Author

K. W. Bills

Observed names: Bills,Kenneth W , Jr, K. BILLS, K. BILLS, JR., K. W. BILLS, K.W. BILLS, JR., K.W. Bills, KENNETH W. BILLS, Kenneth W. Bills

OpenAlex ID: A5086416322

A model describing combustion of solid composite propellants containing ammonium nitrate

1959 · W.H. Andersen, K.W. Bills, et al. · Combustion and Flame · 76

Improved Instrument for the Measurement of Linear Pyrolysis Rates of Solids

1958 · M. K. Barsh, W. H. Andersen, et al. · Review of Scientific Instruments · 30

The tensile properties of highly filled polymers. Effect of filler concentrations

1960 · Kenneth W. Bills, Keith H. Sweeny, et al. · Journal of Applied Polymer Science · 29

Relation of Mechanical Properties to Solid Rocket Motor Failure

1963 · KENNETH W. BILLS, JAMES H. WIEGAND · AIAA Journal · 22

A cumulative-damage concept for propellant- liner bonds in solid rocket motors.

1966 · K. W. BILLS, G. J. SVOB, et al. · Journal of Spacecraft and Rockets · 12

The Swelling of Unfilled and Highly Filled Polymers

1961 · K. W. Bills, F. S. Salcedo · Journal of Applied Physics · 12

Predictive surveillance technique for air-launched rocket motors

1984 · G. J. Svob, K.W. Bills · Journal of Spacecraft and Rockets · 10

Handbook, Structural Design Nomograph for Thermal Cycling of Tactical Rocket Propellants.

1977 · K. W. Bills, Jr · Defense Technical Information Center (DTIC) · 8

The Application of an Integrated Structural Analysis to the Prediction of Reliability

1970 · K. W. Bills, J. H. Wiegand · SAE technical papers on CD-ROM/SAE technical paper series · 7

Relation of Mechanical Properties to Solid Rocket Motor Failure

1964 · Kenneth W. Bills, James H. Wiegand · Rubber Chemistry and Technology · 4

Errata-Predictive Surveillance Technique for Air-Launched Rocket Motors

1984 · G.J. Svob, K.W. Bills · Journal of Spacecraft and Rockets · 3

Design and Test of the Operational In-Situ Gage for Solid Propellant Surveillance.

1976 · HERMAN P. BRIAR, K. W. Bills, et al. · Defense Technical Information Center (DTIC) · 3

Modified maximum principal stress criterion for propellant liner bond failures

1987 · T. L. Kuhlmann, R. L. Peeters, et al. · Journal of Propulsion and Power · 2

Solid Propellant Cumulative Damage Program.

1968 · K. W. Bills, Robert C. Sampson, et al. · Defense Technical Information Center (DTIC) · 2

Modified maximum principal stress failure criterion applied to propellant-liner bond failures

1985 · T. KUHLMANN, R. PEETERS, et al. · AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit · 1

Propellant-Liner Bond Test Improvement Program,

1984 · Thomas Kuhlmann, K. W. Bills, et al. · 1

Selection and demonstration of advanced nondestructive testing techniques for on-site missile inspection. Volume I. Technical report. Final report, 15 May 1972--14 September 1973

1973 · HERMAN P. BRIAR, K. W. Bills, et al. · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · 1

A cumulative-damage concept for propellant- liner bonds and its application to solid rocket motors

1965 · K. BILLS, T. ERIKSSON · AIAA Solid Propellant Rocket Conference · 1

The Swelling of Unfilled and Highly Filled Polymers

1962 · K. W. Bills, F. S. Salcedo · Rubber Chemistry and Technology · 1

An objective determination of the time-temperature shift relation for solid propellants

1983 · K. BILLS, JR. · AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit

A predictive surveillance technique for air-launched motors

1982 · G. SVOB, K.W. BILLS, JR. · AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit

Liner Technology Program. Volume 1. Fracture Energy Method Development

1982 · K. W. Bills, R. A. Schapery · Defense Technical Information Center (DTIC)

Development of the scarf-joint test for the measurement of bond fracture energy

1981 · K. BILLS, JR. · AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit

Flexible Case - Grain Interaction in Ballistic Weapon Systems. Volume I. Technical Accomplishments.

1976 · K. W. Bills, Samuel W Jang, et al. · Defense Technical Information Center (DTIC)

Flexible Case-Grain Interaction in Ballistic Weapon Systems. Volume II. Solid Propellant Grain Instrumentation System Design and Application.

1976 · Leeming,Harold, Bills,Kenneth W , Jr, et al. · Defense Technical Information Center (DTIC)

Works count: 27

Citation count: 225

H-index: 8

I10-index: 7