Get started
Author

Mert Coşkun

Observed names: Coşkun, Mert, M. Coskun, Mert Coskun
ORCID: 0000-0003-3307-982X
Observed ORCID: 0000-0003-3307-982X
OpenAlex ID: A5101478684
Investigation of the effects of different heat treatment parameters on the corrosion and mechanical properties of the AlSi10Mg alloy produced with direct metal laser sintering
2019 · Gökhan Özer, Gürkan Tarakçi, et al. · Materials and Corrosion · 47
Support optimization for overhanging parts in direct metal laser sintering
2018 · Zafer Cagatay Oter, Mert Coskun, et al. · Optik · 38
Effect of HIP process and subsequent heat treatment on microstructure and mechanical properties of direct metal laser sintered AlSi10Mg alloy
2020 · Onur Ertuğrul, Zafer Çağatay Öter, et al. · Rapid Prototyping Journal · 36
Improving the surface quality and mechanical properties of selective laser sintered PA2200 components by the vibratory surface finishing process
2021 · Hamaid M. Khan, Tolga B. Sirin, et al. · SN Applied Sciences · 32
PDF
Recycling of additive manufactured AlSi10Mg and its effect on mechanical properties
2022 · Mert Coşkun, Kerem Can Dizdar, et al. · Materials Chemistry and Physics · 31
Benefits of laser beam based additive manufacturing in die production
2018 · Zafer Cagatay Oter, Mert Coskun, et al. · Optik · 28
Thermo-mechanical simulations of selective laser melting for AlSi10Mg alloy to predict the part-scale deformations
2019 · Emrecan Soylemez, Ebubekir Koç, et al. · Progress in Additive Manufacturing · 23
Comparison of the effect of different topological designs and process parameters on mechanical strength in gears
2022 · Mustafa Enes Bulduk, Cemal İrfan Çalışkan, et al. · The International Journal of Advanced Manufacturing Technology · 22
Investigation of manufacturability and efficiency of micro channels with different geometries produced by direct metal laser sintering
2021 · Cemal İrfan Çalışkan, Mert Coşkun, et al. · The International Journal of Advanced Manufacturing Technology · 22
Investigation of direct metal laser sintering downskin parameters’ sagging effect on microchannels
2021 · Cemal İrfan Çalışkan, Gökhan Özer, et al. · The International Journal of Advanced Manufacturing Technology · 22
Effect of aging and finish machining on the surface integrity of selective laser melted maraging steel
2021 · Emre Tascioglu, Hamaid Mahmood Khan, et al. · Rapid Prototyping Journal · 18
The impact of aging and drag‐finishing on the surface integrity and corrosion behavior of the selective laser melted maraging steel samples
2021 · H.M. Khan, G. Özer, et al. · Materialwissenschaft und Werkstofftechnik · 18
Comparison of the mechanical properties and drilling performance of the AISI 316 parts produced with casting, LPBF and WAAM
2024 · Engin Kocaman, Uğur Köklü, et al. · Journal of the Brazilian Society of Mechanical Sciences and Engineering · 12
Large‐Scale Interlaboratory Study Along the Entire Process Chain of Laser Powder Bed Fusion: Bridging Variability, Standards, and Optimization across Metals and Polymers
2025 · Ihsan Murat Kuşoğlu, Sunidhi Garg, et al. · Advanced Engineering Materials · 10
Investigation of the Effect of Process Parameters and Geometry-Related Variations on Residual Stress for Aluminum 7050 Alloy Produced via Laser Powder Bed Fusion
2024 · Mert Coskun, Binnur Sagbas, et al. · Journal of Materials Engineering and Performance · 7
Unmanned Aerial Vehicle Production With Additive Manufacturing
2020 · Ebubekir Koç, Cemal İrfan Çalışkan, et al. · Journal of Aviation · 7
PDF
Effect of Building Platform Position on the Surface Quality, Dimensional Accuracy, and Geometrical Precision of Direct Metal Laser Sintering (DMLS) Parts
2021 · Zafer Cagatay Oter, Mert Coskun · SSRN Electronic Journal · 5
Evaluation of Lattice Material Suitability for Additive Manufactured Gears under Compression Loads
2025 · Cemal İrfan Çalışkan, Hamaid Mahmood Khan, et al. · Transactions of the Indian Institute of Metals · 3
PDF
Hollow Glass Sphere Modification Effect on Mechanical Properties of Powder Bed Fusion Processed Polyamide 12 Parts
2025 · Mustafa Cüneyt Coşkun, Alp Alparslan, et al. · Journal of Applied Polymer Science · 2
Energy density optimization in laser-based powder bed fusion of nano-modified PA12 powder feedstocks
2025 · Moritz Grünewald, Anna R. Ziefuss, et al. · Journal of Materials Science · 2
PDF
Selective Laser Sintering of Aluminum Extrusion Dies
2016 · Ebubekir Koç, Yaşar Akça, et al. · DSpace@FSM (FSM Vakif University) · 1
PDF
Mechanical and ultrasonic characterization of polyamide 11-copper composites manufactured with diverse scanning strategies and energy density parameters
2026 · Doğan Güneş, Umut Can Cingöz, et al. · Materials Testing
Enhanced compressive performance of LPBF AlSi10Mg lattice structures via PA12 and epoxy infiltration
2026 · Gürkan Tarakçı, Mert Coşkun, et al. · Progress in Additive Manufacturing
Geometry-controlled energy absorption in twisted TPMS gyroids fabricated from AlSi10Mg
2026 · Cemal İrfan Çalışkan, Hamaid Mahmood Khan, et al. · Journal of Alloys and Compounds
Improved compressive strength of PBF-LB Al7050 lattice structures via PA12–epoxy infiltration
2026 · Hamaid Mahmood Khan, Gürkan Tarakçı, et al. · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science
Works count: 28
Citation count: 388
H-index: 12
I10-index: 14
Year
Topic
Type