Get started
Author

Yu‐Sheng Shi

Fabrication and characterization of carbon fiber reinforced SiC ceramic matrix composites based on 3D printing technology
2018 · Wei Zhu, Hua Fu, et al. · Journal of the European Ceramic Society · 161
Enhancement mechanism of mechanical performance of highly porous mullite ceramics with bimodal pore structures prepared by selective laser sintering
2018 · An-Nan Chen, Meng Li, et al. · Journal of Alloys and Compounds · 122
Preform impregnation to optimize the properties and microstructure of RB-SiC prepared with laser sintering and reactive melt infiltration
2020 · Yang Zou, Chen-Hui Li, et al. · Journal of the European Ceramic Society · 60
Effect of particle grading on the properties of photosensitive slurry and BaTiO3 piezoelectric ceramic via digital light processing 3D printing
2023 · Kai Liu, Yunfei Sun, et al. · Journal of the European Ceramic Society · 55
Porous mullite ceramics with a fully closed-cell structure fabricated by direct coagulation casting using fly ash hollow spheres/kaolin suspension
2020 · Shuang Chen, Wei-Hao Cai, et al. · Ceramics International · 36
Lightweight mullite ceramics with controlled porosity and enhanced properties prepared by SLS using mechanical mixed FAHSs/polyamide12 composites
2019 · Meng Li, An-Nan Chen, et al. · Ceramics International · 36
Mullite ceramic foams with controlled pore structures and low thermal conductivity prepared by SLS using core-shell structured polyamide12/FAHSs composites
2019 · An-Nan Chen, Feng Gao, et al. · Ceramics International · 36
TEM analysis and mechanical strengthening mechanism of MnO2 sintering aid in selective laser sintered porous mullites
2019 · An-Nan Chen, Lu Lu, et al. · Journal of Alloys and Compounds · 34
Porous mullite ceramics with enhanced mechanical properties prepared by SLS using MnO2 and phenolic resin coated double-shell powders
2019 · An-Nan Chen, Jing-Yan Chen, et al. · Ceramics International · 34
Highly Efficient, Salt‐Resistant, and Chemically Durable Solar Evaporator for the Purification of Industrial High‐Salinity Wastewater
2025 · Congcan Shi, Pengyu Zhang, et al. · Advanced Functional Materials · 33
Ultra-High strength and toughness continuous SiCf/SiC ceramic matrix composites prepared by an additive manufacturing manipulator
2024 · Zhufeng Liu, Zhaoqing Li, et al. · Journal of the European Ceramic Society · 31
Preparation of porous Si3N4 ceramics via tailoring solid loading of Si3N4 slurry and Si3N4 poly-hollow microsphere content
2015 · Jia-Min Wu, Xiao-Yan Zhang, et al. · Journal of Advanced Ceramics · 28
PDF
An inter-layer remelting strategy to tailor microstructure and mechanical properties of 2219 Al-Cu alloy during wire arc additive manufacturing process and post-T6 heat treatment
2025 · Shang Zhu, Linfan Ke, et al. · Materials Science and Engineering A · 27
Influence of particle size on 3D‐printed piezoelectric ceramics via digital light processing with furnace sintering
2022 · Kai Liu, Jiaming Hu, et al. · International Journal of Applied Ceramic Technology · 26
Fabrication of porous fibrous alumina ceramics by direct coagulation casting combined with 3D printing
2017 · An-Nan Chen, Jia-Min Wu, et al. · Ceramics International · 26
Investigation of curing behavior and mechanical properties of SiC ceramics prepared by vat photopolymerization combined with pressureless liquid-phase sintering using Al2O3-coated SiC powder
2023 · Zhang-Ao Shi, Jia-Min Wu, et al. · Additive manufacturing · 24
Effects of AlN inorganic binder on the properties of porous Si3N4 ceramics prepared by selective laser sintering
2022 · Ya-Ru Wu, Jun-Hong He, et al. · Ceramics International · 24
Rapid in-situ solidification of SiO2 suspension by direct coagulation casting via controlled release of high valence counter ions from calcium iodate and pH shift
2016 · An-Nan Chen, Jia-Min Wu, et al. · Ceramics International · 24
Microstructure of selective laser sintered polyamide
2003 · Lin Liu-lan, Shi Yu-sheng, et al. · Journal of Wuhan University of Technology-Mater Sci Ed · 24
Influence of the content of polymethyl methacrylate on the properties of porous Si3N4 ceramics fabricated by digital light processing
2023 · Ya-Ru Wu, Chong Tian, et al. · Ceramics International · 22
Preparation of Si3N4 ceramics by aqueous gelcasting using non-toxic agar powder as gelling agent without cooling crosslink process
2019 · Jia-Min Wu, Yi-Xin Ma, et al. · Ceramics International · 21
Rapid and uniform in-situ solidification of alumina suspension via a non-contamination DCC-HVCI method using MgO sintering additive as coagulating agent
2017 · An-Nan Chen, Jia-Min Wu, et al. · Ceramics International · 19
Inspection of geometry influence and fiber orientation to characteristic value for short fiber reinforced ceramic matrix composite under bending load
2016 · Y. Shi, J.-M. Hausherr, et al. · Journal of the European Ceramic Society · 19
Particle surface oxidation modification and particle gradation strategy for the preparation of high-strength SiC ceramics via vat photopolymerization
2024 · Zhang-Ao Shi, Jia-Min Wu, et al. · Additive manufacturing · 18
Preparation and properties of K0.48Na0.52NbO3 ceramics for bone scaffolds via digital light processing
2023 · Ming-Zhu Pan, Yu-Xin Chen, et al. · Ceramics International · 17
Works count: 80
Citation count: 1,310
H-index: 21
I10-index: 41
Year
Topic
Type