Get started
Author

Mohamed H. Abdelaziz

Observed names: M ABDELAZIZ, M Abdelaziz,, M. ABDEL-AZIZ, M. Abdel-Aziz, M. Abdelaziz, M. H. Abdelaziz, M.H. Abdelaziz, Mohamed Abdel-Aziz, Mohamed Abdelaziz, Mohamed Hassan Abdelaziz
Observed institutions: Université du Québec à Chicoutimi, British University in Egypt, Zagazig University, Central Metallurgical Research and Development Institute, French University of Egypt, King Khalid University
ORCID: 0000-0001-5821-9310
Observed ORCID: 0000-0001-5821-9310
OpenAlex ID: A5091284497
Fabrication, microstructure and compressive behavior of ZC63 Mg–microballoon foam composites
2006 · A DAOUD, M ABOUELKHAIR, et al. · Composites Science and Technology · 116
Effect of additives on the microstructure and tensile properties of Al–Si alloys
2019 · Mohamed Hassan Abdelaziz, Agnes M. Samuel, et al. · Journal of Materials Research and Technology · 67
PDF
Strengthening precipitates and mechanical performance of Al–Si–Cu–Mg cast alloys containing transition elements
2021 · M.H. Abdelaziz, E.M. Elgallad, et al. · Materials Science and Engineering A · 43
Effect of morphological changes of eutectic Si particles on the ambient and high temperature tensile properties of Zr containing Al–Si alloys
2020 · Mohamed H. Abdelaziz, Agnes M. Samuel, et al. · Journal of Materials Research and Technology · 40
PDF
Effect of Rare Earth Metals on the Mechanical Properties and Fractography of Al–Si-Based Alloys
2019 · M. F. Ibrahim, M. H. Abdelaziz, et al. · International Journal of Metalcasting · 39
Static versus dynamic thermal exposure of transition elements-containing Al-Si-Cu-Mg cast alloy
2018 · M.H. Abdelaziz, H.W. Doty, et al. · Materials Science and Engineering A · 38
Hardness and Wear Behaviour of Semi-Solid Cast A390 Alloy Reinforced with Al2O3 and TiO2 Nanoparticles
2014 · I. El Mahallawi, Y. Shash, et al. · Arabian Journal for Science and Engineering · 35
Preparation and characterization of squeeze cast-Al–Si piston alloy reinforced by Ni and nano-Al2O3 particles
2014 · Hashem F. El-Labban, M. Abdelaziz, et al. · Journal of King Saud University - Engineering Sciences · 35
PDF
Spheroidization and Coarsening of Eutectic Si Particles in Al‐Si‐Based Alloys
2021 · Mohamed Ibrahim, Mohamed Abdelaziz, et al. · Advances in Materials Science and Engineering · 33
PDF
Effect of Aluminum Addition on the Microstructure, Tensile Properties, and Fractography of Cast Mg-Based Alloys
2017 · M. H. Abdelaziz, M. Paradis, et al. · Advances in Materials Science and Engineering · 25
PDF
Effect of β-Al5FeSi and π-Al8Mg3FeSi6 Phases on the Impact Toughness and Fractography of Al–Si–Mg-Based Alloys
2017 · E. A. Elsharkawi, M. H. Abdelaziz, et al. · International Journal of Metalcasting · 24
Melting and solidification characteristics of Zr-, Ni-, and Mn-containing 354-type Al-Si-Cu-Mg cast alloys
2019 · M. H. Abdelaziz, E. M. Elgallad, et al. · The Philosophical Magazine A Journal of Theoretical Experimental and Applied Physics · 17
Mechanical Performance of Zr‐Containing 354‐Type Al‐Si‐Cu‐Mg Cast Alloy: Role of Additions and Heat Treatment
2018 · M. H. Abdelaziz, H. W. Doty, et al. · Advances in Materials Science and Engineering · 16
PDF
Mechanical Performance and Precipitation Behavior in Al-Si-Cu-Mg Cast Alloys: Effect of Prolonged Thermal Exposure
2022 · Mohamed H. Abdelaziz, Agnes M. Samuel, et al. · Materials · 11
Effects of Alloying Elements and Testing Temperature on the Q-Index of Al–Si Based Alloys
2018 · L. Alyaldin, M. H. Abdelaziz, et al. · International Journal of Metalcasting · 11
Effect of Extended Thermal Exposure and Alloying Elements on the Morphology of Eutectic Si in Al–Si Cast Alloys
2020 · M. H. Abdelaziz, A. M. Samuel, et al. · International Journal of Metalcasting · 10
Effect of Ni and Mn Additions on the Ambient and High-Temperature Performance of Zr-Containing Al–Si–Cu–Mg-Based Alloys: Role of Precipitation Hardening
2018 · Loay Alyaldin, M. H. Abdelaziz, et al. · International Journal of Metalcasting · 10
Coating of 6028 Aluminum Alloy Using Aluminum Piston Alloy and Al-Si Alloy-Based Nanocomposites Produced by the Addition of Al-Ti5-B1 to the Matrix Melt
2014 · Hashem F. El-Labban, M. Abdelaziz, et al. · Metallurgical and Materials Transactions B · 10
Effect of Minor Addition of Ni and Zr on the High-Temperature Performance of Al–Si–Cu–Mg Cast Alloys
2021 · J. Hernandez-Sandoval, Y. Zedan, et al. · International Journal of Metalcasting · 9
Effect of Transition Metals Addition on Tensile Properties of Al–Si–Cu-Based Alloys at 25 °C and 250 °C: Role of Heat Treatment
2020 · L. Alyaldin, M. H. Abdelaziz, et al. · International Journal of Metalcasting · 9
Effect of Microalloying Elements on the Heat Treatment Response and Tensile Properties of Al-Si-Mg Alloys
2018 · Mohamed F. Ibrahim, Mohamed H. Abdelaziz, et al. · InTech eBooks · 9
PDF
Prediction of Mechanical Properties of Nano-Composites Using Vibration Modal Analysis: Application to Aluminum Piston Alloys
2013 · Hashem F. El-Labban, M. Abdelaziz, et al. · Materials Performance and Characterization · 9
Hardening of Al–Si–Cu–Mg Cast Alloys: Role of Ag and Zn addition
2021 · A. M. Samuel, F. H. Samuel, et al. · International Journal of Metalcasting · 8
Various Aspects Influencing the Fracture Behavior of Impact-Tested Zr-Containing Al–Si–Cu–Mg–354-Type Alloys
2021 · M. H. Abdelaziz, A. M. Samuel, et al. · International Journal of Metalcasting · 8
Metallurgical Parameters Controlling Fragmentation and Spheroidization Processes of Eutectic Si Particles in Al-Si Cast Alloys
2021 · A. M. Samuel, M. H. Abdelaziz, et al. · International Journal of Metalcasting · 7
Works count: 58
Citation count: 733
H-index: 13
I10-index: 18
Year
Topic
Type