Get started
Author

Şeyda Polat

Observed names: POLAT, ŞEYDA, Polat, Ş., Polat, Şeyda, S. Polat, Seyda Polat, Ş Polat, Ş. Polat, Şeyda POLAT
ORCID: 0000-0002-9390-1486
Observed ORCID: 0000-0002-9390-1486
OpenAlex ID: A5101514283
Effect of zinc oxide type on ageing properties of Styrene Butadiene Rubber compounds
2009 · Nurhan Vatansever, Şeyda Polat · Materials & Design (1980-2015) · 30
Fractographical analysis of fatigue failed Cu–2.55Ni–0.55Si alloy
2015 · Ş.H. Atapek, S.G. Pantelakis, et al. · Theoretical and Applied Fracture Mechanics · 19
Failure behavior of PA12 based SLS lattice structure with macro-porosity
2018 · Serap Gümüs, Juergen M. Lackner, et al. · MATEC Web of Conferences · 16
PDF
Effect of tempering temperature and microstructure on the corrosion behavior of a tempered steel
2013 · Ş. Hakan Atapek, Şeyda Polat, et al. · Protection of Metals and Physical Chemistry of Surfaces · 16
Thermal and microstructural characterization of a novel ductile cast iron modified by aluminum addition
2020 · Gülşah Aktaş Çelik, Maria-Ioanna T. Tzini, et al. · International Journal of Minerals Metallurgy and Materials · 15
Observation of diffuse steaks in Au-Fe alloys utilizing synchrotron radiation
1987 · C. Marsh, S. Polat, et al. · Scripta Metallurgica · 15
Nitriding Effect on the Tribological Performance of CrN-, AlTiN-, and CrN/AlTiN-Coated DIN 1.2367 Hot Work Tool Steel
2023 · Gülşah Aktaş Çelik, Şaban Hakan Atapek, et al. · Materials · 14
PDF
Fatigue behavior of precipitation strengthened Cu–Ni–Si alloy modified by Cr and Zr addition
2020 · Ş. Hakan Atapek, Spiros Pantelakis, et al. · International Journal of Structural Integrity · 13
Investigation of Adhesion and Tribological Performance of CrN-, AlTiN-, and CrN/AlTiN-Coated X45CrMoV5-3-1 Tool Steel
2023 · Gülşah Aktaş Çelik, Konstantinos Fountas, et al. · Journal of Materials Engineering and Performance · 11
Hot Oxidation Resistance of a Novel Cast Iron Modified by Nb and Al Addition for Exhaust Manifold Applications
2022 · Gülşah Aktaş Çelik, Ş. Hakan Atapek, et al. · Metallurgical and Materials Transactions A · 11
Simulation and analysis of the solidification characteristics of a Si-Mo ductile iron
2021 · G.A. Çelik, M.-I. Tzini, et al. · Journal of Mining and Metallurgy Section B Metallurgy · 10
Spatial correlation of gamma-prime precipitates in a NiSi alloy
1986 · S. Polat, C. Marsh, et al. · Scripta Metallurgica · 10
On the properties of cast and powder metallurgical Cu–6Ni-1.5Si-0.15Al (wt.%) alloy
2024 · Ş. Hakan Atapek, Reza Bahrami, et al. · Vacuum · 9
Effect of coating type on electrode degradation and its life in resistance spot welding of a low carbon steel
2023 · Ümran Başkaya, Ramazan Uzun, et al. · Engineering Failure Analysis · 9
Wear Behaviour of Heat Treated 100Cr6 Steels
2013 · Şeyda Polat, Enbiya Türedi, et al. · Materials Testing · 9
Effect of Ni:Si ratio on microstructure and properties of powder metallurgical Corson alloy
2023 · Mehmet Akkaş, Atapek Hakan, et al. · Science of Sintering · 8
PDF
Matrix design of a novel ductile cast iron modified by W and Al: A comparison between thermodynamic modeling and experimental data
2020 · Gülşah Aktaş Çelik, Maria-Ioanna T. Tzini, et al. · Metallurgical and Materials Engineering · 8
Effect of Single and Duplex Thin Hard Film Coatings on the Wear Resistance of 1.2343 Tool Steel
2017 · Gülşah Aktaş Çelik, Şeyda Polat, et al. · Transactions of the Indian Institute of Metals · 8
A study of wear of high-chromium cast iron under dry friction
2013 · Ş. H. Atapek, Ş. Polat · Metal Science and Heat Treatment · 8
Initial Oxidation Stage of SiMo and SiNb-xAl Ductile Cast Irons in Air and CO2-Containing Atmospheres
2022 · Gülşah Aktaş Çelik, Ş. Hakan Atapek, et al. · International Journal of Metalcasting · 7
Tribological behavior of CrN-coated Cr–Mo–V steels used as die materials
2017 · Gülşah Aktaş Çelik, Şeyda Polat, et al. · International Journal of Minerals Metallurgy and Materials · 7
Tribo corrosion behavior of cast and selective laser melted Co Cr alloy for dental applications
2016 · Ş. Hakan Atapek, Tsanka Dikova, et al. · Machines. Technologies. Materials. · 7
A small-angle neutron scattering study of the kinetics of phase separation in a supersaturated Ni-12.5 at. pct Si alloy
1989 · S. Polat, Haydn Chen, et al. · Metallurgical Transactions A · 7
Biodegradation of anti -microbial titanium-magnesium-silver coatings on polyetheretherketone for bone-contact applications
2016 · Serap Gümüş, Şeyda Polat, et al. · Surface and Coatings Technology · 6
Prediction of contact stress and wear analysis of nitrided and CAPVD coated AISI H11 steel under dry sliding conditions
2024 · Gülşah Aktaş Çelik, Eser Yarar, et al. · Engineering Failure Analysis · 5
Works count: 179
Citation count: 347
H-index: 10
I10-index: 12
Year
Topic
Type