Get started
Author

Andrius Žemaitis

Observed names: A. Žemaitis, Zemaitis, Andrius, Žemaitis, Andrius, Žemaitis, Andrius,
ORCID: 0000-0001-6479-9016
Observed ORCID: 0000-0001-6479-9016
OpenAlex ID: A5085863492
Advanced laser scanning for highly-efficient ablation and ultrafast surface structuring: experiment and model
2018 · Andrius Žemaitis, Mantas Gaidys, et al. · Scientific Reports · 172
PDF
Highly-efficient laser ablation of copper by bursts of ultrashort tuneable (fs-ps) pulses
2019 · Andrius Žemaitis, Paulius Gečys, et al. · Scientific Reports · 106
PDF
Femtosecond laser ablation by bibursts in the MHz and GHz pulse repetition rates
2021 · Andrius Žemaitis, Mantas Gaidys, et al. · Optics Express · 95
Controlling the wettability of stainless steel from highly-hydrophilic to super-hydrophobic by femtosecond laser-induced ripples and nanospikes
2020 · Andrius Žemaitis, Alexandros Mimidis, et al. · RSC Advances · 74
PDF
Rapid high-quality 3D micro-machining by optimised efficient ultrashort laser ablation
2018 · Andrius Žemaitis, Mantas Gaidys, et al. · Optics and Lasers in Engineering · 67
High-efficiency laser fabrication of drag reducing riblet surfaces on pre-heated Teflon
2019 · Andrius Žemaitis, Justinas Mikšys, et al. · Materials Research Express · 29
PDF
Efficient picosecond laser ablation of copper cylinders
2019 · M. Gaidys, A. Žemaitis, et al. · Applied Surface Science · 27
Efficient surface polishing using burst and biburst mode ultrafast laser irradiation
2023 · Mantas Gaidys, Andrius Žemaitis, et al. · RSC Advances · 26
PDF
The ultrafast burst laser ablation of metals: Speed and quality come together
2024 · Andrius Žemaitis, Ugnė Gudauskytė, et al. · Optics & Laser Technology · 21
Bi-stability in femtosecond laser ablation by MHz bursts
2024 · Andrius Žemaitis, Mantas Gaidys, et al. · Scientific Reports · 18
PDF
Efficient ablation by ultra-short pulse lasers
2020 · Andrius Žemaitis, Paulius Gečys, et al. · Procedia CIRP · 18
PDF
Validation of monolithic interconnection conductivity in laser scribed CIGS thin-film solar cells
2015 · E. Markauskas, P. Gečys, et al. · Solar Energy · 16
Variation of P2 series interconnects electrical conductivity in the CIGS solar cells by picosecond laser-induced modification
2016 · P. Gečys, E. Markauskas, et al. · Solar Energy · 15
High throughput and low surface roughness laser layer-by-layer milling using nanosecond (ns), picosecond (ps), and hybrid ns-ps pulses: A comparative study
2024 · Andrius Žemaitis, Paulius Gečys, et al. · Optics and Lasers in Engineering · 14
Efficient Ablation, further GHz Burst Polishing, and Surface Texturing by Ultrafast Laser
2024 · Andrius Žemaitis, Paulius Gečys, et al. · Advanced Engineering Materials · 11
Efficient Ablation, further GHz Burst Polishing, and Surface Texturing by Ultrafast Laser
2024 · Andrius Žemaitis, Paulius Gečys, et al. · Advanced Engineering Materials · 3
Efficient laser ablation for bio-inspired 3D functional surfaces
2022 · Andrius Žemaitis · 3
Ultrafast laser ablation by bi-bursts in MHz and GHz pulse repetition rate
2021 · Andrius Žemaitis, Mantas Gaidys, et al. · Laser applications in microelectronic and optoelectronic manufacturing. Conference · 2
Wettability Change of Copper by Controlling Area Fraction of Laser-Ablated Surface
2026 · Mantas Gaidys, Stella Maragkaki, et al. · Applied Sciences · 1
Functional surface formation by efficient laser ablation using single-pulse and burst-modes
2021 · Andrius Žemaitis, Mantas Gaidys, et al. · Laser applications in microelectronic and optoelectronic manufacturing. Conference · 1
PDF
Efficient Picosecond Laser Lift-Off of Copper Oxide from Copper: Optimal Fluence and Focusing Conditions for Maximum Delamination Area
2026 · Andrius Žemaitis, Paulius Gečys, et al. · Applied Sciences
PDF
Femtosecond GHz bursts for surface laser polishing
2025 · Andrius Žemaitis, Saulė Steponavičiūtė, et al. · Laser-based Micro- and Nanoprocessing
Nonlinear and saturable absorption influence on laser ablation threshold of copper in z-scan experiments
2021 · Andrius Žemaitis, Mantas Gaidys, et al. · arXiv (Cornell University)
High-efficiency laser milling by bursts of ultrashort (fs-ps) light pulses (Conference Presentation)
2020 · Andrius Žemaitis, Paulius Gečys, et al. · Laser applications in microelectronic and optoelectronic manufacturing. Conference
The Executive competencies Lithuanian army.
2017 · Žemaitis, Andrius, · General Jonas Žemaitis Military Academy of Lithuania
Works count: 28
Citation count: 719
H-index: 14
I10-index: 15
Year
Topic
Type