Get started
Author

Nagahanumaiah Nagahanumaiah

Computer aided rapid tooling process selection and manufacturability evaluation for injection mold development
2007 · Nagahanumaiah, K. Subburaj, et al. · Computers in Industry · 88
DMSA-Functionalized Gold Nanorod on Paper for Colorimetric Detection and Estimation of Arsenic (III and V) Contamination in Groundwater
2018 · Nivedita Priyadarshni, Peuli Nath, et al. · ACS Sustainable Chemistry & Engineering · 85
Sustainable removal of arsenate, arsenite and bacterial contamination from water using biochar stabilized iron and copper oxide nanoparticles and associated mechanism of the remediation process
2020 · Nivedita Priyadarshni, Peuli Nath, et al. · Journal of Water Process Engineering · 78
Characterization of plasma in micro-EDM discharge using optical spectroscopy
2009 · Nagahanumaiah, Janakarajan Ramkumar, et al. · Journal of Manufacturing Processes · 47
Investigation on bacterial adhesion and colonisation resistance over laser‐machined micro patterned surfaces
2013 · Aneissha Chebolu, Bhakti Laha, et al. · Micro & Nano Letters · 38
Optimization of EDM machining parameters using DMLS electrode
2006 · Vijay Kumar Meena, Nagahanumaiah · Rapid Prototyping Journal · 38
Pulse Electrocodeposited Ni–WC Composite Coating
2015 · R. N. Gupta, A. K. Das, et al. · Materials and Manufacturing Processes · 34
Rapid tooling manufacturability evaluation using fuzzy-AHP methodology
2006 · Nagahanumaiah, B. Ravi, et al. · International Journal of Production Research · 31
Effects of injection molding parameters on shrinkage and weight of plastic part produced by DMLS mold
2009 · Nagahanumaiah, B. Ravi · Rapid Prototyping Journal · 29
Comparative Assessment of the Laser Induced Plasma Micromachining and the Micro-EDM Processes
2013 · K. Pallav, P. Han, et al. · Journal of Manufacturing Science and Engineering · 27
Effects of Different Cavity Geometries on Machining Performance in Micro-Electrical Discharge Milling
2014 · Shrikant Vidya, Vijay, et al. · Journal of Micro and Nano-Manufacturing · 23
PDF
Tool–workpiece contact detection in micro-milling using wireless-aided accelerometer sensor
2015 · Sritama Roy, Soumen Mandal, et al. · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · 22
Fabrication of hydrophobic surfaces on Titanium using Micro-EDM exhibiting antibacterial properties
2021 · Arjita Das, Shikha Ambastha, et al. · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · 21
Surface Texture and Elemental Characterization of High Aspect Ratio Blind Micro Holes on Different Materials in Micro EDM
2014 · Swapan Barman, Vijay, et al. · Procedia Materials Science · 17
PDF
A novel approach to fabricate dye-encapsulated polymeric micro- and nanoparticles by thin film dewetting technique
2017 · Manosree Chatterjee, Abhiram Hens, et al. · Journal of Colloid and Interface Science · 16
Silver Nanoparticles in Comparison with Ionic Liquid and rGO as Gate Dopant for Paper–Pencil-Based Flexible Field-Effect Transistors
2014 · Soumen Mandal, Ravi Kumar Arun, et al. · Journal of Electronic Materials · 15
Molecular Dynamics Simulation Study of Neck Growth in Micro-selective Laser Sintering of Copper Nanoparticles
2018 · Srijan Paul, Nagahanumaiah, et al. · Lecture notes on multidisciplinary industrial engineering · 14
Investigation on Cutting Forces and Surface Finish in Mechanical Micro Milling of Zr-Based Bulk Metallic Glass
2018 · Debajyoti Ray, Asit Baran Puri, et al. · Journal of Advanced Manufacturing Systems · 12
20.6: Design and development of 100 GHz folded waveguide TWT
2010 · Rajendra Kumar Sharma, Arun Kumar Sharma, et al. · IEEE International Vacuum Electronics Conference (IVEC) · 12
A Study of Optimization of Various Parameters in the Fabrication of Screen-Printed Electrodes
2018 · Keya Layek, Nagahanumaiah, et al. · IEEE Sensors Journal · 11
A study on wafer scalable, industrially applicable CNT based nanocomposites of Al-CNT, Cu-CNT, Ti-CNT, and Ni-CNT as thermal interface materials synthesised by thin film techniques
2021 · Ankit Krishna, L.S. Aravinda, et al. · Surface and Coatings Technology · 10
Modelling of Cutting Force and Deflection of Medical Needles with Different Tip Geometries
2014 · Aneissha Chebolu, Amarnadh Mallimoggala, et al. · Procedia Materials Science · 10
PDF
Assessment of micro turning machine stiffness response and material characteristics by fuzzy rule based pattern matching of cutting force plots
2012 · Soumen Mandal, Anirudh Kumar, et al. · Journal of Manufacturing Systems · 10
Separation of particles in spiral micro-channel using Dean’s flow fractionation
2020 · Puja Mitra, Samik Dutta, et al. · Journal of the Brazilian Society of Mechanical Sciences and Engineering · 8
A Novel Methodology for Spark Gap Monitoring in Micro-EDM Using Optical Fiber Bragg Grating
2019 · Arjita Das, Shikha Ambastha, et al. · IEEE Transactions on Instrumentation and Measurement · 7
Works count: 55
Citation count: 772
H-index: 15
I10-index: 23
Year
Topic
Type