Get started
Author

Enrique Juste

Shaping of ceramic parts by selective laser melting of powder bed
2014 · Enrique Juste, Fabrice Petit, et al. · Journal of materials research/Pratt's guide to venture capital sources · 126
Binder jetting process with ceramic powders: Influence of powder properties and printing parameters
2022 · Qirong Chen, Enrique Juste, et al. · Open Ceramics · 72
Oxygen permeation, thermal and chemical expansion of (La, Sr)(Fe, Ga)O3−δ perovskite membranes
2008 · E JUSTE, A JULIAN, et al. · Journal of Membrane Science · 54
Elaboration of La0.8Sr0.2Fe0.7Ga0.3O3−δ/La0.8M0.2FeO3−δ (M=Ca, Sr and Ba) asymmetric membranes by tape-casting and co-firing
2009 · A. Julian, E. Juste, et al. · Journal of Membrane Science · 42
Powder Bed Selective Laser Processing of Alumina: Scanning Strategies Investigation
2022 · Mohamed Abdelmoula, Gökhan Küçüktürk, et al. · Applied Sciences · 25
PDF
Post-infiltration to improve the density of binder jetting ceramic parts
2022 · Qirong Chen, Enrique Juste, et al. · Journal of the European Ceramic Society · 23
Thermal behaviour of La0.8Sr0.2Fe1−xGaxO3−δ (x=0 or x=0.3)
2009 · A. Julian, E. Juste, et al. · Journal of the European Ceramic Society · 23
Enhancing powder bed fusion of alumina ceramic material: a comprehensive study from powder tailoring to mechanical performance evaluation
2024 · Mohamed Abdelmoula, Gökhan Küçüktürk, et al. · The International Journal of Advanced Manufacturing Technology · 20
PDF
Experimental investigation on green ceramic machining with nanosecond laser source
2020 · Anthonin Demarbaix, François Ducobu, et al. · Journal of Manufacturing Processes · 18
Influence of microstructure and architecture on oxygen permeation of La(1−X)SrXFe(1−Y)(Ga, Ni)YO3−δ perovskite catalytic membrane reactor
2009 · E. Juste, A. Julian, et al. · Journal of the European Ceramic Society · 9
Investigating Defect Detection in Advanced Ceramic Additive Manufacturing Using Active Thermography
2024 · Anthonin Demarbaix, Enrique Juste, et al. · NDT · 5
Catalytic Membrane Reactor: Multilayer membranes elaboration
2007 · Julian, Aurélie, Juste, Enrique, et al. · HAL · 5
Elaboration de réacteurs catalytiques membranaires à microstructures et architectures contrôlées
2008 · Enrique Juste · OpenGrey (Institut de l'Information Scientifique et Technique) · 4
Tool wear for finishing milling of green thermoplastic-ceramic composites fabricated with pellet AM
2024 · Laurent Spitaels, Naiara Aldeiturriaga Olabarri, et al. · Procedia CIRP · 3
Hybrid Fabrication of Zirconia Parts with Smooth Surface Texture and Tight Tolerances
2024 · Laurent Spitaels, Valentin Dambly, et al. · Journal of Composites Science · 1
Functional refractory molds for metal casting built by additive manufacturing
2017 · Geoffroy Bister, Dominique Hautcoeur, et al. · ORBi (University of Liège) · 1
Effect of Residual Glass Fraction on the Crystallization Behavior and Thermomechanical Properties of STS (Strontium Titanium Silicate) Glass-Ceramics
2026 · Oussama Zwein, Maurice Gonon, et al. · Ceramics
Powder‐Bed Fusion ( PBF )
2026 · Enrique Juste, Fabrice Petit · Wiley eBooks
Laser Powder Bed Fusion of Alumina: Effects of Scanning Strategies on External and Internal Defects
2026 · Mohamed Abdelmoula, Gökhan Küçüktürk, et al. · Advanced Engineering Materials
Processing of transparent borosilicate glass from powder: confrontation of modeling and experimentation
2026 · Kermel, Christine, Juste, Enrique, et al. · ORBi UMONS
Evaluation of the achievable surface topographies, dimensional and geometrical tolerances in hybrid manufacturing of PLA parts by Fused Filament Fabrication (FFF) and milling
2026 · Laurent Spitaels, Valentin Dambly, et al. · Procedia CIRP
VerAdMa project - Production of complex-shaped glass parts using additive manufacturing methods
2025 · Mégret, Alexandre, Kermel, Christine, et al. · ORBi UMONS
PDF
Projet VerAdMa – Mise en œuvre de verre de forme complexe par broyage et frittage
2025 · Mégret, Alexandre, Kermel, Christine, et al. · ORBi UMONS
PDF
Manufacture of cordierite parts by robocasting from recycled powders
2024 · Casarrubios, Franklin, Gonon, Maurice François, et al. · ORBi UMONS
PDF
Manufacture of cordierite parts by robocasting from recycled powder
2023 · Casarrubios, Franklin, Gonon, Maurice François, et al. · ORBi UMONS
PDF
Works count: 48
Citation count: 431
H-index: 9
I10-index: 9
Year
Topic
Type