Author

Jindřich Petruška

Observed names: J Petruska, J Petruška, J. Petruska, J. Petruška, Jindrich Petruska, Jindrich Petruška, Jindřich PETRUŠKA

Institution: Brno University of Technology

Observed institutions: Swansea University, VÚHŽ (Czechia), Institute of Solid Mechanics, Brno University of Technology

ORCID: 0000-0002-0189-5729

Observed ORCID: 0000-0002-0189-5729

OpenAlex ID: A5089796758

Calibration of ductile fracture criteria at negative stress triaxiality

2016 · Petr Kubík, František Šebek, et al. · International Journal of Mechanical Sciences · 79

Lode dependent plasticity coupled with nonlinear damage accumulation for ductile fracture of aluminium alloy

2017 · František Šebek, Jindřich Petruška, et al. · Materials & Design · 44

On the evaluation of strain inhomogeneity by hardness measurement of formed products

2003 · J Petruska · Journal of Materials Processing Technology · 36

Revealing the strengthening contribution of stacking faults, dislocations and grain boundaries in severely deformed LPBF AlSi10Mg alloy

2023 · Przemysław Snopiński, Michal Kotoul, et al. · Scientific Reports · 32

PDF

Comparative investigation of ductile fracture with 316L austenitic stainless steel in small punch tests: Experiments and simulations

2018 · Petr Kubík, František Šebek, et al. · Theoretical and Applied Fracture Mechanics · 28

Strain hardening exponent role in phenomenological ductile fracture criteria

2015 · František Šebek, Petr Kubík, et al. · European Journal of Mechanics - A/Solids · 27

Novel approach to computational simulation of cross roll straightening of bars

2016 · Jindřich Petruška, Tomáš Návrat, et al. · Journal of Materials Processing Technology · 23

Notched specimen under compression for ductile failure criteria

2018 · Petr Kubík, František Šebek, et al. · Mechanics of Materials · 19

Cold forming of bolts without thermal treatment

2002 · L Janı́ček, J Petruška, et al. · Journal of Materials Processing Technology · 18

Computationally-experimental workability determination of compressed cylindrical specimen with surface defect

1998 · J Petruška, L Janı́ček · Journal of Materials Processing Technology · 18

Solution to problems caused by associated non-quadratic yield functions with respect to the ductile fracture

2022 · Radek Vobejda, František Šebek, et al. · International Journal of Plasticity · 17

Sequential simulation and neural network in the stress–strain curve identification over the large strains using tensile test

2017 · Ivan Jeník, Petr Kubík, et al. · Archive of Applied Mechanics · 16

Ductile fracture predictions in small punch testing of cold-rolled aluminium alloy

2018 · František Šebek, Namsu Park, et al. · Engineering Fracture Mechanics · 15

Low-Cycle Fatigue, Fractography and Life Assessment of EN AW 2024-T351 under Various Loadings

2018 · M. Peč, J. Zapletal, et al. · Experimental Techniques · 12

Extremely Low-Stress Triaxiality Tests in Calibration of Fracture Models in Metal-Cutting Simulation

2016 · František Šebek, Petr Kubík, et al. · Metallurgical and Materials Transactions A · 12

Automated calibration of advanced cyclic plasticity model parameters with sensitivity analysis for aluminium alloy 2024-T351

2019 · Michal Peč, František Šebek, et al. · Advances in Mechanical Engineering · 11

PDF

Numerical and experimental simulation of pass rolling

1996 · P. Macura, J. Petruska · Journal of Materials Processing Technology · 11

Calibration of Selected Ductile Fracture Criteria Using Two Types of Specimens

2013 · Petr Kubík, František Šebek, et al. · Key engineering materials · 10

A New Model for Fast Analysis of Leveling Process

2012 · Jindřich Petruška, Tomas Návrat, et al. · Advanced materials research · 9

PDF

Optimal pressure vessel shape design to maximize limit load

1986 · J. Middleton, J. Petruska · Engineering Computations · 9

A Fully Coupled Thermomechanical Damage Analysis of Hot Closed Die Forging Using Finite Element Modeling

2020 · Michal Nytra, Petr Kubík, et al. · Journal of Materials Engineering and Performance · 8

Computational prediction of chevron cracking during multi-pass cold forward extrusion

2023 · Petr Kubík, Jindřich Petruška, et al. · Journal of Manufacturing Processes · 6

Ductile Fracture Criteria in Prediction of Chevron Cracks

2013 · Jindřich Petruška, Petr Kubík, et al. · Advanced materials research · 6

PDF

Ductile Failure Predictions for the Three-Point Bending Test of a Complex Geometry Made From Aluminum Alloy

2019 · Petr Kubík, František Šebek, et al. · Journal of Engineering Materials and Technology · 5

Ni-Ti Self-Expanding Vascular Stent Configuration and Biomedical Interaction with Artery: Finite Element Analysis

2016 · Pejman Shayanfard, Pavel Šandera, et al. · Diffusion and defect data, solid state data. Part B, Solid state phenomena/Solid state phenomena · 5

Works count: 73

Citation count: 521

H-index: 13

I10-index: 18