Author

Danyang Zhao

Observed names: D Zhao, D.Y. Zhao, Dan-Yang Zhao

Institution: China Railway Group (China)

Observed institutions: Georgia Institute of Technology, University of Waterloo, Harbin Institute of Technology, China University of Mining and Technology, Dalian University of Technology, Agro-Environmental Protection Institute, China Railway Group (China), Guangdong Academy of Forestry, Ministry of Agriculture and Rural Affairs, Inner Mongolia Medical University, Southeast University

ORCID: 0000-0002-9220-9770

Observed ORCID: 0000-0002-9220-9770

OpenAlex ID: A5085658072

Super-robust superhydrophobic concrete

2017 · Jinlong Song, Danyang Zhao, et al. · Journal of Materials Chemistry A · 247

PDF

Research on effects of injection process parameters on the molding process for ultra-thin wall plastic parts

2007 · M.C. Song, Z. Liu, et al. · Journal of Materials Processing Technology · 98

Vacuum casting replication of micro-riblets on shark skin for drag-reducing applications

2011 · Dan-Yang Zhao, Zhi-Ping Huang, et al. · Journal of Materials Processing Technology · 92

A superhydrophilic cement-coated mesh: an acid, alkali, and organic reagent-free material for oil/water separation

2017 · Jinlong Song, Shude Li, et al. · Nanoscale · 85

PDF

Modeling and Separation of Thermal Effects from Cable-Stayed Bridge Response

2019 · Xiang Xu, Qiao Huang, et al. · Journal of Bridge Engineering · 82

Droplet impact on cross-scale cylindrical superhydrophobic surfaces

2018 · Chunfang Guo, Jianxing Sun, et al. · Applied Physics Letters · 74

Fluid Bath-Assisted 3D Printing for Biomedical Applications: From Pre- to Postprinting Stages

2021 · Weijian Hua, Kellen Mitchell, et al. · ACS Biomaterials Science & Engineering · 72

Anisotropic sliding on dual-rail hydrophilic tracks

2017 · Xiaolong Yang, Jinlong Song, et al. · Lab on a Chip · 69

Study of extrudability and standoff distance effect during nanoclay-enabled direct printing

2018 · Yifei Jin, Danyang Zhao, et al. · Bio-Design and Manufacturing · 62

Heat transfer to bouncing droplets on superhydrophobic surfaces

2019 · Chunfang Guo, Daniel Maynes, et al. · International Journal of Heat and Mass Transfer · 59

PDF

Wire electrochemical etching of superhydrophobic 304 stainless steel surfaces based on high local current density with neutral electrolyte

2021 · Yankui Sun, Jiyu Liu, et al. · Applied Surface Science · 52

Electrochemical 3D printing of superhydrophobic pillars with conical, cylindrical, and inverted conical shapes

2021 · Defeng Yan, Yuhui Wang, et al. · Colloids and Surfaces A Physicochemical and Engineering Aspects · 52

Design optimization of stent and its dilatation balloon using kriging surrogate model

2017 · Hongxia Li, Tao Liu, et al. · BioMedical Engineering OnLine · 52

PDF

3D Printing of Biodegradable Polymer Vascular Stents: A Review

2022 · Weijian Hua, Weiliang Shi, et al. · Chinese Journal of Mechanical Engineering Additive Manufacturing Frontiers · 51

PDF

Droplet motion on superhydrophobic/superhydrophilic wedge-shaped patterned surfaces with different micro-morphologies

2022 · Jinming Liu, Defeng Yan, et al. · Colloids and Surfaces A Physicochemical and Engineering Aspects · 50

Experimental study of polymeric stent fabrication using homemade 3D printing system

2019 · Danyang Zhao, Ruiqi Zhou, et al. · Polymer Engineering and Science · 50

Study on the Hydrophobic Property of Shark-Skin-Inspired Micro-Riblets

2014 · Danyang Zhao, Qianqian Tian, et al. · Journal of Bionic Engineering · 46

Structural Design of Mechanical Property for Biodegradable Polymeric Stent

2019 · Yunbo Wei, Minjie Wang, et al. · Advances in Materials Science and Engineering · 43

PDF

Through-mask electrochemical micromachining of micro pillar arrays on aluminum

2020 · Yankui Sun, Siying Ling, et al. · Surface and Coatings Technology · 41

Advances in friction of aluminium alloy deep drawing

2023 · Yiren Gao, Hongxia Li, et al. · Friction · 38

PDF

Study on extrudate swell of polypropylene in double-lumen micro profile extrusion

2015 · Huiqing Tian, Danyang Zhao, et al. · Journal of Materials Processing Technology · 37

Design and experiments of extrusion die for polypropylene five-lumen micro tube

2013 · Guo-Bao Jin, Min-Jie Wang, et al. · Journal of Materials Processing Technology · 37

Multi-Objective Optimizations of Biodegradable Polymer Stent Structure and Stent Microinjection Molding Process

2017 · Hongxia Li, Xinyu Wang, et al. · Polymers · 35

PDF

Multi-Objective Optimizations for Microinjection Molding Process Parameters of Biodegradable Polymer Stent

2018 · Hongxia Li, Kui Liu, et al. · Materials · 33

PDF

Multi-objective optimization of coronary stent using Kriging surrogate model

2016 · Hongxia Li, Junfeng Gu, et al. · BioMedical Engineering OnLine · 33

PDF

Works count: 106

Citation count: 2,544

H-index: 29

I10-index: 70