Get started
Author

Édu Ruiz

Observed names: E RUIZ, E. Ruiz, Edu Ruiz, Edu Ruiz, Edu Ruiz,, Eduardo Ruiz, Eduardo Ruíz, Ruiz Edu, Ruiz, E., Ruiz, Edu, Ruiz, Eduardo, É Ruiz
ORCID: 0000-0002-4649-2317
Observed ORCID: 0000-0002-4649-2317
OpenAlex ID: A5089755745
Experimental determination of the permeability of textiles: A benchmark exercise
2011 · R. Arbter, J.M. Beraud, et al. · Composites Part A Applied Science and Manufacturing · 306
Experimental determination of the permeability of engineering textiles: Benchmark II
2014 · N. Vernet, E. Ruiz, et al. · Composites Part A Applied Science and Manufacturing · 267
PDF
Optimization of injection flow rate to minimize micro/macro-voids formation in resin transfer molded composites
2005 · E RUIZ, V ACHIM, et al. · Composites Science and Technology · 237
Advanced numerical simulation of liquid composite molding for process analysis and optimization
2005 · François Trochu, Edu Ruiz, et al. · Composites Part A Applied Science and Manufacturing · 199
Porosity reduction using optimized flow velocity in Resin Transfer Molding
2008 · Jean Sébastien Leclerc, Edu Ruiz · Composites Part A Applied Science and Manufacturing · 188
Numerical analysis of cure temperature and internal stresses in thin and thick RTM parts
2005 · Edu Ruiz, François Trochu · Composites Part A Applied Science and Manufacturing · 188
Thermomechanical Properties during Cure of Glass-Polyester RTM Composites: Elastic and Viscoelastic Modeling
2005 · Edu Ruiz, Francois Trochu · Journal of Composite Materials · 107
A Comparative Study of Dispersion Techniques for Nanocomposite Made with Nanoclays and an Unsaturated Polyester Resin
2011 · Farida Bensadoun, Nadir Kchit, et al. · Journal of Nanomaterials · 77
PDF
Multi-criteria thermal optimization in liquid composite molding to reduce processing stresses and cycle time
2005 · Edu Ruiz, F. Trochu · Composites Part A Applied Science and Manufacturing · 69
Prediction of optimal flow front velocity to minimize void formation in dual scale fibrous reinforcements
2012 · François LeBel, Amir Ershad Fanaei, et al. · International Journal of Material Forming · 65
Viscoelastic behavior of an epoxy resin during cure below the glass transition temperature: Characterization and modeling
2018 · Alice Courtois, Martin Hirsekorn, et al. · Journal of Composite Materials · 63
Numerical analysis of viscoelastic process-induced residual distortions during manufacturing and post-curing
2018 · Maria Benavente, Lionel Marcin, et al. · Composites Part A Applied Science and Manufacturing · 59
In‐plane anisotropic permeability characterization of deformed woven fabrics by unidirectional injection. Part I: Experimental results
2007 · C. Demaría, Edu Ruiz, et al. · Polymer Composites · 55
Numerical multiscale homogenization approach for linearly viscoelastic 3D interlock woven composites
2018 · A. Courtois, L. Marcin, et al. · International Journal of Solids and Structures · 51
PDF
Determination of the optimal impregnation velocity in Resin Transfer Molding by capillary rise experiments and infrared thermography
2014 · C. Ravey, E. Ruiz, et al. · Composites Science and Technology · 50
Mechanical properties of composite sandwich structures with core or face sheet discontinuities
2015 · E.R. Fotsing, C. Leclerc, et al. · Composites Part B Engineering · 49
Chemical shrinkage and thermomechanical characterization of an epoxy resin during cure by a novel in situ measurement method
2013 · C. Billotte, F.M. Bernard, et al. · European Polymer Journal · 47
Lightweight damping of composite sandwich beams: Experimental analysis
2012 · ER Fotsing, M Sola, et al. · Journal of Composite Materials · 44
A Study of Nanoclay Reinforcement of Biocomposites Made by Liquid Composite Molding
2011 · Farida Bensadoun, Nadir Kchit, et al. · International Journal of Polymer Science · 40
PDF
Predicting porosity formation in phenolic resins for RTM manufacturing: The porosity map
2017 · Cédric Pupin, Annie Ross, et al. · Composites Part A Applied Science and Manufacturing · 38
High performance natural fiber composites from mat and UD flax reinforcements backed with a mat Binder: A study of mat fiber surface fibrillation
2022 · A. Bernaoui, G. Lebrun, et al. · Composites Part A Applied Science and Manufacturing · 36
Numerical prediction of saturation in dual scale fibrous reinforcements during Liquid Composite Molding
2015 · L. Gascón, J.A. García, et al. · Composites Part A Applied Science and Manufacturing · 33
PDF
A two-phase flow model to simulate mold filling and saturation in Resin Transfer Molding
2015 · L. Gascón, J. A. García, et al. · International Journal of Material Forming · 33
Guiding selection for reduced process development time in RTM
2009 · Vincent Achim, Edu Ruiz · International Journal of Material Forming · 33
Void content analysis and processing issues to minimize defects in liquid composite molding
2017 · François LeBel, Édu Ruiz, et al. · Polymer Composites · 32
Works count: 99
Citation count: 2,985
H-index: 30
I10-index: 51
Year
Topic
Type