Get started
Author

Uğur Köklü

Observed names: Koklu, Uğur, Köklü, U., Köklü, Uğur, U. Köklü, Ugur Koklu, Ugur Köklü, UĞUR KOKLU, Uğur KÖKLÜ
ORCID: 0000-0002-9205-9768
Observed ORCID: 0000-0002-9205-9768
OpenAlex ID: A5089887467
Cryogenic machining of carbon fiber reinforced plastic (CFRP) composites and the effects of cryogenic treatment on tensile properties: A comparative study
2018 · Sezer Morkavuk, Uğur Köklü, et al. · Composites Part B Engineering · 221
An experimental study on the effects of various drill types on drilling performance of GFRP composite pipes and damage formation
2019 · Lokman Gemi, Sezer Morkavuk, et al. · Composites Part B Engineering · 145
The effects of stacking sequence on drilling machinability of filament wound hybrid composite pipes: Part-1 mechanical characterization and drilling tests
2020 · Lokman Gemi, Uğur Köklü, et al. · Composites Part B Engineering · 141
The effects of stacking sequence on drilling machinability of filament wound hybrid composite pipes: Part-2 damage analysis and surface quality
2019 · Lokman Gemi, Sezer Morkavuk, et al. · Composite Structures · 118
A comparison of flood cooling, minimum quantity lubrication and high pressure coolant on machining and surface integrity of titanium Ti-5553 alloy
2018 · Yusuf Kaynak, Armin Gharibi, et al. · Journal of Manufacturing Processes · 95
Impact of Cryogenic Condition and Drill Diameter on Drilling Performance of CFRP
2017 · Gültekin Basmaci, A. Yoruk, et al. · Applied Sciences · 89
PDF
Analysis of flat-end milling forces considering chip formation process in high-speed cutting of Ti6Al4V titanium alloy
2019 · Mehmet Aydın, Uğur Köklü · Simulation Modelling Practice and Theory · 88
PDF
Effect of dipped cryogenic approach on thrust force, temperature, tool wear and chip formation in drilling of AZ31 magnesium alloy
2020 · Ugur Koklu, Himmet Coban · Journal of Materials Research and Technology · 75
PDF
Influence of molding conditions on the shrinkage and roundness of injection molded parts
2009 · Mustafa Kurt, Yusuf Kaynak, et al. · The International Journal of Advanced Manufacturing Technology · 73
Evaluation of Cutting-Tool Coating on the Surface Roughness and Hole Dimensional Tolerances during Drilling of Al6061-T651 Alloy
2021 · Hamza A. Al-Tameemi, Thamir Al-Dulaimi, et al. · Materials · 67
PDF
Investigation of the effect of symmetrical hybrid stacking on drilling machinability of unidirectional CFRP, GFRP and hybrid composites: Drilling tests and damage analysis
2024 · Şakir Yazman, Lokman Gemi, et al. · Composites Part A Applied Science and Manufacturing · 65
A comprehensive investigation into the influence of variation in the stacking sequence on the mechanical behaviour and drilling machinability of basalt fiber-reinforced composite tubes
2025 · Furkan Erhan, Lokman Gemi, et al. · Composites Part B Engineering · 59
Cryogenic Drilling of Carbon Fiber-reinforced Composite (cfrp)
2018 · UĞUR KOKLU, SEZER MORKAVUK · Surface Review and Letters · 59
The influence of drilling-induced damages and hole quality on hoop tensile and fatigue behavior of CFRP tubes
2024 · Sezer Morkavuk, Kubilay Aslantaş, et al. · Composites Part A Applied Science and Manufacturing · 55
Evaluation of drilling by induced delamination of hybrid biocomposites reinforced with natural fibers: A statistical analysis by RSM
2024 · Abdelmalek Elhadi, Salah Amroune, et al. · Journal of Composite Materials · 52
Taguchi optimization of surface roughness in grinding of cryogenically treated AISI 5140 steel
2020 · Fuat Kara, Uğur Köklü, et al. · Materials Testing · 52
The effect of cutting tool coating on the form and dimensional errors of machined holes in GLARE® fibre metal laminates
2020 · K. Giasin, J. Hawxwell, et al. · The International Journal of Advanced Manufacturing Technology · 52
PDF
The effect of cryogenic machining of S2 glass fibre composite on the hole form and dimensional tolerances
2021 · Ugur Koklu, Sezer Morkavuk, et al. · The International Journal of Advanced Manufacturing Technology · 46
PDF
Microstructural investigation and hole quality evaluation in S2/FM94 glass-fibre composites under dry and cryogenic conditions
2020 · Khaled Giasin, Antigoni Barouni, et al. · Journal of Reinforced Plastics and Composites · 46
The effects of through tool cryogenic machining on the hole quality in GLARE® fibre metal laminates
2021 · Khaled Giasin, Alisha Dad, et al. · Journal of Manufacturing Processes · 44
An Experimental Comprehensive Analysis of Drilling Carbon Fiber Reinforced Plastic Tubes and Comparison With Carbon Fiber Reinforced Plastic Plate
2022 · Sezer Morkavuk, Uğur Köklü, et al. · Journal of Reinforced Plastics and Composites · 43
Experimental study on the effects of cold chamber die casting parameters on high-speed drilling machinability of casted AZ91 alloy
2020 · Şakir Yazman, Uğur Köklü, et al. · Journal of Manufacturing Processes · 42
Effect of Fibre Orientation on Impact Damage Resistance of S2/FM94 Glass Fibre Composites for Aerospace Applications: An Experimental Evaluation and Numerical Validation
2021 · Khaled Giasin, Hom N. Dhakal, et al. · Polymers · 41
Optimization and prediction of thrust force, vibration and delamination in drilling of functionally graded composite using Taguchi, ANOVA and ANN analysis
2019 · Uğur Köklü, Murat Mayda, et al. · Materials Research Express · 39
PDF
Identification and modeling of cutting forces in ball-end milling based on two different finite element models with Arbitrary Lagrangian Eulerian technique
2017 · Mehmet Aydın, Uğur Köklü · The International Journal of Advanced Manufacturing Technology · 39
PDF
Works count: 98
Citation count: 2,722
H-index: 31
I10-index: 58
Year
Topic
Type