Get started
Author

P. Aristimuño

Observed names: Aristimuno, P., Aristimuño, Patxi, P Aristimuno, P X Aristimuño, P. Aristimuno, P. Aristimuño, P.X. Aristimuno, P.X. Aristimuño, Patxi Aristimuno, Patxi Aristimuño, Patxi Aristimuño Osoro, Patxi X. Aristimuño, Patxi X. Aristimuño Osoro, Patxi Xabier Aristimuño, Patxi-X. Aristimuño
Observed institution: Mondragon Unibertsitatea
ORCID: 0000-0002-2640-4287
Observed ORCID: 0000-0002-2640-4287
OpenAlex ID: A5089317061
Determining tool/chip temperatures from thermography measurements in metal cutting
2018 · M. Saez-de-Buruaga, D. Soler, et al. · Applied Thermal Engineering · 86
PDF
Metal cutting experiments and modelling for improved determination of chip/tool contact temperature by infrared thermography
2015 · Pedro-J. Arrazola, Patxi Aristimuno, et al. · CIRP Annals · 80
Ti6Al4V metal cutting chip formation experiments and modelling over a wide range of cutting speeds
2018 · Thomas H.C. Childs, Pedro-J. Arrazola, et al. · Journal of Materials Processing Technology · 65
Effects of Rotational Speed, Feed Rate and Tool Type on Temperatures and Cutting Forces When Drilling Bovine Cortical Bone
2013 · Josu Soriano, Ainhara Garay, et al. · Machining Science and Technology · 55
Exploring the effectiveness of using internal CNC system signals for chatter detection in milling process
2022 · Xiaochen Zheng, Pedro Arrazola, et al. · Mechanical Systems and Signal Processing · 54
New calibration method to measure rake face temperature of the tool during dry orthogonal cutting using thermography
2018 · D. Soler, P.X. Aristimuño, et al. · Applied Thermal Engineering · 39
Heat transferred to the workpiece based on temperature measurements by IR technique in dry and lubricated drilling of Inconel 718
2016 · M. Cuesta, P. Aristimuño, et al. · Applied Thermal Engineering · 39
Tool condition monitoring in micromilling based on hierarchical integration of signal measures
2008 · K. Jemielniak, S. Bombiński, et al. · CIRP Annals · 37
Study and improvement of surgical drill bit geometry for implant site preparation
2014 · Josu Soriano, Ainhara Garay, et al. · The International Journal of Advanced Manufacturing Technology · 35
Measurement of plastic strain and plastic strain rate during orthogonal cutting for Ti-6Al-4V
2021 · A. Sela, G. Ortiz-de-Zarate, et al. · International Journal of Mechanical Sciences · 29
PDF
Roughness maps to determine the optimum process window parameters in face milling
2022 · Xabier Lazkano, Patxi X. Aristimuño, et al. · International Journal of Mechanical Sciences · 24
Digital Interferometry Applied to Thermogravitational Technique
2018 · E. Lapeira, A. Mialdun, et al. · Microgravity Science and Technology · 24
PDF
Analytical modeling of the uncut chip geometry to predict cutting forces in orthogonal centric turn-milling operations
2019 · Harry Otalora-Ortega, Patxi Aristimuño Osoro, et al. · International Journal of Machine Tools and Manufacture · 23
Microstructure based flow stress model to predict machinability in ferrite–pearlite steels
2019 · M. Saez-de-Buruaga, P. Aristimuño, et al. · CIRP Annals · 22
Uncut chip geometry determination for cutting forces prediction in orthogonal turn-milling operations considering the tool profile and eccentricity
2021 · Harry Otalora-Ortega, Patxi Aristimuño Osoro, et al. · International Journal of Mechanical Sciences · 17
PDF
Mechanics of milling 48-2-2 gamma titanium aluminide
2020 · Abbas Hussain, S. Ehsan Layegh, et al. · CIRP journal of manufacturing science and technology · 17
PDF
A Coupled Eulerian Lagrangian Model to Predict Fundamental Process Variables and Wear Rate on Ferrite-pearlite Steels
2017 · M. Saez-de-Buruaga, J.A. Esnaola, et al. · Procedia CIRP · 17
PDF
Uncertainty of temperature measurements in dry orthogonal cutting of titanium alloys
2015 · Daniel Soler, Patxi Aristimuño, et al. · Infrared Physics & Technology · 17
Cutting process in glass peripheral milling
2013 · Takashi Matsumura, Patxi Aristimuno, et al. · Journal of Materials Processing Technology · 17
A tribological characterisation of Ti-48Al-2Cr-2Nb and Ti-6Al-4V alloys with dry, flood, and MQL lubricants
2023 · Abhishek V. Hukkerikar, Pedro-J. Arrazola, et al. · CIRP journal of manufacturing science and technology · 16
A mechanistic model to predict cutting force on orthogonal machining of Aluminum 7475-T7351 considering the edge radius
2019 · A. Sela, G. Ortiz-de-Zarate, et al. · Procedia CIRP · 16
Finding Correlations between Tool Life and Fundamental Dry Cutting Tests in Finishing Turning of Steel
2015 · D. Soler, P.X. Aristimuño, et al. · Procedia Engineering · 11
PDF
Effects of rotational speed and feed rate on temperature rise, feed force and cutting torque when drilling bovine cortical bone
2012 · J. Soriano, L. M. Iriarte, et al. · AIP conference proceedings · 10
A novel computational approach using receptance coupling substructure analysis for prediction of tool tip dynamics in industrial machining applications
2025 · Jesus David Chaux, Patxi X. Aristimuño Osoro, et al. · International Journal of Machine Tools and Manufacture · 9
Surface drag analysis after Ti-6Al-4V orthogonal cutting using grid distortion
2020 · A. Sela, G. Ortiz-de-Zarate, et al. · Procedia CIRP · 9
Works count: 45
Citation count: 826
H-index: 17
I10-index: 23
Year
Topic
Type