals and Materials International · 1
Influence of coating thickness on wear and corrosion resistance of suspension plasma sprayed zirconium oxide coatings on a ZK60 magnesium alloy
2026 · Canser Gül, Sevda Albayrak, et al. · Materials Testing · 1
Alüminyum Alaşımlarına Uygulanan Alüminyum Oksit Takviyeli Alüminyum/Çinko Soğuk Sprey Kaplamaların Morfoloji ve Aşınma Dayanımına Etkisi
2025 · Rüveyda Şenel, Rüştü Alper Taştekin, et al. · Journal of Polytechnic · 1
PDF
Works count: 45
Citation count: 213
H-index: 8
I10-index: 6
Year
Topic
Type