Author

Won Jong Choi

Observed institution: Korea Aerospace University

OpenAlex ID: A5100826948

Recent Trends in Surface Treatment Technologies for Airframe Adhesive Bonding Processing: A Review (1995–2008)

2010 · Sang Yoon Park, Won Jong Choi, et al. · The Journal of Adhesion · 135

Effects of surface pre-treatment and void content on GLARE laminate process characteristics

2010 · Sang Yoon Park, Won Jong Choi, et al. · Journal of Materials Processing Technology · 122

Effect of vacuum thermal cyclic exposures on unidirectional carbon fiber/epoxy composites for low earth orbit space applications

2011 · Sang Yoon Park, Heung Soap Choi, et al. · Composites Part B Engineering · 96

The effects of void contents on the long-term hygrothermal behaviors of glass/epoxy and GLARE laminates

2009 · Sang Yoon Park, Won Jong Choi, et al. · Composite Structures · 91

Effect of drilling parameters on hole quality and delamination of hybrid GLARE laminate

2017 · Sang Yoon Park, Won Jong Choi, et al. · Composite Structures · 70

An experimental study into aging unidirectional carbon fiber epoxy composite under thermal cycling and moisture absorption

2018 · Sang Yoon Park, Won Jong Choi, et al. · Composite Structures · 56

A comparative study on the properties of GLARE laminates cured by autoclave and autoclave consolidation followed by oven postcuring

2009 · Sang Yoon Park, Won Jong Choi, et al. · The International Journal of Advanced Manufacturing Technology · 56

A Comparison of the Properties of Carbon Fiber Epoxy Composites Produced by Non-autoclave with Vacuum Bag Only Prepreg and Autoclave Process

2018 · Sang Yoon Park, Chi Hoon Choi, et al. · Applied Composite Materials · 50

Spring-back characteristics of fiber metal laminate (GLARE) in brake forming process

2006 · Se Young Kim, Won Jong Choi, et al. · The International Journal of Advanced Manufacturing Technology · 50

Cure kinetics and viscosity modeling for the optimization of cure cycles in a vacuum-bag-only prepreg process

2018 · Seong-Soon Hwang, Sang Yoon Park, et al. · The International Journal of Advanced Manufacturing Technology · 36

A review of the recent developments in surface treatment techniques for bonded repair of aluminum airframe structures

2017 · Sang Yoon Park, Won Jong Choi, et al. · International Journal of Adhesion and Adhesives · 20

Review of material test standardization status for the material qualification of laminated thermosetting composite structures

2020 · Sang Yoon Park, Won Jong Choi · Journal of Reinforced Plastics and Composites · 19

Analysis of effects of process factors on corrosion resistance of adhesive bonded joints for aluminum alloys

2019 · Sang Yoon Park, Won Jong Choi, et al. · Journal of Materials Processing Technology · 18

Investigation on the effectiveness of silane-based field level surface treatments of aluminum substrates for on-aircraft bonded repairs

2019 · Sang Yoon Park, Won Jong Choi · International Journal of Adhesion and Adhesives · 15

The Guidelines of Material Design and Process Control on Hybrid Fiber Metal Laminate for Aircraft Structures

2019 · Sang Yoon Park, Won Jong Choi · IntechOpen eBooks · 12

PDF

The effect of curing temperature on thermal, physical and mechanical characteristics of two types of adhesives for aerospace structures

2017 · Sang Yoon Park, Won Jong Choi, et al. · Journal of Adhesion Science and Technology · 12

Study on Bearing Strength and Failure Modes of Single Bolted Joint Carbon/Epoxy Composite Materials

2024 · Sang Min Park, Jin Hwan Jeon, et al. · Polymers · 10

PDF

3 Production Control Effect on Composite Material Quality and Stability for Aerospace Usage

2017 · Sang Yoon Park, Won Jong Choi · 8

Reinforcement of Abrasion Resistance for Tire Tread filled with Multi-Wall Carbon Nanotubes (MWCNTs)

2009 · Woon Su Oh, Won Jong Choi, et al. · 1

Load Transfer Behaviors of the Splice-Jointed Fiber Metal Laminates

2005 · Hee Seok Roh, Won Jong Choi, et al. · Transactions of the Korean Society of Mechanical Engineers A · 1

Works count: 20

Citation count: 878

H-index: 14

I10-index: 17