Get started
Author

Khairul Azwan Ismail

Observed names: Ismail, Khairul Azwan, K A Ismail, K. A. Ismail, K. Azwan Ismail, K.A Ismail, K.A. Ismail, Khairul Azwan Ismail, Khairul A. Ismail, Khairul Azwan bin Ismail, Khairul Ismail
ORCID: 0000-0001-8581-1184
Observed ORCID: 0000-0001-8581-1184
OpenAlex ID: A5101974608
Impact of Viscoplastic Bodies: Dissipation and Restitution
2008 · K. A. Ismail, W. J. Stronge · Journal of Applied Mechanics · 65
Coefficient of restitution of sports balls: A normal drop test
2012 · Adli Haron, K A Ismail · IOP Conference Series Materials Science and Engineering · 49
PDF
Viscoplastic analysis for direct impact of sports balls
2012 · K.A. Ismail, W.J. Stronge · International Journal of Non-Linear Mechanics · 40
Impact models and coefficient of restitution: A review
2015 · Masniezam Ahmad, Khairul Azwan Ismail, et al. · International Conference on Mechanical and Manufacturing Engineering (ICME2015) · 39
Application of RSM to Optimize Moulding Conditions for Minimizing Shrinkage in Thermoplastic Processing
2016 · S.M. Nasir, K.A. Ismail, et al. · Key engineering materials · 31
Convergence of Finite Element Model for Crushing of a Conical Thin-walled Tube
2013 · M. Ahmad, K.A. Ismail, et al. · Procedia Engineering · 30
PDF
Crashworthiness performance of thin-walled structures towards design configuration in vehicle crash boxes application: a review
2025 · Mohd Hazwan Mohd Hanid, Safian Sharif, et al. · International Journal of Crashworthiness · 26
Calculated Golf Ball Performance Based on Measured Visco-hyperelastic Material Properties (P5)
2008 · Khairul Ismail, Bill Stronge · The Engineering of Sport 7 · 23
Improved Model for Impact of Viscoplastic Bodies
2016 · Masniezam Ahmad, Khairul Azwan Ismail, et al. · Key engineering materials · 22
Comparison between Single and Multi Gates for Minimization of Warpage Using Taguchi Method in Injection Molding Process for ABS Material
2013 · S.M. Nasir, Khairul Azwan Ismail, et al. · Key engineering materials · 20
Impact Response of Thin-Walled Tubes: A Prospective Review
2012 · Fauziah Mat, K. Azwan Ismail, et al. · Applied Mechanics and Materials · 20
Mathematical models for productivity and availability of automated lines
2012 · R. Usubamatov, K. A. Ismail, et al. · The International Journal of Advanced Manufacturing Technology · 19
Energy absorption and failure behavior of Al/CFRP/GFRP hybrid tubes under quasi-static axial loading
2023 · Fauziah Mat, Mohd Ridzuan Mohd Jamir, et al. · Journal of Mechanical Science and Technology · 14
Modeling and Numerical Simulation of a Vertical Axis Wind Turbine Having Cavity Vanes
2014 · Kadhim Suffer, Ryspek Usubamatov, et al. · International Conference on Intelligent Systems, Modelling and Simulation · 14
Effect of Heat Treatment on Microstructure and Corrosion Behavior of Az91d Magnesium Alloy
2013 · Lih.T Chye, M.Z.M. Zamzuri, et al. · Advanced materials research · 14
Critical heat flux and Leidenfrost temperature on hemispherical stainless steel surface
2019 · S. Illias, N.A. Rosman, et al. · Case Studies in Thermal Engineering · 13
PDF
Experimental and Numerical Analysis of Foam-Filled Aluminum Conical Tubes Subjected to Oblique Impact Loading
2014 · Fauziah Mat, Khairul Azwan Ismail, et al. · Materials Testing · 13
Development of Matlab Simulink model for dynamics analysis of passive suspension system for lightweight vehicle
2017 · M S Jamali, K A Ismail, et al. · Journal of Physics Conference Series · 11
PDF
Development of 3D-printed customized facial padding for burn patients
2018 · Muhammad Aiman Ahmad Fozi, Mohamed Najib Salleh, et al. · Rapid Prototyping Journal · 10
Quasi Static Axial Compression of Thin Walled Aluminum Tubes: Analysis of Flow Stress in the Analytical Models
2015 · Mohd Nizam Yob, Khairul Azwan Ismail, et al. · Modern Applied Science · 9
Warpage Analysis of Single and Dual Gates Designed for Injection Moulding Using Response Surface Methodology
2015 · S.M. Nasir, Khairul Azwan Ismail, et al. · Applied Mechanics and Materials · 9
Prediction of maximum spreading time of water droplet during impact onto hot surface beyond the Leidenfrost temperature
2021 · S. Illias, S. Hussain, et al. · Case Studies in Thermal Engineering · 6
PDF
Evaporation lifetime and boiling curve on hemispherical stainless steel (304) surface
2019 · S Illias, S Hussain, et al. · IOP Conference Series Materials Science and Engineering · 6
PDF
Improvement of Corrosion Resistance of Rare Earth Element (REE)-Based Anodic Oxidation Coating on AZ91D Magnesium Alloy
2012 · M.Z.M. Zain, S. Illias, et al. · Applied Mechanics and Materials · 6
Energy absorption characteristics of corrugated grooves thin-walled structure inspired by nautilus shell biological geometry
2025 · Mohd Hazwan Mohd Hanid, Safian Sharif, et al. · Engineering Research Express · 5
PDF
Works count: 64
Citation count: 582
H-index: 14
I10-index: 19
Year
Topic
Type