Author

Tao Zhao

Institution: North Minzu University

Observed institutions: Beijing Institute of Technology, Southwest University of Science and Technology, Hefei University of Technology, National University of Defense Technology, North Minzu University

ORCID: 0000-0002-7884-441X

Observed ORCID: 0000-0002-7884-441X

OpenAlex ID: A5101448482

Calculation and Analysis on Configuration Parameters and Torque Characteristics of a Novel Spherical Stepper Motor

2006 · Tao Zhao · Proceedings of the CSEE · 23

Algebraic Method-Based Point-to-Point Trajectory Planning of an Under-Constrained Cable-Suspended Parallel Robot with Variable Angle and Height Cable Mast

2020 · Tao Zhao, Bin Zi, et al. · Chinese Journal of Mechanical Engineering · 21

Influence of layer thickness and extrusion ratio on strand morphology, porosity, surface roughness, and anisotropic mechanical properties in FDM

2025 · Xiaofei Lou, Xin’an Tang, et al. · Scientific Reports · 16

Dynamic simulation and disturbance torque analyzing of motional cable harness based on Kirchhoff rod model

2012 · Chunsheng Wang, Ruxin Ning, et al. · Chinese Journal of Mechanical Engineering · 15

Typical configuration analysis of a modular reconfigurable cable-driven parallel robot

2019 · Tao Zhao, Bin Zi, et al. · International Journal of Advanced Robotic Systems · 13

Design and fabrication of an aircraft static aeroelastic model based on rapid prototyping

2015 · Chao Wang, Guofu Yin, et al. · Rapid Prototyping Journal · 13

Design and Analysis of a Cable-Driven Parallel Robot for Waist Rehabilitation

2018 · Tao Zhao, Sen Qian, et al. · International Conference on Mechatronics, Robotics and Automation (ICMRA) · 9

Research on key technologies in the conformal polishing of complex surface optical components

2019 · Jiahao Yong, Xiaoqiang Peng, et al. · Applied Optics and Photonics China (AOPC): Space Optics, Telescopes, and Instrumentation · 4

Reconfigurable analysis and workspace optimization of modular cable-suspended parallel robot

2026 · Tao Zhao, Wei Dai, et al. · Scientific Reports · 1

Dynamic Modeling and Cable Tension Optimization of a Redundantly Constrained Cable-Driven Parallel Robot

2026 · Tao Zhao, Hengfa Wu, et al. · Actuators

Effects of nozzle diameter and fiber volume fraction on tensile properties of FDM-printed CCF/PLA composites

2026 · Tao Zhao, Xin Dong, et al. · PLoS ONE

Research on the key technology for processing efficiency improvement of aluminum alloy mirror chemical mechanical polishing

2019 · Tao Zhao, Xiaoqiang Peng, et al. · Applied Optics and Photonics China (AOPC): Space Optics, Telescopes, and Instrumentation

Works count: 12

Citation count: 115

H-index: 7

I10-index: 6