Get started
Author

Michael Storchak

Observed names: M. G Storchak, M. Storchak, M. Stortchak, Michael G. Storchak, Michael Stortchak, Storchak, Michael, М. Г. Сторчак, Сторчак, М. Г.
Observed institutions: University of Stuttgart, National Academy of Sciences of Ukraine, Industrial University of Tyumen, Zhytomyr Polytechnic State University, V. Bakul Institute for Superhard Materials, National University "Kyiv Aviation Institute"
ORCID: 0000-0002-6603-1710
Observed ORCID: 0000-0002-6603-1710
OpenAlex ID: A5088837772
Determination of Johnson–Cook Constitutive Parameters for Cutting Simulations
2019 · Michael Storchak, Philipp Rupp, et al. · Metals · 53
PDF
Temperature calculation in cutting zones
2018 · Hans-Christian Möhring, Valerii Kushner, et al. · CIRP Annals · 44
Coatings strength evaluation of cutting inserts using advanced multi-pass scratch method
2022 · Michael Storchak, Islam Zakiev, et al. · Measurement · 38
Improving the friction model for the simulation of cutting processes
2021 · Michael Storchak, Hans-Christian Möhring, et al. · Tribology International · 38
Instrumented indentation study of materials edge chipping
2021 · Islam Zakiev, Michael Storchak, et al. · Ceramics International · 35
Determination of the Tool–Chip Contact Length for the Cutting Processes
2022 · Michael Storchak, Konstantin Drewle, et al. · Materials · 34
PDF
Modelling the material resistance to cutting
2017 · Valerii Kushner, Michael Storchak · International Journal of Mechanical Sciences · 33
Glass Fracture during Micro-Scratching
2020 · Islam Zakiev, George A. Gogotsi, et al. · Surfaces · 32
PDF
Mechanical properties of subsurface layers in the machining of the titanium alloy Ti10V2Fe3Al
2018 · Michael Storchak, Islam Zakiev, et al. · Journal of Mechanical Science and Technology · 30
Physico-mechanical and Tribological Properties of Fe-Cu-Ni-Sn and Fe-Cu-Ni-Sn-VN Nanocomposites Obtained by Powder Metallurgy Methods
2019 · V.A. Mechnik, N.A. Bondarenko, et al. · Tribology in Industry · 29
Modelling of orthogonal cutting processes with the method of smoothed particle hydrodynamics
2013 · Uwe Heisel, Wiliam Zaloga, et al. · Production Engineering · 29
Assessment of surface roughness and reflectance of nonmetallic products upon diamond abrasive finishing
2009 · Yu. D. Filatov, V. P. Yashchuk, et al. · Journal of Superhard Materials · 29
PDF
Bound-abrasive grinding and polishing of surfaces of optical materials
2011 · Yuriy D. Filatov, Oleksandr Y. Filatov, et al. · Optical Engineering · 27
Surface roughness in diamond abrasive finishing
2009 · Yu. D. Filatov, V. I. Sidorko, et al. · Journal of Superhard Materials · 27
Surface quality control in diamond abrasive finishing
2009 · Yuriy D. Filatov, Volodymyr I. Sidorko, et al. · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · 27
The influence of tool wear particles scattering in the contact zone on the workpiece surface microprofile formation in polishing quartz
2010 · Yu. D. Filatov, A. Yu. Filatov, et al. · Journal of Superhard Materials · 26
PDF
Refinement of temperature determination in cutting zones
2021 · Michael Storchak, Valerii Kushner, et al. · Journal of Mechanical Science and Technology · 25
In situ control of roughness of processed surfaces by reflectometric method
2010 · Yuriy D. Filatov, Oleksandr Y. Filatov, et al. · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · 25
Thermal effects in orthogonal cutting
2013 · Uwe Heisel, Michael Storchak, et al. · Production Engineering · 24
Effect of machining conditions on specific tangential forces
2012 · Uwe Heisel, Valerii Kushner, et al. · Production Engineering · 24
Determination of thermal material properties for the numerical simulation of cutting processes
2021 · Michael Storchak, Thomas Stehle, et al. · The International Journal of Advanced Manufacturing Technology · 23
PDF
Synthesis of cylindrical gears with optimum rolling fatigue strength
2014 · Dmitry Babichev, Michael Storchak · Production Engineering · 23
Experimental studies for verification of thermal effects in cutting
2011 · Uwe Heisel, Michael Storchak, et al. · Production Engineering · 23
Bound-abrasive grinding and polishing of surfaces of optical materials
2010 · Yuriy D. Filatov, Olexandr Y. Filatov, et al. · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · 23
Development of analytical model for orthogonal cutting
2014 · Ju. Tsekhanov, M. Storchak · Production Engineering · 22
Works count: 89
Citation count: 1,026
H-index: 23
I10-index: 34
Year
Topic
Type