Get started
Author

Maximilian Passmann

ORCID: 0000-0002-2403-6353
Observed ORCID: 0000-0002-2403-6353
OpenAlex ID: A5087117261
Interactions Between Flow Fields Induced by Surface Dielectric Barrier Discharge Arrays
2023 · Alexander Böddecker, Maximilian Passmann, et al. · Plasma Chemistry and Plasma Processing · 19
PDF
Focusing Schlieren Visualization of Transonic Turbine Tip-Leakage Flows
2020 · Maximilian Passmann, Stefan aus der Wiesche, et al. · International Journal of Turbomachinery Propulsion and Power · 19
An Experimental and Numerical Study of Tip-Leakage Flows in an Idealized Turbine Tip Gap at High Mach Numbers
2018 · Maximilian Passmann, Stefan aus der Wiesche, et al. · ASME Turbo Expo: Turbomachinery Technical Conference and Exposition (GT) · 12
Effect of Reynolds Number on Five-Hole Probe Performance: Experimental Study of the Open-Access Oxford Probe
2021 · Maximilian Passmann, Stefan aus der Wiesche, et al. · Journal of Turbomachinery · 11
PDF
A one-dimensional analytical calculation method for obtaining normal shock losses in supersonic real gas flows
2017 · Maximilian Passmann, Stefan aus der Wiesche, et al. · Journal of Physics Conference Series · 10
PDF
The role of flow field dynamics in enhancing volatile organic compound conversion in a surface dielectric barrier discharge system
2024 · Alexander Böddecker, Maximilian Passmann, et al. · Journal of Physics D Applied Physics · 8
Flow in Pillow-Plate Channels for High-Speed Turbomachinery Heat Exchangers
2022 · Stephan Sundermeier, Maximilian Passmann, et al. · International Journal of Turbomachinery Propulsion and Power · 5
PDF
Numerical Calibration of Three-Dimensional Printed Five-Hole Probes for the Transonic Flow Regime
2021 · Maximilian Passmann, Stefan aus der Wiesche, et al. · Journal of Fluids Engineering · 5
Development and Design of a Two-Stage Contraction Zone and Test Section of an Organic Rankine Cycle Wind Tunnel
2016 · Maximilian Passmann, Felix Reinker, et al. · ASME Turbo Expo: Turbomachinery Technical Conference and Exposition (GT) · 5
Development and Commissioning of a Supersonic Blow Down Wind Tunnel for Educational Purposes
2017 · Maximilian Passmann, Stefan aus der Wiesche · 4
Investigation of a Transonic Dense Gas Flow Over an Idealized Blade Vane Configuration
2024 · Leander Hake, Stefan aus der Wiesche, et al. · ASME Turbo Expo: Turbomachinery Technical Conference and Exposition (GT) · 3
Effect of Reynolds Number on Five-Hole Probe Performance: Experimental Study of the Open-Access Oxford Probe
2020 · Maximilian Passmann, Stefan aus der Wiesche, et al. · ASME Turbo Expo: Turbomachinery Technical Conference and Exposition (GT) · 3
On the Low and High Speed Flow of Gases Through Pillow Plate Channels
2019 · Maximilian Passmann, Stefan aus der Wiesche, et al. · ASME-JSME-KSME Joint Fluids Engineering Conference (AJKFluids) · 3
Numerical Calibration of 3D Printed Five-Hole Probes for the Transonic Flow Regime
2019 · Maximilian Passmann, Stefan aus der Wiesche, et al. · ASME-JSME-KSME Joint Fluids Engineering Conference (AJKFluids) · 3
Analysis of Steam Turbine Blade Tip Excitation Forces by Means of Computational Fluid Dynamics and Experimental Cascade Results
2018 · Stefan aus der Wiesche, Maximilian Passmann · ASME Turbo Expo: Turbomachinery Technical Conference and Exposition (GT) · 3
Reduction of Turbine Blade Tip Leakage Losses and Excitation Forces by Passive Tip Injection
2015 · Stefan aus der Wiesche, Maximilian Passmann, et al. · ASME International Mechanical Engineering Congress and Exposition (IMECE) · 1
The calibration of five-hole probes for use in low-Reynolds number flows
2026 · Jonas Stürznickel, Romuald Skoda, et al. · Experiments in Fluids
PDF
Investigation of a Transonic Dense Gas Flow Over an Idealized Blade Vane Configuration
2025 · Leander Hake, Stefan aus der Wiesche, et al. · Journal of Turbomachinery
Calibration of multi-hole probes for measurements in compressible organic vapor flows
2024 · Leander Hake, Stephan Sundermeier, et al. · Editorial Universidad de Sevilla eBooks
PDF
The Physical Mechanism of Tip Leakage Loss Reduction by Means of Passive Injection in Low Mach Number Flows
2018 · Maximilian Passmann, Stefan aus der Wiesche, et al. · ASME Turbo Expo: Turbomachinery Technical Conference and Exposition (GT)
A Detailed Experimental and Numerical Investigation of Flow Structures in a Turbine Tip Gap With Passive Injection
2017 · Maximilian Passmann, Stefan aus der Wiesche
Measurements and Visualization of the Flow in a Turbine Blade Tip Gap With Passive Jet Injection
2016 · Maximilian Passmann, Karsten Hasselmann, et al. · ASME International Mechanical Engineering Congress and Exposition (IMECE)
Profile and Mixing Losses of a Turbine Cascade Under the Condition of Low Reynolds Number Flows
2016 · Jonas Rejek, Maximilian Passmann, et al.
Works count: 23
Citation count: 114
H-index: 6
I10-index: 5
Year
Topic
Type