Get started
Author

Hong Li Xiao

Investigation on process parameters of 3D printed continuous carbon fiber-reinforced thermosetting epoxy composites
2020 · Yueke Ming, Shaoqiu Zhang, et al. · Additive manufacturing · 141
A Novel Route to Fabricate High-Performance 3D Printed Continuous Fiber-Reinforced Thermosetting Polymer Composites
2019 · Yueke Ming, Yugang Duan, et al. · Materials · 115
PDF
Energy-absorbing characteristics of hollow-cylindrical hierarchical honeycomb composite tubes inspired a beetle forewing
2021 · Y. Duan, T. Zhang, et al. · Composite Structures · 64
Fusion-bonding performance of short and continuous carbon fiber synergistic reinforced composites using fused filament fabrication
2022 · Zhibo Xin, Yue Ma, et al. · Composites Part B Engineering · 49
Joule heating synthesis of carbon fiber/graphene 3D crosslinked structure for lightning strike protection and electromagnetic interference in aerospace composites
2023 · Yansong Zhu, Yueke Ming, et al. · Chemical Engineering Journal · 45
Fabrication of continuous carbon fiber mesh for lightning protection of large-scale wind-turbine blade by electron beam cured printing
2019 · Ben Wang, Yueke Ming, et al. · Additive manufacturing · 43
Design of damage-resistant hybrid lay-up structures for fiber-reinforced composites based on interface properties
2023 · Hong Xiao, Tianqi Liu, et al. · Composite Structures · 35
4D Printing of 3D Carbon‐Medium Reinforced Thermosetting Shape Memory Polymer Composites with Superior Load‐Bearing and Fast‐Response Shape Reconfiguration
2024 · Jie Wang, Yatao Zhao, et al. · Advanced Functional Materials · 34
Evolution of TROP2: Biological insights and clinical applications
2025 · Xinyue Zhang, Hong Xiao, et al. · European Journal of Medicinal Chemistry · 33
Fabrication of triangular corrugated structure using 3D printed continuous carbon fiber-reinforced thermosetting epoxy composites
2021 · Ben Wang, Yueke Ming, et al. · Polymer Testing · 31
PDF
Fabrication of a novel continuous fiber 3D printed thermoset all-composite honeycomb sandwich structure with polymethacrylimide foam reinforcement
2023 · Feng Wang, Yueke Ming, et al. · Composites Communications · 29
A Sensitivity Analysis-Based Parameter Optimization Framework for 3D Printing of Continuous Carbon Fiber/Epoxy Composites
2019 · Hong Xiao, Wei Han, et al. · Materials · 29
PDF
Laser-assisted AFP-TPC manufacturing of CF/PEEK high-performance thermoplastic composites with low warpage-deformation defects
2024 · Chenping Zhang, Yugang Duan, et al. · Journal of Manufacturing Processes · 28
Effect of porosity and crystallinity on mechanical properties of laser in-situ consolidation thermoplastic composites
2022 · Chenping Zhang, Yugang Duan, et al. · Polymer · 26
Detection and estimation of mental fatigue in manual assembly process of complex products
2017 · Hong Xiao, Yugang Duan, et al. · Assembly Automation · 24
The effects of processing parameters on the wedge peel strength of CF/PEEK laminates manufactured using a laser tape placement process
2022 · Chenping Zhang, Yugang Duan, et al. · The International Journal of Advanced Manufacturing Technology · 23
PDF
Effect of tailored plies on the energy absorption capability of square CFRP tubes with discontinuous fibers
2018 · Zhibo Xin, Yugang Duan, et al. · Composite Structures · 23
Bio-inspired self-stitching for enhancing ductility and impact resistance of unidirectional laminated composites
2023 · Zhongqiu Ding, Hong Xiao, et al. · Composites Science and Technology · 22
Investigation on tempering process parameters of in-situ consolidation CF/PEEK thermoplastic composites
2022 · Chenping Zhang, Yugang Duan, et al. · Journal of Manufacturing Processes · 22
Sensitivity analysis of correlated inputs: Application to a riveting process model
2016 · Hong Xiao, Yugang Duan · Applied Mathematical Modelling · 22
PDF
Preparation of MWCNTs/CF/PEEK multi-scale composites with good mechanical and electrical conductivity by a two-step process of AFP and out-of-autoclave tempering
2022 · Chenping Zhang, Yugang Duan, et al. · Composites Part C Open Access · 20
Low‐temperature 3D printing and curing process of continuous fiber‐reinforced thermosetting polymer composites
2023 · Hong Xiao, Qian He, et al. · Polymer Composites · 17
Hybrid Bio-Inspired Structure Based on Nacre and Woodpecker Beak for Enhanced Mechanical Performance
2021 · Zhongqiu Ding, Ben Wang, et al. · Polymers · 16
PDF
Improved structural efficiency in composite manufacturing via hammered printing for large-curvature fiber paths
2023 · Ben Wang, Yueke Ming, et al. · Additive manufacturing · 15
Improving delamination resistance of 3D printed continuous fiber-reinforced thermoset composites by multi-scale synergistic toughening of mono-component polyetherketone-cardo
2023 · Feng Wang, Yueke Ming, et al. · Composites Science and Technology · 15
Works count: 59
Citation count: 1,077
H-index: 20
I10-index: 29
Year
Topic
Type